The basic connection process for Turtle Beach Stealth 600

The Turtle Beach Stealth 600 connects to Xbox One and Xbox Series X|S through a wireless USB dongle that comes in the box. You plug the dongle into any USB port on your console, power on the headset, and it pairs automatically — no additional software or account setup required. The whole process takes about two minutes.

The Stealth 600 does not connect via Bluetooth or the Xbox app. It uses a proprietary 2.4 GHz wireless connection that only works with the included dongle, so you cannot pair it with your phone or PC using the same method you would use with other wireless headsets.

Key Takeaways

  • Insert the USB dongle into any USB port on your Xbox, then turn on the headset — pairing happens automatically without pressing buttons or entering codes.
  • The Stealth 600 uses a proprietary wireless connection, not Bluetooth, so it only works with the included dongle and only on Xbox consoles.
  • If the headset does not pair on the first try, restart both the console and the headset, then wait 30 seconds before powering the headset back on.
  • The headset stores your audio settings in its own memory, so your chat and game volume levels stay the same each time you connect.

What you need before you start

Check that you have the USB dongle that came with your Stealth 600. This small rectangular piece is essential — without it, the headset will not connect to your Xbox. If you have lost the dongle, Turtle Beach sells replacements, though they cost money and take time to arrive.

Make sure your Xbox has a free USB port. The console has multiple ports, so this is usually not a problem, but if you have other USB devices plugged in (external storage, a controller charging dock, a capture card), you may need to unplug one temporarily to test the connection.

Charge the headset before your first connection. The Stealth 600 comes partially charged, but a full charge takes about three hours using the included USB cable. A low battery can prevent pairing, so if connection fails on the first try, charge for at least 30 minutes and try again.

Step-by-step connection instructions

Step 1: Insert the USB dongle. Locate any USB port on the front or back of your Xbox console. Push the dongle straight in until it clicks. You should see a small light on the dongle turn on or blink.

Step 2: Power on the headset. Press and hold the power button on the left ear cup for three seconds. You will hear a startup sound, and the LED light on the headset will turn on. Wait five seconds — the headset is searching for the dongle.

Step 3: Wait for the pairing light. Look at the LED on the headset. If it blinks rapidly (about once per second), the headset is pairing. If it stays solid, pairing is complete. This usually happens within 10 seconds of powering on. You do not need to press any buttons on the console.

Step 4: Test the connection. Launch any game or app that uses audio. You should hear sound through the headset. Speak into the microphone — you should see the mute indicator light respond. If you hear nothing, move to the troubleshooting section below.

Adjusting volume and chat settings on the headset

The Stealth 600 has physical buttons and dials on the ear cups to control audio without opening menus. The left ear cup has a dial for game volume and a separate dial for chat volume. Rotate each dial up to increase volume or down to decrease it. These settings stay in memory, so your preferred levels remain set the next time you connect.

The mute button is on the left ear cup. Press it once to mute the microphone — the LED will turn red. Press again to unmute. If you are in a party and other players cannot hear you, check that the mute button is not active.

You can also adjust audio settings through your Xbox console. Go to Settings > General > Volume & audio output to change system-wide audio levels, but the headset's physical dials override these settings for game and chat audio specifically.

What to do if the headset does not pair

If you plug in the dongle and power on the headset but hear no sound and see no pairing light, try this sequence: unplug the dongle from the Xbox, power off the headset completely, wait 10 seconds, then plug the dongle back in. Power on the headset again and wait 30 seconds. This clears any connection state that may be stuck.

If pairing still fails, check the battery. Plug the headset into a USB power source using the included cable and let it charge for at least 30 minutes. A completely dead battery can prevent pairing even if the headset appears to power on. After charging, unplug the headset, wait five seconds, power it on again, and try pairing.

If the dongle itself is not working, try a different USB port on your console. Some ports may be damaged or reserved for specific devices. If the headset pairs in one port but not another, use the working port going forward.

If none of these steps work, the dongle or headset may be defective. Contact Turtle Beach support with your purchase receipt — they can send a replacement dongle or arrange a warranty repair depending on how old the headset is.

Using the headset with multiple Xbox consoles

The Stealth 600 can pair with only one console at a time. If you own multiple Xbox consoles and want to use the same headset on both, you will need to unpair it from the first console before pairing it with the second. To unpair, straightforward unplug the dongle from the first console, plug it into the second console, and power on the headset.

The headset does not automatically switch between consoles if both are powered on in the same room. It will stay connected to whichever console it paired with first. If you want to switch, unplug the dongle, plug it into the other console, and power the headset off and back on.

Frequently Asked Questions

Can I use the Stealth 600 on PC or PlayStation?

No. The Stealth 600 is designed only for Xbox consoles. The proprietary wireless dongle does not work with PC, PlayStation, or Nintendo Switch. Turtle Beach makes separate headset models for those platforms.

What if I lost the USB dongle?

You will need to purchase a replacement dongle from Turtle Beach or an authorized retailer. The headset itself cannot function without it. Replacement dongles are available online but cost money and take several days to arrive. In the meantime, the headset cannot connect to your Xbox.

Does the Stealth 600 work with Xbox Game Pass or Xbox Cloud Gaming?

Yes. As long as the headset is connected to your Xbox console, it works with any game or app running on that console, including Game Pass titles and cloud gaming through the Xbox app.

Why does my headset keep disconnecting?

Interference from other wireless devices (routers, microwaves, cordless phones) can cause drops. Try moving your console or the dongle away from other electronics. If disconnections happen in the same spot every time, the dongle may be damaged — try a different USB port first, then contact Turtle Beach if the problem continues.

Can I charge the headset while using it?

Yes. The Stealth 600 can be charged via USB cable while connected and in use. Plug the cable into any USB power source (a wall adapter, your console, or a computer) and the headset will charge without disconnecting from your Xbox.