The most common reason Beats stop connecting is that Bluetooth has been turned off, the headphones are out of range, or they are paired to a different device

When your Beats headphones won't connect, the problem is almost always one of three things: Bluetooth is disabled on your phone or computer, your Beats are already paired to another device and trying to connect to that one instead, or the headphones need to be reset and paired again from scratch. Before you assume the headphones are broken, work through these steps in order — most connection problems clear up in under five minutes.

The reason Beats behave this way is that they remember every device they have ever paired with. If you used them with your laptop yesterday and your phone today, they may try to reconnect to the laptop automatically, even if the laptop is across the room. This is a feature, not a bug — it saves you from pairing them every single time. But it also means you sometimes have to tell them which device you actually want to use right now.

Key Takeaways

  • Check that Bluetooth is turned on in your phone or computer's settings before assuming the headphones are the problem.
  • If your Beats are trying to connect to a different device, forget them from that device first, then pair them fresh to the one you want to use.
  • Beats that have been paired to many devices sometimes need a full reset — hold the power button for 15 seconds until the light flashes, then pair them again.
  • If Beats still will not connect after a reset, check whether your phone or computer's Bluetooth is working at all by trying to pair a different device.

Check Bluetooth is actually turned on

This step sounds obvious, but it catches most people. Open your phone or computer's settings and look for Bluetooth. On an iPhone, swipe down from the top right corner to open Control Center and look for the Bluetooth icon — it should be highlighted in blue if it is on. On Android, swipe down twice from the top to open Quick Settings and tap Bluetooth. On a Mac, click the Apple menu, go to System Settings, then click Bluetooth in the sidebar. On Windows, open Settings, go to Bluetooth & devices, and check that Bluetooth is toggled on.

If Bluetooth is already on, turn it off completely, wait five seconds, and turn it back on. This resets the Bluetooth radio and often clears connection glitches. After you turn it back on, wait a few seconds for your phone or computer to scan for nearby devices — you should see your Beats appear in the list of available devices.

Disconnect your Beats from any other device they are paired with

Beats can only connect to one device at a time, but they remember multiple devices. If you used them with your laptop this morning, they may be trying to reconnect to the laptop even though you want to use them with your phone now. The fix is to tell the laptop to forget the Beats, so they stop trying to reconnect.

On a Mac, go to System Settings, click Bluetooth, find your Beats in the list, click the X next to them, and select Remove. On Windows, go to Settings, click Bluetooth & devices, find your Beats, click the three dots next to them, and select Remove device. On an iPhone, go to Settings, tap Bluetooth, find your Beats, tap the i icon next to them, and select Forget This Device. On Android, go to Settings, tap Connected devices or Bluetooth, find your Beats, and tap Forget or Unpair.

After you have removed them from the other device, go back to the device you want to use them with. Turn Bluetooth on if it is off, and your Beats should appear in the list of available devices. Tap or click the name of your Beats to pair them.

Reset your Beats if they still will not connect

If your Beats are not showing up in the list of available devices at all, or if they appear but will not actually connect, a full reset usually fixes it. The reset process is different depending on which Beats model you have, but the most common method works for Beats Solo, Studio, Pro, and Fit Pro.

Hold down the power button on your Beats for 15 seconds. You will feel the button click under your finger, but keep holding. After about 10 seconds, the light on the headphones will flash red and white — this means the reset is working. Keep holding until the light stops flashing and goes solid white. Release the button. Your Beats are now reset and will not be paired to any device.

Now put your Beats back in pairing mode. On most Beats models, the headphones enter pairing mode automatically after a reset. On your phone or computer, open Bluetooth settings, wait a few seconds, and your Beats should appear in the list of available devices with a name like "Beats Solo" or "Beats Pro." Tap or click the name to pair them. You may be asked to confirm the pairing on both devices — do that, and the connection should hold.

Check that your phone or computer's Bluetooth actually works

If your Beats still will not connect after a reset, the problem may not be the Beats — it may be that Bluetooth is broken on your phone or computer. The way to test this is to try pairing a different Bluetooth device, like a different pair of headphones, a speaker, or even a smartwatch if you have one.

If that other device pairs without trouble, your phone or computer's Bluetooth works fine, and the problem is specific to your Beats. In that case, try the reset one more time, or contact Beats support with the model number of your headphones — you can find it in the settings of the Beats app or on the inside of the headphone band.

If the other device also will not pair, Bluetooth is not working on your phone or computer. On an iPhone or Android phone, try restarting the phone completely — turn it off, wait 10 seconds, and turn it back on. On a Mac or Windows computer, restart the computer the same way. If Bluetooth still does not work after a restart, you may need to take the device to a repair shop or contact the manufacturer, because the Bluetooth hardware itself may be damaged.

Make sure your Beats have enough battery

Beats that are completely out of battery will not connect, and they will not show up in your Bluetooth list at all. If you have not used your Beats in a while, plug them in and let them charge for at least 15 minutes before trying to connect again.

While they are charging, you will see a light on the headphones or charging case — usually red or amber while charging, and green when fully charged. Some Beats models have a battery indicator in the Beats app on your phone, which will show you the exact percentage. If your Beats are charged and still will not connect, move on to the reset step above.

Update the Beats app and your phone or computer's software

Beats headphones work best when both the Beats app on your phone and your phone's operating system are up to date. Outdated software can cause connection problems that a reset alone will not fix.

On an iPhone, open the App Store, tap your profile picture in the top right, scroll down to see pending updates, find the Beats app, and tap Update. On Android, open the Google Play Store, tap your profile icon in the top right, go to Manage apps and device, find the Beats app, and tap Update. After the app updates, restart your phone and try connecting again. You should also check that your phone itself is up to date — on iPhone, go to Settings, tap General, then Software Update. On Android, go to Settings, tap About phone, then System update.

Frequently Asked Questions

Why do my Beats keep disconnecting after I pair them?

Beats disconnect when they are out of range (usually more than 30 feet from your phone), when Bluetooth is turned off, or when the battery is very low. They also disconnect if you pair them to a different device — the first device loses the connection automatically. If they disconnect randomly even when you are close to your phone and the battery is full, try forgetting them and pairing again, or do a full reset.

Can I use my Beats with two devices at the same time?

No. Beats can only connect to one device at a time. If you want to switch from your phone to your laptop, you have to disconnect them from your phone first, then pair them to your laptop. Some newer Beats models have a feature called multipoint that lets them stay connected to two devices and switch between them automatically, but you have to turn this feature on in the Beats app first.

My Beats are showing in Bluetooth settings but won't actually connect — what do I do?

This usually means the pairing is stuck. Forget the Beats from your phone or computer, do a full reset on the Beats themselves by holding the power button for 15 seconds, and then pair them fresh. If that does not work, restart your phone or computer completely and try pairing again.

How do I know if my Beats are in pairing mode?

Most Beats show a flashing light — usually white or blue — when they are in pairing mode and waiting for you to connect them to a device. If you just reset your Beats, they enter pairing mode automatically. If you need to put them back in pairing mode manually, hold the power button for about five seconds until the light flashes, then release.

What if I forgot which device my Beats are paired to?

The easiest way is to do a full reset — hold the power button for 15 seconds until the light flashes red and white, then release. After a reset, your Beats are not paired to anything and will enter pairing mode automatically. Then pair them to whichever device you want to use them with.