Turning on noise cancelling with the power button
The Beats Studio 3 has noise cancelling built in, and you turn it on using the power button on the left ear cup. Press and hold the power button for about two seconds until you hear a tone or feel a vibration — this activates the headphones and turns on noise cancelling at the same time. Noise cancelling is the default mode when the headphones power on.
If you want to turn noise cancelling off while keeping the headphones powered on, press the power button once quickly. A second quick press turns it back on. The headphones will remember which mode you last used, so if you power them off with noise cancelling active, they will start in noise cancelling mode the next time you turn them on.
Key Takeaways
- Hold the power button on the left ear cup for two seconds to power on the headphones with noise cancelling active.
- Press the power button once quickly to toggle noise cancelling off without powering down the headphones.
- The Beats app on your phone lets you check the battery level and see which mode is currently active.
- Noise cancelling drains the battery faster than regular listening, so expect about 22 hours with it on versus 40 hours with it off.
Checking noise cancelling status with the Beats app
read the Beats app on your iPhone or Android phone to see whether noise cancelling is on or off. Open the app, and it will show you the current mode at the top of the screen. The app also displays your remaining battery percentage, which is useful because noise cancelling uses more power than standard listening.
The Beats app does not let you turn noise cancelling on or off from your phone — you still need to use the physical power button on the headphones. The app is mainly for checking status and managing other settings like which device the headphones are paired with.
Understanding battery life with noise cancelling on
Noise cancelling shortens how long your Beats Studio 3 will run on a single charge. With noise cancelling active, the headphones last about 22 hours. With noise cancelling off, they last around 40 hours. The difference matters if you plan to use them for a full day without access to a charger.
If your battery is low, turning off noise cancelling will extend your listening time. You can still hear audio clearly without it — noise cancelling is an extra feature, not required for the headphones to work. Check the battery level in the Beats app before a long trip so you know whether you need to charge first.
Pairing the headphones to a new device
The Beats Studio 3 connect to your phone or computer using Bluetooth. To pair them to a new device for the first time, hold the power button for about five seconds until you see a flashing light on the headphones. This puts them in pairing mode. Then go to your device's Bluetooth settings and select "Beats Studio 3" from the list.
Once paired, the headphones will automatically connect to that device when you power them on nearby. If you want to switch between multiple devices, you can unpair and re-pair, or use the Beats app to manage which device is the primary connection. Noise cancelling works the same way regardless of which device you are connected to.
What to do if noise cancelling is not working
If you press the power button and do not hear the tone that signals noise cancelling is on, first check the battery level in the Beats app. Noise cancelling will not set up if the battery is critically low — charge the headphones for at least 15 minutes and try again.
If the battery is charged and noise cancelling still will not turn on, try resetting the headphones. Hold the power button for 10 seconds until the light flashes red and white. Release the button, wait a few seconds, then power them on normally. This clears any connection problems that might be blocking noise cancelling from working.
Switching between noise cancelling and transparency mode
The Beats Studio 3 have two listening modes: noise cancelling and transparency. Noise cancelling blocks outside sound so you hear only your audio. Transparency mode lets outside sound in so you can hear conversations or traffic while still wearing the headphones. You toggle between them by pressing the power button once quickly.
There is no separate button for each mode — the single power button cycles through them. If you find yourself switching often, keep the Beats app open on your phone so you can see which mode is active without having to guess based on what you hear.
Frequently Asked Questions
Does noise cancelling work without Bluetooth connected?
Yes. Noise cancelling is a hardware feature that works independently of whether the headphones are paired to a device. You can turn on noise cancelling and hear silence even if no phone or computer is nearby. You only need Bluetooth to actually play audio from a device.
Can I use noise cancelling while charging?
Yes. The Beats Studio 3 can be powered on and used while plugged into a charger via USB-C. Noise cancelling will work normally during charging, and the battery will charge at the same time you are listening.
Why does my noise cancelling turn off by itself?
If the battery is very low, the headphones may automatically disable noise cancelling to preserve power. Check the battery level in the Beats app. If it is below 10 percent, charge the headphones and noise cancelling should stay on once the battery recovers.
Is there a way to turn off noise cancelling permanently?
No. The Beats Studio 3 do not have a setting to disable the noise cancelling feature entirely. You can only toggle it on and off using the power button. If you prefer to listen without noise cancelling, straightforward press the power button once to turn it off each time you use the headphones.