The basic connection process for Soundcore earbuds

Soundcore earbuds connect through Bluetooth, the same wireless standard your phone uses for other devices. The first time you pair them, you'll turn on the earbuds, hold the button until the light flashes (usually 3 to 5 seconds), then select them from your phone's Bluetooth menu. After that first pairing, the earbuds will reconnect automatically when you turn them on and your phone's Bluetooth is active.

The exact button location and hold time varies slightly by model — some Soundcore earbuds use a touch control on the earbud itself, while others have a button on the charging case. Check the manual that came with your specific model, or look up your model number on Soundcore's website to find the exact steps. The model number is usually printed inside the charging case.

Once paired, your phone remembers the connection. You don't need to pair them again unless you want to connect them to a different device, or unless you reset the earbuds to factory settings.

Key Takeaways

  • Turn on your Soundcore earbuds and hold the pairing button until the light flashes, then select them from your phone's Bluetooth settings.
  • The pairing button location and hold time depend on your specific Soundcore model, so check your manual or the Soundcore website for exact instructions.
  • After the first pairing, your earbuds will reconnect automatically whenever you turn them on and your phone's Bluetooth is enabled.
  • If your earbuds won't connect, restart both the earbuds and your phone, then try pairing again from the Bluetooth menu.
  • You can pair Soundcore earbuds to multiple devices, but they will only connect to one device at a time.

Finding the pairing button on your Soundcore model

Most Soundcore earbuds have a button on the charging case rather than on the earbud itself. Look for a small indented button, usually on the back or side of the case. Press and hold this button for 3 to 5 seconds until you see the LED light on the case flash blue and white alternately — this means the earbuds are in pairing mode and ready to connect.

Some newer Soundcore models, like the Space A40 or the Liberty 4, use touch controls on the earbud itself instead. If your earbuds have touch controls, hold your finger on the touch area of one earbud for about 3 seconds until the light flashes. The manual will specify which earbud (left or right) to touch.

If you can't find a button or don't see a flashing light after holding for several seconds, your earbuds may already be in pairing mode, or the battery may be too low. Charge the case for at least 15 minutes and try again.

Connecting to an Android phone

On Android, open Settings and tap Connected devices or Bluetooth (the exact name varies by phone maker). Make sure Bluetooth is turned on. Put your Soundcore earbuds in pairing mode by holding the button on the case until the light flashes. Your phone should show the earbuds' name in the list of available devices — usually something like "Soundcore Space A40" or "Soundcore Liberty 4".

Tap the name to connect. Your phone will show "Connecting" for a few seconds, then "Connected" once the pairing is complete. You should hear a tone in the earbuds or see a confirmation message on your phone. If the connection fails, go back to the Bluetooth menu and try again — sometimes the earbuds need a second attempt.

After the first connection, the earbuds will appear in your Bluetooth list as a saved device. The next time you turn them on, they'll reconnect automatically without needing to pair again.

Connecting to an iPhone or iPad

On iPhone or iPad, open Settings and tap Bluetooth. Make sure Bluetooth is on. Put your Soundcore earbuds in pairing mode by holding the button on the case until the light flashes blue and white. The earbuds will appear in the "Other Devices" section of your Bluetooth menu — tap the name to pair.

Your phone will show "Connecting" briefly, then move the earbuds to the "My Devices" section once they're paired. You may see a popup asking to connect to iCloud or use Siri — you can tap "Not Now" or follow the prompts, depending on what you want. Either way, the earbuds will work for audio once the pairing is complete.

If you have multiple Apple devices (iPhone, iPad, Mac), you can pair the earbuds to all of them. They'll connect to whichever device you're actively using, though you may need to manually switch them in Bluetooth settings if two devices are on at the same time.

Connecting to a Windows or Mac computer

On Windows, open Settings, go to Devices, then Bluetooth & other devices. Turn on Bluetooth if it's off. Put your Soundcore earbuds in pairing mode, and they'll appear in the list. Click the name to connect. Windows will show "Pairing" and then "Connected" once it's done.

