The basic connection process takes three to five minutes
Skullcandy earbuds connect through Bluetooth, the same wireless standard your phone uses for other devices. The process is the same whether you own Skullcandy Dime, Crusher, Grind, or most other Skullcandy models: put the earbuds in pairing mode, then select them from your phone or computer's Bluetooth menu. Most people complete this once and never repeat it—after the first connection, your earbuds automatically reconnect when you turn them on.
The exact steps depend slightly on whether you are using an iPhone, Android phone, or computer, but the core idea is identical. Your earbuds need to "know" your device, and your device needs to "know" your earbuds. Pairing mode is how you introduce them to each other.
Key Takeaways
- Put your Skullcandy earbuds in pairing mode by holding the button on the charging case for 10 to 15 seconds until the LED flashes white or blue.
- On your phone or computer, open Bluetooth settings and select your Skullcandy model from the list of available devices.
- Once paired, your earbuds will reconnect automatically the next time you turn them on, as long as Bluetooth is enabled on your device.
- If your earbuds do not appear in the Bluetooth list, reset them by holding the button for 15 to 20 seconds until the LED turns off, then try pairing again.
- Skullcandy earbuds can pair with multiple devices, but they can only connect to one device at a time.
How to put Skullcandy earbuds in pairing mode
Pairing mode is the state that lets your earbuds broadcast their presence to nearby devices. To enter pairing mode, hold down the button on the back of your Skullcandy charging case for 10 to 15 seconds. The LED light on the case will flash—usually white or blue, depending on your model. When you see the flashing light, your earbuds are in pairing mode and ready to be found.
Some Skullcandy models have the button on the earbuds themselves rather than the case. If your case has no button, try holding the button on one of the earbuds for 10 to 15 seconds instead. Check your product manual or the Skullcandy website for your specific model if you are unsure where the button is.
Pairing mode usually lasts for about two minutes. If the LED stops flashing and you have not yet selected your earbuds on your phone, put them back in pairing mode and try again.
Connecting to an iPhone or iPad
Open the Settings app on your iPhone or iPad and tap Bluetooth. Make sure Bluetooth is turned on—the toggle at the top should be green. Your Skullcandy earbuds should appear in the list under "Other Devices" within a few seconds of entering pairing mode. Tap the name of your earbuds to connect.
Your phone will show "Connecting" briefly, then display "Connected" next to your earbuds' name. You may see a popup asking you to confirm the connection—tap "Connect" or "Pair" if prompted. Once connected, the LED on your earbuds will stop flashing and stay solid, usually white or blue depending on the model.
The next time you turn on your earbuds with Bluetooth enabled on your iPhone, they will reconnect automatically without needing to enter pairing mode again.
Connecting to an Android phone
Open Settings on your Android phone and go to Connected Devices or Bluetooth—the exact name varies by phone manufacturer. Turn on Bluetooth if it is not already on. Your Skullcandy earbuds should appear in the list of available devices within a few seconds. Tap the name to connect.
Android will show "Pairing" briefly, then "Connected" once the link is established. Some Android phones ask you to confirm a pairing code—if you see a popup, tap "Pair" to proceed. After the first connection, your earbuds will reconnect automatically whenever you turn them on and Bluetooth is enabled.
If your earbuds do not appear in the list, make sure they are still in pairing mode—the LED should be flashing. If the LED has stopped flashing, hold the button again for 10 to 15 seconds and check the Bluetooth list again.
Connecting to a Windows or Mac computer
On Windows, open Settings, go to Devices, then Bluetooth and Other Devices. Turn on Bluetooth and wait a few seconds for your Skullcandy earbuds to appear in the list. Click the name of your earbuds to connect. Windows will show "Pairing" briefly, then "Connected" once the link is established.
On Mac, open System Preferences (or System Settings on newer versions), go to Bluetooth, and make sure Bluetooth is on. Your Skullcandy earbuds should appear in the list of available devices. Click the "Connect" button next to your earbuds' name. Once connected, the status will change to "Connected".
After the first connection, your earbuds will reconnect automatically when you turn them on and Bluetooth is enabled on your computer. If you want to disconnect without turning off the earbuds, you can click "Disconnect" in the Bluetooth menu—this does not erase the pairing, so reconnection is when ready the next time.
What to do if your earbuds will not pair
If your Skullcandy earbuds do not appear in the Bluetooth list, the most common fix is to reset them. Hold the button on your charging case for 15 to 20 seconds—longer than the pairing mode hold—until the LED turns off completely. Wait a few seconds, then hold the button again for 10 to 15 seconds until the LED flashes. Now try pairing again from your phone or computer's Bluetooth menu.
If resetting does not work, check that Bluetooth is actually turned on on your device. On phones, swipe down from the top of the screen and look for the Bluetooth icon—it should be highlighted or colored. On computers, open Bluetooth settings and confirm the toggle is on.
Make sure your earbuds are charged. If the battery is very low, they may not have enough power to enter pairing mode. Charge them for at least 15 minutes in the case, then try again. If your earbuds still will not pair after a reset and a charge, try "forgetting" the device on your phone or computer—go to Bluetooth settings, find your earbuds' name, and select "Forget" or "Remove"—then put the earbuds back in pairing mode and pair them as if for the first time.
Pairing with multiple devices
Skullcandy earbuds can remember multiple devices—you can pair them with your phone, tablet, and computer all at once. However, they can only play audio from one device at a time. When you turn on your earbuds, they will automatically connect to whichever device they were last connected to.
If you want to switch to a different device, open the Bluetooth menu on that device and select your earbuds. The connection will switch when ready. You do not need to enter pairing mode again unless you are pairing with a completely new device for the first time.
If you want to remove a device from your earbuds' memory—for example, if you sell an old phone—go to that device's Bluetooth settings, find your earbuds' name, and select "Forget" or "Remove". This does not affect the pairing with your other devices.
Frequently Asked Questions
Why do my Skullcandy earbuds keep disconnecting?
Disconnections usually happen when your phone or computer is too far from the earbuds—Bluetooth typically works within 30 feet, but walls and interference can reduce that range. Try moving closer to your device. If disconnections happen even when you are nearby, reset your earbuds by holding the button for 15 to 20 seconds until the LED turns off, then pair them again.
Can I pair my Skullcandy earbuds with two phones at the same time?
Your earbuds can remember two or more phones, but they can only connect to one at a time. When you turn them on, they will connect to whichever phone they were last used with. To switch to a different phone, open that phone's Bluetooth menu and select your earbuds.
What does it mean when the LED is flashing different colors?
A white or blue flashing LED means your earbuds are in pairing mode and ready to connect. A solid light means they are connected and in use. A red light usually indicates low battery. Check your Skullcandy model's manual for the exact meaning of each color, as it varies by product.
Do I have to pair my Skullcandy earbuds every time I use them?
No. Once you pair them the first time, they will reconnect automatically whenever you turn them on and Bluetooth is enabled on your device. You only need to enter pairing mode again if you are connecting to a brand-new device or if you reset the earbuds.
How do I know if my Skullcandy earbuds are actually paired?
Once paired, your earbuds will appear in your device's Bluetooth menu with the status "Connected" next to the name. The LED on your earbuds will also stop flashing and show a solid light. If you see "Connected" in the Bluetooth menu, the pairing is complete and you can use them.