Start with the basics: Bluetooth and power

AirPods Max won't connect because Bluetooth is either off on your device, the headphones are out of range, or the pairing has dropped. Before troubleshooting anything complex, check three things: whether Bluetooth is actually enabled on your phone or computer, whether the AirPods Max have enough battery (they need at least 5 percent), and whether you're within 30 feet of the device you're trying to connect to.

If Bluetooth is on and the headphones have power, turn the AirPods Max off completely by holding the noise control button for three seconds until you hear a sound. Wait five seconds, then turn them back on. This clears temporary connection glitches that account for most connection failures.

Check the battery by opening Control Center on your iPhone or iPad (swipe down from the top right) or by clicking the Bluetooth icon on your Mac. You should see the AirPods Max listed with a percentage. If the battery is below 5 percent, plug them in for at least 15 minutes before trying again.

Key Takeaways

  • Turn Bluetooth off and back on your device, then restart the AirPods Max by holding the noise control button for three seconds.
  • Make sure the AirPods Max have at least 5 percent battery and you are within 30 feet of the device you want to connect to.
  • If the headphones still won't connect, forget them from your device's Bluetooth settings and pair them again from scratch.
  • On Mac, Windows, or Android devices, you may need to manually select the AirPods Max from the Bluetooth menu instead of waiting for automatic connection.
  • If connection keeps dropping after pairing, reset the AirPods Max by holding both the noise control button and the digital crown for 15 seconds.

Forget and re-pair the headphones

If restarting didn't work, the pairing itself may be corrupted. Go to your device's Bluetooth settings and find AirPods Max in the list of paired devices. On iPhone or iPad, tap the info icon next to the name and select "Forget This Device." On Mac, open System Settings, go to Bluetooth, find AirPods Max, click the X next to it, and confirm. On Windows or Android, the process is similar — find the device in Bluetooth settings and remove it.

Once you've forgotten the headphones, put the AirPods Max back in pairing mode. Hold the noise control button for about three seconds until the LED on the back flashes amber. Your device should now see them as a new device available to pair. Select them from the Bluetooth menu and confirm the pairing.

This process usually takes less than a minute and fixes most connection problems that a straightforward restart didn't solve. The headphones will remember this pairing for future use.

Connecting to devices other than iPhone

AirPods Max connect automatically to your primary Apple device — usually the iPhone you set them up with. Connecting to a Mac, iPad, Apple Watch, or a second iPhone requires a manual step that many people miss.

On Mac, click the Bluetooth icon in the menu bar, find AirPods Max in the list, and click "Connect." On a second iPhone or iPad, go to Settings, tap Bluetooth, find AirPods Max, and tap the name. On Windows or Android devices, open Bluetooth settings, search for available devices, and select AirPods Max when it appears. The headphones will stay connected to that device until you manually switch them to another one.

If the AirPods Max are already paired to your iPhone, they may not show up in your Mac's Bluetooth menu until you disconnect them from the iPhone first. You can switch between devices by using the audio output menu on each device, but the headphones can only actively connect to one at a time.

Check for interference and range issues

Bluetooth operates on the 2.4 GHz frequency, which is crowded. Microwaves, Wi-Fi routers, wireless mice, and other Bluetooth devices in the same room can interfere with your connection. If your AirPods Max connect fine in one room but not another, interference is likely the cause.

Move away from Wi-Fi routers and other wireless devices, or move the router itself. If you're in an office or apartment building with many Wi-Fi networks, the interference may be unavoidable in that location. Try connecting in a different room or at a different time of day when fewer devices are active.

Range is also a factor. AirPods Max work best within 30 feet of your device. If you're trying to connect from farther away — for example, from another room with thick walls between you and your phone — move closer and try again.

Reset the AirPods Max completely

If the headphones still won't connect after forgetting and re-pairing, perform a full reset. Hold both the noise control button and the digital crown (the button on the right side) for 15 seconds. You'll hear a sound and the LED will flash amber, then white. Release both buttons. The AirPods Max are now reset to factory settings and all previous pairings are erased.

After the reset, put the headphones back in pairing mode by holding the noise control button for three seconds until the LED flashes amber. Pair them to your device as if they were brand new. This clears any software glitches that simpler troubleshooting steps missed.

A full reset takes about two minutes and solves persistent connection problems in most cases. You'll need to re-pair the headphones to all your devices afterward.

When to check for hardware problems

If the AirPods Max still won't connect after a full reset and re-pairing, a hardware problem is possible but uncommon. Check whether the Bluetooth antenna inside the headphones is damaged by testing them with a different device. Borrow someone else's iPhone, iPad, or Mac and try pairing the AirPods Max to it. If they won't connect to any device, the problem is likely with the headphones themselves.

Also verify that your device's Bluetooth hardware is working by pairing a different set of headphones or a Bluetooth speaker to it. If other Bluetooth devices connect fine but the AirPods Max don't, the issue is specific to the headphones.

If you've confirmed the headphones have a hardware problem and they're still under warranty (typically one year from purchase), contact Apple Support or visit an Apple Store. If they're out of warranty, repair or replacement will cost money.

Frequently Asked Questions

Why do my AirPods Max keep disconnecting after they connect?

Disconnections usually mean Bluetooth interference, low battery, or a corrupted pairing. First, charge the headphones fully. Then forget them from your device's Bluetooth settings and re-pair them. If disconnections continue, try using the headphones in a different location away from Wi-Fi routers and other wireless devices.

Can I connect AirPods Max to two devices at the same time?

No. AirPods Max can only actively connect to one device at a time. You can pair them to multiple devices, but you'll need to manually switch which device they're connected to using that device's audio output menu. The switch usually takes a few seconds.

Do I need to unpair AirPods Max before selling them?

Yes. Perform a full reset by holding the noise control button and digital crown for 15 seconds. This erases all pairings and returns the headphones to factory settings so the new owner can pair them to their own devices.

Why won't my AirPods Max show up in Bluetooth settings at all?

Make sure the headphones have battery (at least 5 percent), are turned on, and are in pairing mode. Hold the noise control button for three seconds until the LED flashes amber. If they still don't appear, try the full reset: hold both the noise control button and digital crown for 15 seconds, then put them back in pairing mode.

Can I connect AirPods Max to Android or Windows devices?

Yes. Open Bluetooth settings on your Android phone or Windows computer, search for available devices, and select AirPods Max when it appears. Connection works the same way as with Apple devices, though some features like automatic switching between devices won't work on non-Apple platforms.