On Mac, open System Preferences (or System Settings on newer versions), go to Bluetooth, and make sure Bluetooth is on. Put the earbuds in pairing mode and click them in the list. The Mac will show "Connecting" and then move them to "My Devices" once paired.

Computers remember Bluetooth pairings just like phones do. The next time you turn on the earbuds near your computer, they should reconnect automatically if Bluetooth is enabled. If your computer has weak Bluetooth range, move closer to it during the initial pairing to may support a strong connection.

Troubleshooting when earbuds won't connect

If your Soundcore earbuds won't pair or keep disconnecting, start by restarting both the earbuds and your phone. Turn off the earbuds completely (put them back in the case and close the lid for 10 seconds), then turn them back on. Restart your phone as well. Try pairing again from the Bluetooth menu.

If that doesn't work, forget the earbuds from your phone's Bluetooth settings and pair them fresh. On Android, long-press the earbuds' name in the Bluetooth menu and tap "Forget" or "Unpair". On iPhone, tap the info icon next to the earbuds' name and select "Forget This Device". Then put the earbuds back in pairing mode and connect again.

If the earbuds still won't connect, the battery may be too low. Charge the case for at least 30 minutes. If you've tried all these steps and the earbuds still won't pair, you may need to reset them to factory settings — check your Soundcore model's manual for the reset button combination, as this varies by model.

Connecting to multiple devices and switching between them

Soundcore earbuds can be paired to several devices at once, but they'll only play audio from one device at a time. Once you've paired them to your phone, you can pair the same earbuds to your tablet or computer by putting them back in pairing mode and selecting them from that device's Bluetooth menu. The earbuds will remember all the devices you've paired them to.

To switch between devices, turn off Bluetooth on the device you're currently using, then turn on Bluetooth on the device you want to use. The earbuds will reconnect to the new device automatically. If both devices have Bluetooth on at the same time, the earbuds may stay connected to whichever one they paired with first, so you may need to manually disconnect them from one device before they'll connect to the other.

Some Soundcore models have a companion app (available on the Google Play Store or Apple App Store) that lets you manage multiple device connections more easily. Check whether your model has an app — if it does, the app can show you which devices are paired and let you switch between them without going into Bluetooth settings.

Frequently Asked Questions

Why do my Soundcore earbuds keep disconnecting?

Disconnections usually happen when your phone's Bluetooth is turned off, the earbuds' battery is low, or there's interference from other wireless devices. Check that Bluetooth is on, charge the earbuds, and move away from microwaves or other 2.4 GHz devices. If disconnections happen in a specific location, try moving to a different room — walls and distance can weaken Bluetooth range.

Can I use Soundcore earbuds with two phones at the same time?

No, Soundcore earbuds will only play audio from one device at a time. If you want to switch from one phone to another, turn off Bluetooth on the first phone, then turn it on on the second phone. The earbuds will reconnect to the second phone automatically.

What should I do if the pairing light won't flash?

A light that won't flash usually means the battery is too low or the earbuds are already paired to another device. Charge the case for at least 30 minutes. If the light still won't flash, try resetting the earbuds by holding the pairing button for 10 to 15 seconds (check your manual for the exact reset time for your model).

Do I need the Soundcore app to use the earbuds?

No, Soundcore earbuds work without the app — they'll connect and play audio through Bluetooth alone. The app is optional and adds features like equalizer controls, firmware updates, and button customization. Check the Google Play Store or Apple App Store to see if an app is available for your specific model.

Why won't my earbuds show up in my phone's Bluetooth list?

Make sure the earbuds are in pairing mode (the light should be flashing blue and white). If they're not flashing, hold the pairing button longer — some models require 5 seconds or more. Also check that your phone's Bluetooth is turned on and that you're looking at the available devices list, not the list of already-paired devices.