Turning on noise cancelling with the Control Center

The fastest way to turn on noise cancelling is through your iPhone's Control Center. Swipe down from the top-right corner of your screen (or up from the bottom if you have an older iPhone), then find the audio card — it shows a speaker icon and the name of your connected AirPods.

Press and hold on that audio card. A menu appears with three noise control options: Active Noise Cancellation, Transparency, and Off. Tap Active Noise Cancellation to turn it on. The setting takes effect when ready.

This method works on any iPhone running iOS 16.1 or later. If you don't see the audio card in Control Center, your AirPods 3 may not be connected — check Settings > Bluetooth and reconnect them first.

Key Takeaways

  • Noise cancelling on AirPods 3 turns on through Control Center by swiping down and holding the audio card, then selecting Active Noise Cancellation.
  • You can also turn on noise cancelling by holding down the stem of one AirPod for two seconds until you hear a chime, then selecting the mode you want.
  • AirPods 3 have two noise modes: Active Noise Cancellation blocks outside sound, and Transparency lets you hear your surroundings while still wearing them.
  • Noise cancelling works best when your AirPods fit snugly in your ears — a loose fit reduces how much sound gets blocked.

Using the stem button to switch noise modes

You can also control noise cancelling directly from your AirPods without touching your phone. Hold down the stem (the flat part below the speaker) on either AirPod for about two seconds. You'll hear a chime, and a voice prompt tells you which mode you're switching to.

Each time you hold the stem, it cycles through your three options: Active Noise Cancellation, Transparency, and Off. Keep holding until you reach the mode you want, then release. This is useful when your phone is in another room or you're driving and can't look at the screen.

If the stem button doesn't respond, make sure your AirPods are in your ears — they won't respond to stem presses when they're in the case or sitting on a table.

What Active Noise Cancellation actually does

Active Noise Cancellation (often called ANC) uses tiny microphones on your AirPods to listen to the sound around you, then plays an inverted sound wave through the speaker to cancel it out. The result is that low, constant sounds — airplane engines, traffic, air conditioning hum — become much quieter.

It works less well on sudden or high-pitched sounds like a car horn or someone shouting. Noise cancelling also works best when your AirPods fit snugly — if they're loose in your ear, the microphones can't pick up outside sound well enough to cancel it.

Noise cancelling uses battery faster than regular listening. If you're on a long flight or commute, you may notice your AirPods run out of power sooner than they would with noise cancelling off.

Understanding Transparency mode

When you cycle past Active Noise Cancellation, you reach Transparency mode. This does the opposite of noise cancelling — it amplifies outside sound so you can hear conversations, traffic, or announcements while your AirPods are still in your ears.

Transparency is useful when you're walking outside, in a store, or anywhere you need to stay aware of your surroundings. The microphones pick up sound and play it through the speaker, so you hear the world around you at a natural volume.

You can switch between Transparency and Active Noise Cancellation as often as you want throughout the day. There's no limit to how many times you toggle between them.

Checking your AirPods battery while using noise cancelling

Noise cancelling drains your AirPods battery faster than normal listening, so it's worth checking your battery level before a long trip. Open Control Center the same way you turned on noise cancelling — swipe down from the top-right corner — and look at the battery percentage shown on the audio card.

If your battery is below 20 percent, consider turning off noise cancelling for the rest of your listening time, or put your AirPods back in the case to charge them. A full charge on AirPods 3 gives you about six hours of listening with noise cancelling on, or up to thirty hours total with the case.

Troubleshooting when noise cancelling won't turn on

If you hold the stem and hear nothing, or if the noise cancelling option doesn't appear in Control Center, your AirPods may not be fully connected. Go to Settings > Bluetooth on your iPhone, find your AirPods in the list, and tap the information icon next to them. Tap "Forget This Device," then hold the setup button on the back of your AirPods case for fifteen seconds until the light flashes white. Hold your iPhone near the case and follow the pairing steps.

If noise cancelling still doesn't work after reconnecting, restart your iPhone by powering it off and back on. Then try Control Center again. If the problem continues, your AirPods may have a hardware issue — contact Apple Support with your AirPods serial number, which you can find in Settings > Bluetooth by tapping the information icon next to your AirPods.

Noise cancelling also won't work if your AirPods are too loose in your ears. Try adjusting them so they sit deeper in your ear canal, or try the other size of ear tip if your case includes multiple sizes.

Frequently Asked Questions

Does noise cancelling work on Android phones?

No. AirPods 3 are designed for Apple devices. While you can pair them with Android phones for regular listening, the noise cancelling controls only work through Apple's Control Center, which is not available on Android. You can still use the stem button to cycle through modes on Android, but the voice prompt may not work reliably.

Will noise cancelling drain my battery in one hour?

No. With noise cancelling on, AirPods 3 last about six hours on a full charge. Battery drains faster than with noise cancelling off, but not dramatically. If you're worried about battery on a long trip, bring the case with you so you can charge them during a break.

Can I use noise cancelling and Transparency at the same time?

No. You can only use one mode at a time: Active Noise Cancellation, Transparency, or Off. You switch between them by holding the stem or using Control Center. Some other headphones offer a mixed mode, but AirPods 3 do not.

Why does noise cancelling sound muffled or weird?

This is normal when you first turn on noise cancelling — your ears adjust to the change in air pressure inside the sealed earbud. If the sound stays muffled after a minute, your AirPods may not fit snugly enough. Try a different ear tip size or adjust how deep they sit in your ear. A loose fit makes noise cancelling sound hollow or strange.

Does noise cancelling work if I'm wearing only one AirPod?

Yes. Noise cancelling works on whichever AirPod is in your ear, whether you're wearing one or both. If you're wearing only one, the other can stay in the case and won't drain battery.