The three ways to connect a speaker to your TV

Most TVs have built-in speakers, but they are often thin and tinny. Adding an external speaker improves sound quality and volume. You have three main routes: HDMI (the cable that carries both picture and sound), optical audio (a thin cable that carries sound only), or Bluetooth (wireless connection). Which one works depends on what ports your TV and speaker both have, and whether you want to run a cable or go wireless.

HDMI is the simplest if your speaker has an HDMI input — you plug one cable in and both picture and sound travel together. Optical audio works on older TVs and speakers that do not have HDMI. Bluetooth is the cleanest looking but can have slight delays and occasional dropouts, so it works best for casual watching rather than gaming or movies where sound timing matters.

Key Takeaways

  • HDMI is the fastest route if both your TV and speaker have HDMI ports — one cable carries picture and sound together.
  • Optical audio (also called TOSLINK) works on TVs and speakers without HDMI and requires a thin square-ended cable you can buy for under $10.
  • Bluetooth is wireless but introduces a slight delay, so it works better for everyday TV than for gaming or movies where sound timing matters.
  • Check the back and sides of your TV first to see which ports it actually has — many TVs have optical but not HDMI audio output.
  • If your speaker has no audio input at all, you may need to buy a separate amplifier or powered speaker instead of trying to force a connection.

Connecting via HDMI

HDMI is the easiest route if your speaker has an HDMI input port. Look at the back of your TV for an HDMI port labeled "HDMI Out" or "HDMI ARC" (ARC stands for Audio Return Channel). Plug one end of an HDMI cable into that port and the other end into the HDMI input on your speaker. Turn on both devices. The TV should automatically send sound to the speaker.

If the TV does not send sound through HDMI right away, go into your TV's settings menu (usually under Audio or Sound), find the output option, and select HDMI. Some TVs call this "HDMI ARC" or "eARC" — these are the same thing for your purpose. Once you set it, the TV remembers it and sends sound there every time you turn on the speaker.

One catch: not all HDMI ports on a TV can send sound out. Only the port labeled ARC or eARC can do that. If your TV has multiple HDMI ports, use the one marked ARC. If your TV has no ARC port at all, you will need to use optical audio instead.

Connecting via optical audio cable

Optical audio (also called TOSLINK or digital audio) is the second-most common route. Look at the back of your TV for a small square port labeled "Optical Out," "Digital Audio Out," or "TOSLINK." Plug one end of an optical audio cable into that port. Plug the other end into the optical input on your speaker. Turn on both devices.

Optical cables are cheap — you can buy one for $5 to $15 at any electronics store or online. They are also durable and do not wear out. The connection is digital, so the sound quality is the same as HDMI. The main difference is that optical carries sound only, not picture.

If your TV has no optical port, check whether it has a 3.5mm headphone jack (the small round port). Some older TVs use this instead. You can plug a 3.5mm to optical adapter into the headphone jack, but this is less common and less reliable than a true optical port.

Connecting via Bluetooth

Bluetooth is wireless, so you do not need a cable. Not all TVs have Bluetooth, so check your TV's settings first. Go to Settings, then Sound or Audio, and look for a Bluetooth option. If it exists, turn Bluetooth on. Your TV will search for nearby Bluetooth devices.

On your speaker, press and hold the Bluetooth button (usually on the back or bottom) until a light blinks. This puts the speaker in pairing mode. Your TV should find it and ask you to confirm the connection. Select the speaker name and confirm. Once paired, the TV will connect to that speaker automatically when you turn both on.

Bluetooth has one drawback: there is usually a delay of 100 to 300 milliseconds between when sound should play and when it actually does. This is barely noticeable for regular TV shows and news, but it becomes obvious during movies or games where you can see lips moving before you hear words. If timing matters, use HDMI or optical instead.

What to do if your TV has no audio output port

Some newer TVs have removed optical ports and do not have HDMI ARC. If your TV has neither optical nor HDMI ARC, your options narrow. Check whether your TV has Bluetooth — if it does, use that. If it does not, you will need a separate device.

One solution is a digital audio converter, a small box that takes the headphone jack output from your TV and converts it to optical or HDMI. These cost $20 to $40 and sit between your TV and speaker. Plug the TV's headphone jack into the converter, then plug the converter into your speaker's optical or HDMI input.

Another solution is to run sound through your cable box or streaming device instead of the TV itself. If you use a Roku, Apple TV, Fire Stick, or similar device, connect that device directly to your speaker via HDMI or optical. Then connect the device to your TV with a separate HDMI cable for picture only. This way the speaker gets sound from the device, not the TV.

Checking your TV and speaker ports before you buy

Before you buy a cable or converter, spend five minutes looking at what ports you actually have. Turn off your TV and look at the back and sides. Write down every port you see — HDMI, optical, headphone jack, USB, ethernet. Do the same for your speaker. Take a photo if you are not sure what you are looking at.

Then match them up. If both have HDMI, use HDMI. If one has optical and the other does not, you need a cable or converter. If only the TV has a headphone jack, you need a converter. This five-minute check saves you from buying the wrong cable and having to return it.

If you are buying a new speaker and your TV has limited ports, look for a speaker that has multiple input options — HDMI, optical, and Bluetooth all in one. This gives you flexibility if you ever change your TV or add other devices.

Troubleshooting when sound does not come through

If you have plugged everything in and still hear sound from the TV's built-in speakers instead of your external speaker, the TV is not sending sound to the right place. Go into your TV's settings menu and look for Audio, Sound, or Speaker settings. Find the option that says "Output" or "Speaker" and change it from "Internal" or "TV Speaker" to the name of your connection — "HDMI," "Optical," or "Bluetooth."

If you still hear nothing, check that the speaker is turned on and that the volume is not muted or set to zero. Some speakers have a separate volume knob on the back. Check that too. If the speaker has a power light, it should be on. If it is not, the speaker may not be getting power.

If you are using Bluetooth and the connection keeps dropping, move the speaker closer to the TV. Bluetooth has a range of about 30 feet, but walls and other devices can interfere. If moving it does not help, try unpairing and pairing again — go into your TV's Bluetooth settings, find the speaker, and select "Forget" or "Remove," then pair it fresh.

Frequently Asked Questions

Can I use both the TV speakers and an external speaker at the same time?

Most TVs will not do this — once you set the output to an external speaker, the TV speakers turn off. Some TVs have an option to turn both on, but it is rare. If you want sound from multiple rooms, you need a speaker system with multiple zones or multiple separate speakers, each with its own input.

Do I need a powered speaker or will any speaker work?

You need a powered speaker — one with a built-in amplifier and its own power cord. A passive speaker (one without power) will not work unless you also buy a separate amplifier. When shopping, look for the words "powered," "active," or "amplified" in the product name.

What if my speaker only has a 3.5mm headphone jack input?

You can use it, but you will need a converter. Buy a cable that goes from optical to 3.5mm, or from HDMI to 3.5mm, depending on what your TV has. These cost $10 to $20. The sound quality will be slightly lower than with optical or HDMI, but it will work.

Will a soundbar work the same way as a regular speaker?

Yes. Soundbars are just long, flat speakers. They connect the same way — HDMI, optical, or Bluetooth. Most soundbars are powered, so they have their own amplifier and power cord. Connect them exactly as you would a regular speaker.

Can I connect a speaker to my TV if the speaker is in another room?

Not directly. Bluetooth has a range of about 30 feet through walls, but it is unreliable at that distance. If you want sound in another room, you need either a wireless multi-room system (like Sonos or a similar brand) or to run a cable through the walls. These are separate products from a basic speaker connection.