What an aux connection does and when to use it
An aux cord (short for auxiliary) is a thin cable with a 3.5mm jack on each end — the same size plug that used to come with earbuds. When you plug one end into your phone, tablet, or computer and the other into a speaker, audio plays through the speaker instead of the device's built-in speakers. This is the simplest way to add volume to any device that has a headphone jack or aux output.
Aux connections work with almost any device made in the last fifteen years. Unlike Bluetooth, which requires pairing and can drop connection, an aux cord works the moment you plug it in. The trade-off is that you have a physical cable, so the speaker has to stay within a few feet of your device.
You'll use an aux cord when your speaker doesn't have Bluetooth, when Bluetooth isn't working, or when you want a connection that won't drain your device's battery. Many older speakers, car stereos, and portable radios still use aux as their only input option.
Key Takeaways
- Aux cords have a 3.5mm jack on both ends and plug directly into the headphone jack of your device and the aux input of your speaker.
- Check your device for a headphone jack or aux output port before buying a cord — newer phones may not have one.
- If your device has no headphone jack, you'll need an adapter that converts USB-C or Lightning to 3.5mm aux.
- Once plugged in, lower the volume on both your device and speaker, then raise them gradually to avoid sudden loud noise.
- If you hear no sound, check that the cord is fully inserted, that your device isn't set to Bluetooth output, and that the speaker is powered on.
Finding the aux input on your speaker
Most speakers have the aux input on the back or bottom, though some portable speakers put it on the side. Look for a port labeled "Aux In", "Line In", or "3.5mm". It's usually a small round hole about the size of a pencil tip. Some speakers have multiple inputs — you might see aux next to USB, Bluetooth, or RCA connectors — so make sure you're using the right one.
If your speaker has no visible aux port, check the manual or the manufacturer's website. Some compact speakers only have Bluetooth and USB charging, which means they won't work with an aux cord. Older speakers sometimes have RCA inputs (two round ports, usually red and white) instead of aux — those require a different type of cable.
Once you've located the aux input, make sure the speaker is powered on before you plug anything in. This isn't strictly necessary, but it lets you hear the connection work when ready and confirms the speaker is functioning.
Checking your device for a headphone jack
Your phone, tablet, or computer needs a way to output audio to the aux cord. Most devices have a 3.5mm headphone jack — a small round port where earbuds used to plug in. On phones, it's usually on the bottom edge or top edge. On laptops and tablets, check the sides or back.
Many newer phones, especially recent iPhones and high-end Android models, no longer include a headphone jack. If your device has no jack, you have two options: use a USB-C to 3.5mm adapter (for Android phones) or a Lightning to 3.5mm adapter (for iPhones). These adapters are inexpensive and widely available. Plug the adapter into your device's charging port, then plug the aux cord into the adapter's 3.5mm jack.
If you're using a computer, check whether it has a headphone jack or a combined audio jack. Some laptops have only USB-C or Thunderbolt ports, in which case you'll need a USB audio adapter instead of a straightforward 3.5mm adapter.
Plugging in the aux cord and setting volume
Before you plug in the cord, lower the volume on both your device and your speaker. This prevents a sudden loud burst of sound that can damage the speaker or your hearing. On your device, use the volume buttons or settings to turn the volume down to 25 percent or lower. On the speaker, turn the volume knob or dial all the way down.
Now plug the aux cord into your device's headphone jack or adapter. You should hear a small click as it seats fully. Then plug the other end into the speaker's aux input port. Again, push it in until you feel it click — a loose connection will produce crackling or no sound at all.
Once both ends are plugged in, slowly turn up the volume on your speaker first, then on your device. Start at a low level and increase until the sound is comfortable. This two-step approach gives you control and prevents accidental damage. If you need to unplug the cord later, do so gently — don't yank it or twist it while pulling.
What to do if you hear no sound
If you plug in the cord and hear nothing, start with the simplest checks. Make sure both the device and speaker are powered on. Check that the volume on both is actually turned up — it's straightforward to forget one or the other. Then unplug the cord and look at both jacks to make sure neither is bent, corroded, or filled with lint. A bent pin inside the jack will prevent a good connection.
Next, check your device's audio output. On phones and tablets, swipe down to see the quick settings and look for an audio or sound option. Make sure it's not set to Bluetooth or another output. On computers, right-click the volume icon in the system tray (Windows) or click the volume icon in the menu bar (Mac) and confirm the headphone jack is selected as the output device.
If the cord itself is the problem, try a different aux cable if you have one. Aux cords are cheap and fail often — a frayed or broken internal wire won't show from the outside. If a different cord works, replace the original one. If no cord works, the jack on your device or speaker may be damaged and may need professional repair.
Aux cords versus Bluetooth and other options
An aux cord is reliable and works when ready, but it ties you to one location. Bluetooth lets you move around freely, but it requires pairing, can drop connection, and drains your device's battery. USB connections (on some speakers) provide power and audio at the same time, which is useful if your device's battery is low. RCA cables (older red and white connectors) are bulkier but common on home stereos and amplifiers.
Choose aux when your speaker has it and your device has a headphone jack. Choose Bluetooth when you want to move around or your device has no jack and you don't want to carry an adapter. If your speaker has multiple input options, aux is usually the most straightforward — there's no pairing to set up and no battery drain.
Caring for your aux cord and jack
Aux cords are durable but can fray or break if bent repeatedly at sharp angles. Store the cord loosely coiled, not wrapped tightly around your device. When you unplug it, hold the connector itself, not the cable, and pull straight out — twisting or pulling at an angle stresses the internal wires.
Keep both the cord and the jacks clean. Dust and lint inside a jack reduce sound quality and can prevent a good connection. Use a dry cotton swab to gently clean the inside of a jack, or blow compressed air through it. Never use water or liquid cleaners on electronics.
If your aux cord stops working, don't assume the jack is broken — the cord itself fails much more often. Buy a replacement cord first and test it. Aux cables cost between two and eight dollars, so it's worth trying a new one before paying for repairs.
Frequently Asked Questions
Can I use an aux cord with a Bluetooth speaker?
Yes. Most Bluetooth speakers have an aux input as a backup. Plug in the cord and the speaker will automatically switch from Bluetooth to aux input. You can usually switch back to Bluetooth by unplugging the cord or using a button on the speaker.
What if my speaker has RCA inputs instead of aux?
RCA inputs are two separate round ports (red and white). You'll need an RCA cable, not an aux cord. These are different connectors. Some electronics stores sell adapters that convert aux to RCA, but a dedicated RCA cable is simpler and cheaper.
Does the length of the aux cord matter?
Longer cords (10 feet or more) can pick up electrical interference and produce a slight hum or buzz, but this is rare with modern shielded cables. For most uses, any length works fine. Choose based on the distance between your device and speaker.
Can I use an aux cord with my car stereo?
Yes, if your car stereo has an aux input. Plug one end into your phone and the other into the aux port on the stereo. Some older car stereos only have CD or radio, so check your manual to see what inputs are available.
Why does my aux connection make a crackling sound?
Crackling usually means a loose connection. Unplug the cord, inspect both jacks for damage or debris, and plug it back in firmly. If the crackling continues with a different cord, the jack itself may be damaged and need cleaning or repair.