The basic steps to pair Skullcandy headphones with iPhone
Turn on your Skullcandy headphones and hold the power button for about 5 to 8 seconds until you see a flashing light — usually blue and red alternating, though the exact pattern depends on your model. This puts the headphones into pairing mode, which means they are broadcasting a signal that your iPhone can detect.
On your iPhone, go to Settings, then Bluetooth, and turn Bluetooth on if it is not already on. Your Skullcandy headphones should appear in the list of available devices within 10 to 15 seconds. Tap the name of your headphones to connect. Once the connection is made, you will see a checkmark next to the headphones name, and the flashing light on the headphones will usually become solid blue.
The first time you pair takes a few extra seconds because your iPhone and headphones are exchanging connection information. After that, your iPhone will remember the headphones and reconnect automatically whenever both devices are turned on and in range of each other — typically within 30 feet.
Key Takeaways
- Hold the power button on your Skullcandy headphones for 5 to 8 seconds until the light flashes to enter pairing mode.
- Open Bluetooth settings on your iPhone, turn Bluetooth on, and tap your headphones name when it appears in the available devices list.
- After the first pairing, your iPhone will reconnect to the headphones automatically whenever both are powered on and nearby.
- If your headphones do not appear in the Bluetooth list, try restarting both devices and putting the headphones back into pairing mode.
What to do if the headphones do not show up in the Bluetooth list
If you have held the power button and the light is flashing but your headphones are not appearing in your iPhone's Bluetooth settings, the devices may be too far apart. Move your iPhone within 10 feet of the headphones and wait another 10 seconds for them to appear.
If they still do not show up, restart both devices. Turn off the headphones completely, then turn them back on and hold the power button again to re-enter pairing mode. On your iPhone, toggle Bluetooth off in Settings, wait 5 seconds, then toggle it back on. This clears any connection confusion between the two devices.
Some Skullcandy models have a dedicated pairing button separate from the power button — check your headphones manual or the Skullcandy website for your specific model number if the power button method does not work. The model number is usually printed on the inside of the headphones or on the charging case.
How to reconnect after the initial pairing
Once your Skullcandy headphones are paired with your iPhone, you do not need to go through the full pairing process again. straightforward turn on the headphones and turn on Bluetooth on your iPhone — they will connect automatically within a few seconds.
If your headphones do not reconnect automatically, open Bluetooth settings and tap the headphones name in the list. If the headphones are not in the list at all, they may have been forgotten. This can happen if you paired them with another device, or if your iPhone ran out of storage space. In that case, put the headphones back into pairing mode and repeat the initial pairing steps.
Switching your headphones between devices
Skullcandy headphones can usually pair with multiple devices, but they can only connect to one device at a time. If you want to use the same headphones with your iPhone one day and a different device the next, you do not need to unpair them — just turn off Bluetooth on the first device and turn it on on the second device.
If your headphones are still trying to connect to a different device, turn off Bluetooth on that device first, then turn on Bluetooth on your iPhone. The headphones will connect to whichever device is closest and has Bluetooth turned on.
If you want to completely remove the headphones from your iPhone so they no longer reconnect automatically, go to Settings, Bluetooth, find the headphones name, tap the information icon next to it, and select "Forget This Device." You will then need to go through the full pairing process again if you want to use them with that iPhone later.
Checking battery level and connection strength
Most Skullcandy headphones show battery level through the number of LED flashes when you first turn them on, or through a voice announcement if your model has that feature. Some models also display battery percentage in your iPhone's Bluetooth settings — look for a battery icon next to the headphones name.
If your headphones keep disconnecting from your iPhone, the battery may be low. Charge them fully and try again. A weak battery can cause the connection to drop, especially if you are moving between rooms or if there are other wireless devices nearby.
If the connection is still unstable after charging, move closer to your iPhone and away from other devices that use Bluetooth or WiFi, such as routers, microwaves, or other headphones. These devices can interfere with the signal.
Troubleshooting sound that is not coming through
If your Skullcandy headphones are connected to your iPhone but you are not hearing sound, check that the volume is turned up on both the headphones and the iPhone. Many Skullcandy models have physical volume buttons on the side or back.
On your iPhone, open Settings, Bluetooth, and tap the information icon next to your headphones name. Make sure the headphones are listed as the active audio output device. If they are not, tap them to switch the audio output to the headphones.
If sound still does not come through, try disconnecting and reconnecting. Go to Bluetooth settings, tap "Forget This Device," then put the headphones back into pairing mode and pair them again. This resets the connection and often fixes audio problems.
Frequently Asked Questions
Can I pair my Skullcandy headphones with multiple iPhones at the same time?
Your headphones can be paired with multiple iPhones in memory, but they can only connect to one device at a time. If you want to switch from one iPhone to another, turn off Bluetooth on the first iPhone and turn it on on the second. The headphones will connect to the second iPhone automatically.
How long does it take for Skullcandy headphones to pair with an iPhone?
The first pairing usually takes 10 to 30 seconds from the moment you tap the headphones name in your iPhone's Bluetooth settings. After that, reconnection is automatic and happens within a few seconds of turning on the headphones.
What if my Skullcandy headphones are stuck in pairing mode and will not connect?
Turn off the headphones completely and let them sit for 30 seconds, then turn them back on and hold the power button again. If they still will not connect, try restarting your iPhone as well. Restart by holding the side button and volume button together until the power-off slider appears, then slide to turn off.
Do I need to unpair my Skullcandy headphones before charging them?
No. You can charge your headphones while they are paired with your iPhone. In fact, they will stay paired and ready to use as soon as they finish charging. Just make sure to turn off Bluetooth on your iPhone if you do not want them to reconnect while charging.
Why do my Skullcandy headphones keep disconnecting from my iPhone?
Low battery is the most common cause. Charge your headphones fully and try again. If disconnections continue, move away from other wireless devices like routers or microwaves, which can interfere with the Bluetooth signal. You can also try forgetting the headphones in Bluetooth settings and pairing them again.