You can connect two AirPods at the same time to your Mac, but only one pair will play audio
Your Mac allows you to pair multiple AirPods in Bluetooth settings, but the system will only send sound to one pair at a time. If you want both pairs to play audio simultaneously — so two people can listen together — you need to use audio sharing, a feature built into newer Macs and AirPods models. Without audio sharing, the second pair will stay connected but silent.
The method you use depends on what you're trying to do: pair two different AirPods for switching between them, or enable both to play the same audio at once. This guide covers both paths.
Key Takeaways
- Pairing two AirPods means adding both to your Mac's Bluetooth list, but only one will play audio unless you use audio sharing.
- Audio sharing requires macOS 13.1 or later and AirPods Pro, AirPods Max, or AirPods 3rd generation or newer.
- To pair a second AirPods, hold the setup button on the case until the light flashes white, then select it in Mac Bluetooth settings.
- To play audio on both pairs at once, open Control Center, click the volume icon, and select both AirPods from the audio output menu.
- If audio sharing doesn't appear, check your Mac and AirPods model — older versions don't support the feature.
Pairing a second AirPods to your Mac
Start by putting your second AirPods into pairing mode. Open the case and hold the small button on the back of the case for about 15 seconds until the light inside flashes white. The light will blink amber and white while pairing, then turn white when ready.
On your Mac, go to System Settings (or System Preferences on older macOS versions). Click Bluetooth in the left sidebar. Your second AirPods should appear in the list of available devices. Click the Connect button next to them. Your Mac will now have both AirPods paired.
Once both pairs are paired, your Mac remembers them. The next time you open either case near your Mac, they will connect automatically — but only one will receive audio. To switch which pair plays sound, go back to Bluetooth settings and click the one you want to use.
Enabling audio sharing so both AirPods play at once
Audio sharing lets two AirPods play the same audio from your Mac simultaneously. This only works if your Mac runs macOS 13.1 or later and both AirPods are AirPods Pro, AirPods Max, or AirPods 3rd generation or newer. Older AirPods 2 models do not support audio sharing.
Make sure both AirPods are already paired to your Mac (see the section above). Then open Control Center by clicking the icon in the top-right corner of your screen (it looks like a grid or cluster of dots). Look for the volume icon — it shows a speaker symbol. Click it.
A menu will drop down showing audio output options. You should see both AirPods listed. Click on the first pair, then hold down the Shift key and click on the second pair. Both should now show as selected. Audio from your Mac will now play on both pairs at the same time.
What to do if audio sharing doesn't appear
If you don't see the option to select multiple AirPods in the volume menu, your setup doesn't meet the requirements. Check that your Mac is running macOS 13.1 or later by going to System Settings, clicking General, then About. Look at the macOS version number.
Also verify your AirPods model. Audio sharing works only with AirPods Pro (any generation), AirPods Max, or AirPods 3rd generation and newer. If you have AirPods 2 or the original AirPods, audio sharing is not available. You can check your AirPods model by opening the case near your Mac, going to System Settings > Bluetooth, and looking at the model name listed next to your AirPods.
Switching between AirPods when both are paired
When you have two AirPods paired to your Mac, you can switch which pair plays audio without unpairing either one. Open Control Center, click the volume icon, and select the AirPods you want to use. Your Mac will when ready switch audio output to that pair.
You can also switch from the menu bar. Click the Bluetooth icon in the top-right corner of your screen, find your AirPods in the list, and click the one you want. This is faster than opening Control Center if you're switching frequently.
Disconnecting one AirPods while keeping it paired
If you want to stop one AirPods from connecting automatically but keep it paired for later use, open Control Center, click Bluetooth, find the AirPods, and click the information icon (an "i" in a circle) next to it. Select Disconnect. The AirPods will stay in your paired list but won't connect the next time you open the case.
To fully unpair an AirPods so it no longer appears in your Bluetooth list, click that same information icon and select Forget This Device. You'll need to put it back into pairing mode and add it again if you want to use it with your Mac later.
Troubleshooting when audio won't play on the second AirPods
If you've enabled audio sharing but only one pair is producing sound, check that both AirPods are actually selected in the volume menu. Open Control Center, click the volume icon, and confirm both pairs show as selected. If only one is highlighted, click the other one while holding Shift.
If the second AirPods still won't play, restart both pairs by closing their cases for 10 seconds, then opening them again. Also restart your Mac by going to System Settings > General > Shut Down. After your Mac restarts, open both AirPods cases and try audio sharing again.
If you're still having trouble, one AirPods may have lost its pairing. Forget both from your Mac's Bluetooth settings, put both into pairing mode, and pair them again from scratch. This usually resolves audio sharing problems.
Frequently Asked Questions
Can I use AirPods 2 with audio sharing?
No. Audio sharing only works with AirPods Pro, AirPods Max, or AirPods 3rd generation and newer. AirPods 2 and the original AirPods do not support this feature. You can still pair them to your Mac, but only one pair will play audio at a time.
What Mac models support audio sharing?
Any Mac running macOS 13.1 or later supports audio sharing. This includes MacBook Air, MacBook Pro, Mac mini, iMac, Mac Studio, and Mac Pro models from recent years. Check your macOS version in System Settings > General > About to confirm you have 13.1 or later.
Will audio sharing work if one AirPods is low on battery?
Yes, as long as both AirPods have enough charge to stay connected. If one AirPods dies while audio sharing is active, your Mac will stop playing audio on that pair but continue on the other. Charge the dead pair and reconnect it to resume audio sharing.
Can I use audio sharing with one AirPods and one other Bluetooth speaker?
No. Audio sharing only works between two AirPods. If you want to play audio on a different Bluetooth device, you'll need to disconnect the second AirPods and pair the other device instead.
Do both AirPods need to be the same model?
No. You can pair two different AirPods models to your Mac and switch between them. However, for audio sharing to work, both pairs must be compatible models — both must be AirPods Pro, AirPods Max, or AirPods 3rd generation or newer.