One AirPod Not Connecting: The Most Common Causes
When only one AirPod connects to your device, the problem is almost always one of three things: the disconnected AirPod has lost its charge, the two AirPods have lost their connection to each other, or your device is paired with only one AirPod instead of both. The good news is that none of these require a trip to Apple or a replacement — they all fix themselves or respond to straightforward steps you can do right now.
The most frequent culprit is a dead or nearly dead battery in the AirPod that won't connect. AirPods turn off automatically when the battery drops below a certain threshold, and they will not reconnect until they have enough charge. If you have not charged your case in several days, or if one AirPod has been used more than the other, this is almost certainly what happened.
The second most common cause is that your two AirPods have lost sync with each other. AirPods are designed to work as a pair, and occasionally the connection between them breaks — especially if one was left in the case while the other was used, or if they were separated for a long time. When this happens, your device may connect to whichever AirPod it remembers, leaving the other one unable to join the conversation.
Key Takeaways
- Check the battery level of both AirPods in your device's Bluetooth settings — a dead AirPod will not connect no matter what else you do.
- Place both AirPods in the charging case for at least 15 seconds, then remove them together to re-sync them with each other.
- Forget the AirPods from your device's Bluetooth menu and reconnect them as a fresh pair if the above steps do not work.
- If one AirPod still will not connect after these steps, it may have a hardware problem, but this is rare and usually only happens after physical damage or years of heavy use.
Check the Battery Level of the Disconnected AirPod
Your first step is to find out whether the problem is a dead battery. On your iPhone, iPad, or Mac, swipe down from the top right corner (iPhone) or look at the menu bar (Mac) to open Control Center. You should see a battery widget that shows the charge level of your AirPods case and both individual AirPods. If one AirPod shows 0% or no percentage at all, it has run out of power.
If the battery is dead, place that AirPod in the charging case when ready and close the lid. Leave it there for at least 30 minutes. The case will charge the AirPod, and once it reaches about 10% battery, it should be able to connect again. While you wait, you can use the connected AirPod alone, or switch to your device's speaker.
If both AirPods show battery remaining but one still will not connect, move to the next step. The battery is not the problem.
Re-Sync Your AirPods by Placing Them Together in the Case
AirPods stay connected to each other through a wireless link that occasionally breaks, especially if one AirPod has been sitting unused in the case for a while. The fastest way to rebuild this connection is to place both AirPods in the charging case together, close the lid, and wait 15 seconds. Then open the case and remove both AirPods at the same time. They will reconnect to each other automatically.
Once both AirPods are out of the case and you hear a chime in both ears, try playing audio on your device. If both AirPods now produce sound, the problem is solved. If only one still connects, the issue is not a lost sync between the pair — it is a problem between one AirPod and your device itself.
Forget and Reconnect Your AirPods to Your Device
Sometimes your device remembers only one AirPod from a previous connection, and it will not automatically add the second one even though both are powered on. The fix is to erase this incomplete pairing and start fresh.
On iPhone or iPad, go to Settings, then Bluetooth. Find your AirPods in the list of devices. Tap the information icon (a small circle with an "i") next to the AirPods name, then tap "Forget This Device." Confirm the action. Your device will erase the pairing entirely.
On Mac, go to System Settings, then Bluetooth. Find your AirPods, click the three dots next to them, and select "Remove." Now place both AirPods in the case, close the lid for 15 seconds, then open it. Hold the setup button on the back of the case for about 15 seconds until the light inside flashes white. Your AirPods are now in pairing mode. Your device should detect them and ask you to connect — both AirPods will pair together this time.
Check for Interference or Distance Issues
Bluetooth has a range of about 30 feet, but walls, metal objects, and other wireless devices can reduce that distance significantly. If you are far from your device or in a location with heavy wireless traffic (like an airport or crowded office), one AirPod may drop out while the other stays connected.
Move closer to your device and away from other Bluetooth speakers, wireless routers, or microwave ovens. Try playing audio again. If both AirPods now work, the problem was interference or distance. You may need to keep your device closer to you when using AirPods in that location, or use the connected AirPod alone if you need to move farther away.
Restart Your Device and Update AirPods Firmware
A straightforward restart of your iPhone, iPad, or Mac can clear temporary glitches that prevent one AirPod from connecting. Turn your device off completely, wait 10 seconds, and turn it back on. Once it has restarted, place your AirPods in the case and then remove them to reconnect.
AirPods receive firmware updates automatically when they are in the case and your device is nearby with Bluetooth on. If your AirPods have not been updated in several months, an outdated firmware version could be causing connection problems. There is no way to force an update, but leaving your AirPods in the case overnight while your device is plugged in and nearby will usually trigger any pending updates.
When One AirPod May Have a Hardware Problem
If you have completed all the steps above and one AirPod still will not connect — even after charging, re-syncing, forgetting and reconnecting, and restarting your device — the problem may be a hardware fault inside that AirPod. This is uncommon and usually only happens after physical damage, water damage, or several years of heavy daily use.
Hardware problems cannot be fixed at home. You would need to contact Apple Support or visit an Apple Store to have the AirPod inspected. If your AirPods are still under the one-year limited warranty, or if you have AppleCare+, the repair or replacement may be covered. If not, Apple typically charges a fee to replace a single AirPod.
Frequently Asked Questions
Why does my left AirPod keep disconnecting but the right one stays connected?
The left AirPod is usually the primary one your device connects to first. If it keeps disconnecting, the battery is likely low, or there is interference between that specific AirPod and your device. Try charging it fully, then move closer to your device and away from other wireless devices. If it still drops out, forget and reconnect both AirPods as a fresh pair.
Can I use just one AirPod if the other won't connect?
Yes. A single connected AirPod will play audio in mono (one ear) and work normally for calls and music. You do not need both AirPods to use one. However, if you want stereo sound across both ears, both AirPods must be connected.
Will my AirPods automatically reconnect after I fix this?
Once both AirPods are connected and working, they will reconnect automatically whenever you open the case near your device. You will not have to pair them again unless you forget them from your device's Bluetooth settings.
What if I only have one AirPod and I lost the other one?
A single AirPod will still pair and work with your device. However, you will get mono audio instead of stereo. If you want to replace the missing AirPod, you can buy a single replacement AirPod from Apple, though it costs nearly as much as a full new pair.