Connect via Bluetooth in three steps
The Sony WH-1000XM4 connects to phones, computers, and tablets through Bluetooth, a wireless standard built into most devices. The headphones pair once, then reconnect automatically when you turn them on near a device they recognize.
Turn on the headphones by pressing the power button on the right ear cup for two seconds. The LED indicator will flash blue, meaning the headphones are in pairing mode and searching for a device to connect to. This mode lasts about five minutes.
On your phone or computer, open the Bluetooth settings menu. On iPhone, go to Settings > Bluetooth and toggle it on. On Android, go to Settings > Connected Devices > Bluetooth. On Windows, go to Settings > Devices > Bluetooth & Other Devices. On Mac, go to System Preferences > Bluetooth. Look for "WH-1000XM4" in the list of available devices and tap it to pair.
Once paired, the headphones will show as "Connected" in your Bluetooth menu. You can now play audio from that device through the headphones. The next time you turn on the headphones near the same device, they will reconnect without needing to pair again.
Key Takeaways
- Press the power button for two seconds to enter pairing mode, which lasts about five minutes and shows a blue flashing light.
- Open Bluetooth settings on your phone or computer, find "WH-1000XM4" in the available devices list, and tap it to pair.
- After the first pairing, the headphones reconnect automatically whenever you turn them on near the same device.
- You can pair the headphones with up to eight devices, though they connect to only one at a time.
- If pairing fails, turn off the headphones, wait five seconds, and try again from the Bluetooth settings menu.
Pair with multiple devices
The WH-1000XM4 can remember up to eight paired devices. This means you can pair them once with your phone, once with your laptop, and once with a tablet, then switch between them without re-pairing each time.
To pair a second device, turn on the headphones and press and hold the power button for seven seconds until you hear a voice prompt saying "Pairing". This enters pairing mode again. Then open Bluetooth settings on the new device and select "WH-1000XM4" from the list.
When both devices are nearby and the headphones are on, they will stay connected to whichever device you last used them with. To switch to a different device, open Bluetooth settings on that device and select the headphones. The connection will switch within a few seconds.
Use the Sony Headphones Connect app for extra features
Sony makes a free app called Sony Headphones Connect, available on iPhone and Android, that unlocks additional settings for the WH-1000XM4. read it from the App Store or Google Play Store.
Open the app and tap "Add a Device". The app will search for nearby headphones and show "WH-1000XM4" in the list. Tap it to connect. The app does not pair the headphones again — it just links to the Bluetooth connection you already made.
Through the app, you can adjust noise cancellation levels, customize the touch controls on the ear cups, set an automatic power-off timer, and update the headphone firmware when Sony releases new versions. You can also see the battery percentage and enable features like Speak-to-Chat, which pauses music when you start talking.
Troubleshoot connection problems
If the headphones will not pair, first check that Bluetooth is turned on in your device's settings. Then turn off the headphones completely by pressing the power button for three seconds until the LED goes dark. Wait five seconds, then press the power button for two seconds to turn them back on and enter pairing mode again.
If the headphones still do not appear in your Bluetooth list, they may have been paired to a different device that is currently nearby. Turn off Bluetooth on all other devices, then try pairing again. Some devices, like older laptops, may need you to "forget" the headphones from their Bluetooth settings and pair from scratch.
If the headphones connect but the audio is quiet or cuts out, check that the volume is turned up on both the headphones and your device. The WH-1000XM4 has its own volume control separate from your phone or computer volume. You can adjust it by swiping up or down on the right ear cup.
If you hear audio from both the headphones and your device speaker at the same time, your device may not have fully switched to the headphones as the audio output. Go back to Bluetooth settings and make sure the WH-1000XM4 is listed as the active audio device, not just as a paired device.
Connect via USB cable for wired mode
The WH-1000XM4 can also connect to a computer using the included USB-C cable, which charges the headphones and allows wired audio at the same time. This is useful if you want to use the headphones while they charge or if you prefer a wired connection for lower latency during gaming or video calls.
Plug the USB-C cable into the port on the left ear cup and the other end into a USB-A port on your computer. The headphones will appear as an audio device in your computer's sound settings. On Windows, go to Settings > Sound > Volume and Device Preferences, then select "WH-1000XM4" from the Output Devices list. On Mac, go to System Preferences > Sound > Output and select "WH-1000XM4".
When connected via USB, the headphones will still work with Bluetooth if you have it turned on. Your computer will use the USB connection for audio by default, but you can switch back to Bluetooth in your sound settings if needed.
Reset the headphones to factory settings
If the headphones are not connecting to any device or behaving unexpectedly, you can reset them to factory settings. This erases all paired devices and returns the headphones to the state they were in when new.
Turn off the headphones. Then press and hold both the power button and the noise cancellation button (on the left ear cup) for about ten seconds. You will hear a voice prompt saying "Initializing", and the LED will flash. Release the buttons and wait for the reset to complete, which takes about 30 seconds.
After the reset, the headphones will be in pairing mode and ready to pair with a device again. You will need to pair them with your phone or computer using the Bluetooth settings menu, just as you did the first time.
Frequently Asked Questions
Why do my headphones keep disconnecting from my phone?
This usually happens when another device is nearby that the headphones are also paired with. The headphones may switch between devices if both are sending signals. Turn off Bluetooth on the other device, or go to Bluetooth settings on your phone and make sure the WH-1000XM4 is set as the active audio device. If the problem continues, forget the headphones from your phone's Bluetooth settings and pair them again from scratch.
Can I use the headphones with two devices at the same time?
No, the WH-1000XM4 can only play audio from one device at a time. However, they can be paired to multiple devices and will stay connected to whichever one you last used. To switch, open Bluetooth settings on the device you want to use and select the headphones.
Do I need the Sony app to use the headphones?
No, the headphones work fully without the app. Bluetooth pairing and audio playback work on any device with Bluetooth. The Sony Headphones Connect app is optional and only adds extra features like noise cancellation adjustment and firmware updates.
What should I do if the headphones are stuck in pairing mode?
Turn off the headphones by pressing the power button for three seconds until the LED goes dark. Wait five seconds, then turn them back on normally by pressing the power button for two seconds. They should exit pairing mode and reconnect to the last device they were paired with.
Can I connect the headphones to my car's Bluetooth system?
Yes, the WH-1000XM4 can pair with any device that supports Bluetooth, including car audio systems. Enter pairing mode on the headphones and search for them in your car's Bluetooth menu. Once paired, they will reconnect automatically when you get in the car and turn on the audio system.