Samsung soundbars connect to subwoofers wirelessly through Bluetooth pairing, not through cables
Most Samsung soundbars ship with a matching subwoofer that pairs automatically when you power both on for the first time. If the subwoofer does not connect on its own, or if you are adding a subwoofer later, you will need to put the soundbar into pairing mode and then trigger pairing on the subwoofer. The whole process takes about five minutes and requires no cables between the two devices.
The exact steps depend on which Samsung soundbar model you own, because Samsung changed the pairing method between older and newer models. This guide covers both the current method (used on most soundbars made after 2019) and the older method, so you can find the one that matches your remote.
Key Takeaways
- Samsung soundbar subwoofers pair wirelessly through Bluetooth, not through a cable connection.
- Most subwoofers pair automatically when powered on together for the first time, but manual pairing takes about five minutes if they do not.
- Newer Samsung soundbars use the remote to enter pairing mode, while older models require you to hold a button on the soundbar itself.
- If pairing fails, power off both devices, wait 30 seconds, and try again — this fixes most connection problems.
- A subwoofer that pairs but produces no sound usually needs its volume turned up on the soundbar's settings menu.
Automatic pairing when you first power on both devices
When you unbox a new Samsung soundbar and subwoofer together, they are designed to find each other automatically. Place the subwoofer in the room where you want it — usually behind the couch or to the side of your TV — and plug in the power cable. Then power on the soundbar. Within 30 to 60 seconds, the subwoofer should emit a single beep or flash a light to show it has connected.
Check the soundbar's display or app to confirm the subwoofer is listed as connected. If you own a newer Samsung model, open the SmartThings app on your phone, tap the soundbar, and look for the subwoofer in the device list. If you see it there, pairing is complete and you can skip to the section on adjusting subwoofer volume.
If the subwoofer does not connect within two minutes, power off both devices, wait 30 seconds, and power them back on in the same order: subwoofer first, then soundbar. This resets the pairing process and solves the problem in most cases.
Manual pairing on newer Samsung soundbars (2019 and later)
If automatic pairing did not work, you will need to manually trigger pairing mode. On newer Samsung soundbars, this is done through the remote control. Press the Home button on your remote to open the soundbar menu, then navigate to Sound or Audio settings. Look for an option labeled Subwoofer, Add Subwoofer, or Pairing Mode.
Select that option and the soundbar will enter pairing mode for about two minutes. You will see a message on the soundbar's display or on your TV screen saying it is ready to pair. Now press and hold the pairing button on the back of the subwoofer for three to five seconds until you hear a beep or see a light flash. The subwoofer should connect within 30 seconds.
If the menu option does not appear on your soundbar, try this alternative: press the Source or Input button on the remote repeatedly until you cycle through to a pairing or setup screen. Some Samsung models show pairing options there instead of in the settings menu.
Manual pairing on older Samsung soundbars (before 2019)
Older Samsung soundbars do not have a pairing option in the remote menu. Instead, you will use a button on the soundbar itself. Locate the small button on the back or bottom of the soundbar labeled Pairing, ID Set, or sometimes just a symbol that looks like two connected dots. Press and hold this button for three to five seconds until the soundbar's light blinks or you hear a tone.
The soundbar is now in pairing mode for about two minutes. when ready press and hold the pairing button on the back of the subwoofer for three to five seconds. You should hear a beep from the subwoofer and see its light change color or stop blinking, which means pairing succeeded.
If you cannot find a pairing button on your soundbar, check the manual that came with it or search online for your specific model number. The manual will show you exactly where the button is located and what it looks like.
What to do if the subwoofer pairs but produces no sound
A subwoofer that connects successfully but remains silent usually has its volume set to zero in the soundbar's settings. Open the soundbar menu on your remote and find the Sound or Audio settings. Look for Subwoofer Volume or Subwoofer Level and increase it to at least 50 percent. Test by playing music or a movie — you should hear bass from the subwoofer now.
If the subwoofer still produces no sound, check that it is powered on. The subwoofer should have a power light on the back or bottom that glows when plugged in. If the light is off, make sure the power cable is fully inserted into both the wall outlet and the subwoofer.
As a last step, power off both the soundbar and subwoofer, wait 30 seconds, and power them back on. This resets the connection and often restores sound if something went wrong during pairing.
Troubleshooting a subwoofer that will not pair at all
If the subwoofer does not beep or flash when you try to pair it, first confirm that it is powered on. Look for a power light on the back of the subwoofer — if you do not see one, the power cable may be loose or the outlet may be dead. Try plugging the subwoofer into a different outlet to rule out a bad wall socket.
Next, check that you are holding the pairing button long enough. Many people release it after one or two seconds, but most Samsung subwoofers require three to five seconds of continuous pressure. Count slowly to five while holding the button and watch for a light change or beep.
If the subwoofer still will not pair, try moving it closer to the soundbar — within six feet — and repeat the pairing process. Bluetooth range can be blocked by walls or metal objects, and moving the subwoofer temporarily can help establish the initial connection. Once paired, you can move it back to its original location.
If none of these steps work, the subwoofer or soundbar may have a hardware problem. Contact Samsung support with your model numbers and describe what happens when you try to pair — they can tell you whether the devices need repair or replacement.
Adjusting subwoofer volume and bass level after pairing
Once the subwoofer is paired and producing sound, you can fine-tune how much bass you hear. In the soundbar's Sound or Audio settings, you will usually find two controls: Subwoofer Volume (how loud the subwoofer is overall) and sometimes Bass or Low Frequency Effect (how much bass is mixed into the overall sound).
Start with the subwoofer volume at 50 to 60 percent and play a song or movie scene with noticeable bass. If you want more bass, increase the volume in five-percent increments until it sounds right to you. If the bass sounds overwhelming or muddy, lower it instead. There is no single correct setting — it depends on your room size, how far you sit from the subwoofer, and your personal preference.
Some Samsung soundbars also let you adjust bass through the SmartThings app on your phone, which can be more convenient than using the remote menu every time you want to change it.
Frequently Asked Questions
Can I use a non-Samsung subwoofer with my Samsung soundbar?
Most Samsung soundbars are designed to pair only with Samsung subwoofers. Non-Samsung subwoofers may not pair through Bluetooth, and even if they do, the soundbar may not recognize them or let you adjust the volume. If you want to use a different brand, check the soundbar manual first to see if it supports third-party subwoofers.
Why does my subwoofer keep disconnecting?
Subwoofers that disconnect and reconnect repeatedly usually have a weak Bluetooth signal. Move the subwoofer closer to the soundbar, remove any metal objects between them, and make sure the subwoofer is not sitting directly on the floor against a wall — these positions can block the signal. If disconnections continue, the subwoofer may need a firmware update through the SmartThings app.
Do I need to pair the subwoofer every time I turn on my soundbar?
No. Once paired, the subwoofer and soundbar remember each other. They will reconnect automatically every time you power them on, as long as they are within Bluetooth range of each other. You only need to pair them once, or again if you reset the soundbar to factory settings.
What if I want to pair a second subwoofer to my soundbar?
Most Samsung soundbars support only one subwoofer at a time. If you want to add a second subwoofer, check your soundbar manual to see if it has a multi-subwoofer mode. If it does not, you would need to use a different audio setup, such as a Samsung surround sound system that includes multiple subwoofers.
How far away can the subwoofer be from the soundbar?
Bluetooth typically works reliably up to about 30 feet in an open room, but walls and metal objects reduce that range. For the most stable connection, keep the subwoofer within 20 feet of the soundbar and avoid placing it in a completely separate room. If you need the subwoofer farther away, test the connection after moving it to make sure it stays paired.