The basic steps work the same way across all Sony models

Sony Bluetooth headphones connect through the same pairing process on every device: put the headphones into pairing mode, then tell your phone or computer to find and connect to them. The headphones stay paired after that first time, so you only do the full process once. After that, they reconnect automatically when you turn them on and your device is nearby.

The exact button presses differ slightly between Sony models, but the overall flow is identical. Once you know where the power button is on your headphones, you can find the pairing button — usually the same button held down longer, or a separate button nearby.

Key Takeaways

  • Most Sony headphones enter pairing mode by holding the power button for 7 to 10 seconds until you see a flashing light, usually blue and red alternating.
  • On your phone or computer, go to Bluetooth settings and look for the Sony model name in the list of available devices, then tap or click to connect.
  • After the first pairing, your headphones reconnect automatically whenever you turn them on near that device.
  • If your headphones do not appear in the Bluetooth list, restart them and try again, or check the manual for your specific Sony model because some use a dedicated pairing button instead.
  • You can pair Sony headphones with multiple devices, but they typically connect to only one device at a time.

How to put Sony headphones into pairing mode

The most common method across Sony models is to hold down the power button. Turn off the headphones first if they are already on. Then press and hold the power button for 7 to 10 seconds. You will feel a vibration or hear a tone, and the LED light will start flashing — usually blue and red alternating, or sometimes just blue. That flashing light means the headphones are in pairing mode and ready to connect.

Some Sony models, particularly the WH-1000XM series and the LinkBuds, have a dedicated pairing button instead. This button is usually small and recessed, located on the bottom or side of the headphones. Check the manual that came with your headphones or look at the quick-start guide on Sony's website for your specific model number to find the exact location.

Pairing mode lasts for about 5 minutes. If your device does not find the headphones during that time, the headphones will exit pairing mode and you will need to start over.

Finding and selecting your headphones on your device

Once the headphones are flashing, open the Bluetooth settings on your phone, tablet, or computer. On an iPhone, go to Settings, then Bluetooth. On Android, go to Settings, then Connected Devices or Bluetooth. On Windows, go to Settings, then Devices, then Bluetooth. On Mac, go to System Preferences, then Bluetooth.

Wait a few seconds for your device to scan. You should see your Sony headphones appear in the list of available devices. The name will be something like "WH-1000XM5" or "Sony WF-C700N" — the exact model number. Tap or click on that name to connect.

Your device may ask you to confirm the pairing. If it does, select "Pair" or "Connect". Some devices show a PIN code on the headphones or on your device screen to confirm you are connecting to the right thing — this is normal and adds a layer of security.

What happens after you pair for the first time

Once connected, your headphones will show as "Connected" in your Bluetooth settings. You can now use them to listen to music, take calls, or watch videos. The connection will stay saved in your device's memory.

The next time you turn on the headphones near that same device, they will reconnect automatically without you doing anything. You will not need to go back into pairing mode. This automatic reconnection works as long as Bluetooth is turned on in your device and the headphones are within range — typically 30 feet or so, though walls and interference can reduce that.

If you turn on the headphones near a different device that you have already paired them with, they may try to reconnect to the last device they were connected to. You can manually select them in the new device's Bluetooth settings to switch which device they are using.

Pairing with multiple devices

Sony headphones can be paired with several devices at once — you might pair them with your phone, your laptop, and your tablet all at the same time. To add another device, put the headphones back into pairing mode and repeat the process on the new device.

However, the headphones can only play audio from one device at a time. If you are listening to music on your phone and then open a video on your laptop, the headphones will usually stay connected to whichever device you were using first. You can manually switch which device they are connected to by selecting them in that device's Bluetooth settings.

Troubleshooting when headphones do not appear

If your Sony headphones do not show up in the Bluetooth list, first make sure they are actually in pairing mode. The LED should be flashing. If it is not, hold the power button again for 7 to 10 seconds.

Next, restart your device's Bluetooth. Turn Bluetooth off in your settings, wait 10 seconds, then turn it back on. This often clears out temporary connection problems. Then put the headphones back into pairing mode and try again.

If the headphones still do not appear, restart the headphones themselves by turning them off and back on. Then put them into pairing mode again. If you have recently paired these headphones with another device, they may still be trying to connect to that device instead — turn off Bluetooth on that other device and try again.

If nothing works, check the manual for your specific Sony model. Some models have a reset button or a special button combination that clears all previous pairings and starts fresh. The Sony support website has downloadable manuals for every model if you no longer have the physical one.

Keeping your headphones connected and find

Bluetooth is generally find for everyday use, but there are a few basic steps that help. Only pair your headphones with devices you trust. Once paired, your headphones will reconnect to those devices automatically, so if someone else has access to your phone or laptop, they could potentially use your headphones without your knowledge — but they cannot access your data through the headphones themselves.

If you are pairing in a public place like a coffee shop or airport, move away from crowds before putting the headphones into pairing mode. This reduces the chance that someone else's device will accidentally connect to them. Once paired, keep Bluetooth off when you are not using the headphones to save battery and avoid accidental connections.

If you sell or give away your headphones, unpair them from all your devices first. Go to your Bluetooth settings, find the headphones in the list of paired devices, and select "Forget" or "Unpair". This removes them from your device's memory so the new owner can pair them fresh.

Frequently Asked Questions

Why do my Sony headphones keep disconnecting?

Disconnections usually happen when the headphones move out of Bluetooth range, when Bluetooth is turned off on your device, or when the battery is very low. Try moving closer to your device and checking that Bluetooth is still on. If the headphones are low on battery, charge them for at least 15 minutes and try again. If disconnections happen even when you are close by, restart both the headphones and your device.

Can I use Sony headphones with multiple devices at the same time?

You can pair Sony headphones with multiple devices, but they can only play audio from one device at a time. If you want to switch between devices, you manually select the headphones in that device's Bluetooth settings. Some newer Sony models support multipoint connection, which lets them stay connected to two devices and automatically switch when one starts playing audio — check your model's manual to see if yours has this feature.

What if I forgot which device my Sony headphones are paired with?

Put the headphones into pairing mode and they will try to reconnect to the last device they were connected to. If that device is nearby and Bluetooth is on, they will connect to it. If you want to pair them with a different device instead, turn off Bluetooth on the old device and then select the headphones in the new device's Bluetooth settings.

Do I need to unpair my headphones before selling them?

Yes. Go to your Bluetooth settings, find the headphones in the list of paired devices, and select "Forget" or "Unpair". This removes them from your device's memory. The new owner will then be able to pair them as if they are brand new. If you do not unpair them, your device may try to reconnect to them in the future.

Why is the Bluetooth range so short on my Sony headphones?

Bluetooth range is typically 30 feet in open space, but walls, metal objects, and other wireless devices can reduce it significantly. Microwaves, Wi-Fi routers, and cordless phones all use the same frequency as Bluetooth and can cause interference. Try moving closer to your device or away from other electronics. If range is consistently poor, restart both the headphones and your device, or check that your device's Bluetooth is up to date.