Noise canceling on AirPods works by using built-in microphones to listen to outside sound, then playing the opposite sound wave to cancel it out
Your AirPods have three noise modes: Active Noise Cancellation (blocks outside sound), Transparency (lets outside sound in so you can hear your surroundings), and Off (no noise control). You switch between them by pressing and holding the stem on one AirPod, or by using your iPhone, iPad, or Mac settings. The exact steps depend on which AirPods model you own and what device you are using.
Noise canceling works best on steady, low sounds like airplane engines or traffic. It is less effective on sudden noises like a door slamming or someone speaking directly to you. The feature drains your battery faster than normal listening, so you may notice shorter playtime when it is on.
Key Takeaways
- Press and hold the stem on either AirPod for about three seconds to cycle through Active Noise Cancellation, Transparency, and Off modes.
- You can also control noise modes from your iPhone, iPad, or Mac by opening Control Center or Settings and selecting the audio device.
- Active Noise Cancellation works best on constant background noise like engine sound and less well on sudden or high-pitched sounds.
- Noise canceling uses more battery power than regular listening, so battery life will be shorter when the feature is turned on.
- Make sure your AirPods firmware is up to date, because older versions may have noise canceling issues that newer updates fix.
How to turn on noise canceling using the stem
The quickest way to turn on noise canceling is to use the physical stem on your AirPod. Press and hold the stem on either the left or right AirPod for about three seconds. You will hear a chime or feel a haptic tap (a small vibration), and the mode will change.
Each time you hold the stem, you cycle through the three modes in order: Active Noise Cancellation, Transparency, and Off. Keep pressing until you reach the mode you want. You do not need to do this on both AirPods — pressing the stem on just one will change the mode for both.
If nothing happens when you press the stem, your AirPods may not support noise canceling. Only AirPods Pro (both generations), AirPods Max, and some newer AirPods models have this feature. Standard AirPods and AirPods 3 do not have active noise canceling.
How to control noise modes from your iPhone or iPad
Open Control Center by swiping down from the top-right corner of your screen (on newer iPhones) or swiping up from the bottom (on older models). Look for the audio device card — it will show your AirPods name and a volume slider.
Press and hold the audio card to expand it. You will see three buttons at the bottom: one for Active Noise Cancellation, one for Transparency, and one for Off. Tap the one you want. The mode will change when ready on your AirPods.
If you do not see the audio card in Control Center, your AirPods may not be connected. Open Settings, go to Bluetooth, and make sure your AirPods are listed and show as Connected. If they are not paired at all, tap them in the list and follow the pairing steps.
How to control noise modes from your Mac
Click the Control Center icon in the top-right corner of your menu bar (it looks like a grid of squares). Scroll down to find the audio device card showing your AirPods.
Click the audio device card to expand it. You will see the three noise mode buttons: Active Noise Cancellation, Transparency, and Off. Click the one you want to switch to it.
If your AirPods do not appear in Control Center, open System Settings, go to Bluetooth, and check that your AirPods are listed and connected. You may need to click them in the list and select Connect.
Why noise canceling might not be working
If you press the stem and nothing happens, or if the modes do not seem to change, start by checking that your AirPods model actually has noise canceling. AirPods Pro (1st and 2nd generation) and AirPods Max have it. Standard AirPods, AirPods 2, AirPods 3, and AirPods Pro Max do not.
Next, make sure your AirPods firmware is current. Open your iPhone, go to Settings, then Bluetooth, then tap the information icon next to your AirPods name. Look for the firmware version listed. If you are not sure whether it is the latest, connect your AirPods to power and keep them near your iPhone for a few minutes — they will update automatically if a newer version is available.
If noise canceling still does not work after a firmware update, try resetting your AirPods. Go to Settings, Bluetooth, tap the information icon next to your AirPods, and select Forget This Device. Then put your AirPods back in their case, hold the setup button on the back for 15 seconds until the light flashes amber, and pair them again from scratch.
How to get the best results from noise canceling
Noise canceling works by detecting and canceling out repeating sound patterns. It is very good at blocking steady, low-frequency noise like airplane engines, air conditioning, or traffic. It is much less effective at blocking sudden sounds, high-pitched noises, or human speech.
For the best results, make sure your AirPods fit snugly in your ears. If they are loose, sound will leak in around the edges and noise canceling will not work as well. If you have AirPods Pro, try the different ear tip sizes — the small, medium, and large tips come in the box. A proper fit makes a big difference.
Keep in mind that using noise canceling drains your battery faster than listening without it. If you are on a long flight or commute and want to save battery, switch to Transparency mode or Off when you do not need active cancellation.
Transparency mode: hearing the world while wearing AirPods
Transparency mode is the opposite of noise canceling. It uses the same microphones to pick up outside sound and play it through your AirPods, so you can hear what is happening around you without taking them out.
This is useful when you are in a situation where you need to stay aware — walking outside, working in an office, or talking to someone in the same room. You can hear their voice clearly without removing your AirPods. Switch to Transparency the same way you switch to noise canceling: press and hold the stem, or use Control Center on your iPhone or Mac.
Transparency mode also uses extra battery, though usually not quite as much as active noise canceling. If you want maximum battery life, switch to Off mode, which disables both noise canceling and transparency.
Frequently Asked Questions
Does noise canceling work on phone calls?
Yes. When you are on a call, your AirPods use noise canceling to reduce background sound on your end so the person you are talking to hears you more clearly. You can still switch between Active Noise Cancellation and Transparency modes during a call using the stem or Control Center.
Why does my battery drain so fast when noise canceling is on?
Active noise canceling requires the microphones and processors inside your AirPods to run constantly, which uses significantly more power than just playing audio. If battery life is a concern, use Transparency mode instead, which uses less power but still lets you hear your surroundings.
Can I use noise canceling with only one AirPod in?
Yes. Noise canceling works on whichever AirPod is in your ear, whether it is the left or right. However, the effect will be less noticeable with only one AirPod because you are only blocking sound in one ear.
What if my AirPods Pro are old — do they have the same noise canceling as new ones?
The first generation of AirPods Pro has noise canceling, but Apple has improved the feature in newer models and through software updates. Make sure your firmware is current by connecting to your iPhone and letting them update automatically. Older hardware will not match the newest performance, but updates can still improve what you have.
Does noise canceling work better with certain types of music?
Noise canceling works independently of what you are listening to — it blocks outside sound regardless of whether you are playing music, a podcast, or nothing at all. However, you may notice the effect more with quiet content like spoken word, because loud music can mask outside noise on its own.