Connect Sonos Roam to WiFi in three steps

The Sonos Roam connects to your home WiFi network through the Sonos app on your phone. read the Sonos app (available on iOS and Android), open it, and tap the plus icon to add a new device. Select Sonos Roam from the list, hold the speaker near your phone, and follow the on-screen prompts to choose your WiFi network and enter your password. The speaker will connect within a minute and show a white light when ready.

If your Roam does not appear in the app, make sure the speaker is powered on and within 10 feet of your phone. Press and hold the power button on the back of the speaker for three seconds — you should hear a chime. Then try adding the device again in the app.

Once connected to WiFi, your Roam can play music from Spotify, Apple Music, Amazon Music, and other streaming services through the Sonos app. You can also use voice commands if you have Alexa or Google Assistant enabled in the app settings.

Key Takeaways

  • read the Sonos app on your phone, tap the plus icon, and select Sonos Roam to connect to your home WiFi network.
  • The speaker must be powered on and within 10 feet of your phone during setup, and you will need your WiFi password.
  • Bluetooth pairing happens automatically when you hold the Roam near your phone during WiFi setup, but you can also pair it manually by pressing the Bluetooth button on the speaker.
  • If the speaker does not appear in the app, press and hold the power button for three seconds to reset the connection and try again.

Pair Sonos Roam to your phone or tablet using Bluetooth

Bluetooth pairing happens during the WiFi setup process, but you can also pair the Roam to a different device manually. Press the Bluetooth button on the back of the speaker — it is the circular button below the power button. The speaker will emit a tone and the Bluetooth light will blink white, meaning it is ready to pair.

On your phone or tablet, go to Settings, find Bluetooth, and turn it on. Look for "Sonos Roam" in the list of available devices and tap it. Your device will connect within a few seconds. Once paired, the speaker will automatically connect to that device whenever Bluetooth is turned on and the speaker is nearby.

You can pair the Roam to multiple devices, but it will only play audio from one at a time. If you want to switch which device is playing, straightforward start playing music on a different phone or tablet and the Roam will switch to that source.

Switch between WiFi and Bluetooth playback

The Sonos Roam can play music over WiFi or Bluetooth, but not both at the same time. When connected to WiFi through the Sonos app, the speaker prioritizes that connection. If you want to use Bluetooth instead, press the Bluetooth button on the back of the speaker to switch modes. The Bluetooth light will turn solid white when active.

To return to WiFi playback, press the Bluetooth button again or straightforward start playing music through the Sonos app on your phone. The speaker will automatically switch back to WiFi mode. This flexibility means you can use the Roam in your home on WiFi for better sound quality and range, then switch to Bluetooth when you take it outside or to another location.

Troubleshoot connection problems

If the Roam will not connect to WiFi, first check that your router is working and your phone is connected to the same network. Move the speaker closer to the router — thick walls and distance can block the signal. Restart the Roam by pressing and holding the power button for five seconds until you hear two chimes, then wait 10 seconds and power it back on.

If the speaker still will not connect, forget it from the Sonos app and try adding it again. Open the app, go to Settings, select your Roam, and choose Remove. Then tap the plus icon and add the device as if it were new. This clears any stored connection information that might be causing the problem.

For Bluetooth pairing issues, make sure Bluetooth is turned on in your phone's settings and that no other device is currently connected to the Roam. Press the Bluetooth button on the speaker for five seconds to reset the Bluetooth connection, then pair your phone again through your device's Bluetooth settings.

Use the Sonos app to control playback and volume

Once your Roam is connected to WiFi, open the Sonos app and you will see the speaker listed at the top of the screen. Tap it to open the playback controls. You can adjust the volume with the slider, pause or play music, skip to the next track, and see what is currently playing. The app also shows the speaker's battery level in the top right corner.

To play a specific song, album, or playlist, open your music service in the Sonos app (such as Spotify or Apple Music), find what you want to listen to, and tap the speaker icon to choose the Roam as your playback device. The music will start playing on the speaker within a few seconds. You can also use the app to set a sleep timer or create a group with other Sonos speakers in your home.

Connect multiple Roam speakers together

If you have more than one Sonos Roam, you can group them together to play the same music in multiple rooms. Open the Sonos app, tap the speaker icon at the top, and select "Create Group." Choose which speakers you want to include, and they will all play the same audio in sync. You can adjust the volume for each speaker individually or for the whole group.

Grouped speakers must all be connected to the same WiFi network. If you take one speaker outside on Bluetooth, it will drop out of the group automatically. When you bring it back inside and reconnect to WiFi, you can add it back to the group through the app.

Frequently Asked Questions

Can I use Sonos Roam without WiFi?

Yes. Switch to Bluetooth mode by pressing the Bluetooth button on the back of the speaker, then pair it to your phone through your device's Bluetooth settings. You can play music from any app on your phone — Spotify, YouTube, podcasts, or anything else — without needing WiFi. Bluetooth range is typically 30 feet in open space.

Why does my Roam keep disconnecting from WiFi?

Move the speaker closer to your router or remove obstacles like thick walls between them. If disconnections continue, restart your router by unplugging it for 30 seconds, then power it back on. You can also try removing the Roam from the Sonos app and adding it again to refresh the connection.

How do I reset the Sonos Roam to factory settings?

Press and hold the power button on the back of the speaker for 10 seconds until you hear three chimes. The speaker will restart and return to factory settings, erasing all WiFi and Bluetooth pairings. You will need to set it up again through the Sonos app.

Can I control the Roam without the Sonos app?

When using Bluetooth, you can control playback through your phone's standard music controls — pause, play, and skip buttons work on any app. When connected to WiFi, you need the Sonos app to change what is playing or adjust volume. Some voice assistants like Alexa can also control the Roam if you enable that feature in the app.

What is the difference between WiFi and Bluetooth on the Roam?

WiFi gives you access to streaming services through the Sonos app and works from anywhere in your home, but requires a router. Bluetooth connects directly to your phone without a router and works anywhere, but has shorter range and uses more battery. WiFi generally sounds better because it does not compete with other wireless devices.