Connecting Shokz to iPhone using Bluetooth

Shokz bone conduction headphones connect to your iPhone the same way any wireless headset does — through Bluetooth, the wireless standard built into every iPhone. The process takes about two minutes and you only have to do it once; after that, your iPhone remembers the headphones and reconnects automatically when you turn them on.

Before you start, make sure your Shokz headphones are charged. Most Shokz models show a light indicator on the device itself — usually a solid color means ready to use, and a blinking light means low battery. Check your specific model's manual if you are unsure, but the headphones will still pair even with low charge.

The first time you connect, your Shokz headphones need to be in pairing mode, which means they are actively looking for a device to connect to. For most Shokz models, you hold down the power button for about 5 to 7 seconds until you hear a voice prompt or see a light pattern that indicates pairing mode. The exact timing varies slightly by model — if holding for 5 seconds does not work, try 7 or 8 seconds. You will hear an audio cue or see a flashing light when pairing mode is active.

Key Takeaways

  • Put your Shokz headphones in pairing mode by holding the power button for 5 to 8 seconds until you hear a voice prompt or see a flashing light.
  • Open Settings on your iPhone, tap Bluetooth, and select your Shokz model from the list of available devices.
  • Once paired, your iPhone will reconnect automatically every time you turn the headphones on, so you only pair once.
  • If your headphones do not appear in the Bluetooth list, restart both the headphones and your iPhone, then try pairing again.
  • You can pair the same Shokz headphones with multiple devices, but they will only connect to one device at a time.

Steps to pair your Shokz headphones with iPhone

Start with your Shokz headphones in pairing mode. On your iPhone, open the Settings app — it is the gray gear icon on your home screen. Tap Bluetooth, which is usually near the top of the Settings menu.

You should see a list of available devices. Look for your Shokz model name — it will appear as something like "Shokz OpenMove" or "Shokz OpenFit" depending on which version you own. Tap the name to connect. Your iPhone will show "Connecting" for a few seconds, then display "Connected" next to the device name. You may also hear a voice prompt from the headphones confirming the connection.

Once connected, you can close the Settings app and start using your headphones. Audio from calls, music, podcasts, and videos will now play through the Shokz headphones instead of your iPhone speaker. The next time you turn on your headphones, your iPhone will reconnect without you having to do anything.

What to do if your Shokz headphones do not appear in the Bluetooth list

If you do not see your Shokz model listed after putting them in pairing mode, the most common cause is that pairing mode did not set up. Turn off the headphones completely by holding the power button for 10 seconds until the light goes out. Wait 5 seconds, then turn them back on and when ready hold the power button again for 5 to 8 seconds. You should hear a distinct audio cue — often a voice saying "pairing mode" — when it works.

If the headphones still do not appear, restart your iPhone. Press and hold the side button and either volume button until you see the power-off slider. Slide to turn off, wait 10 seconds, then press the side button again to turn back on. Once your iPhone has restarted, go back to Settings > Bluetooth and try pairing again with the headphones in pairing mode.

If you have already paired these headphones with another device — a computer, tablet, or different phone — they may still be connected to that device. Shokz headphones can only connect to one device at a time. Turn off Bluetooth on any other device you have used them with, then try pairing with your iPhone again.

Reconnecting after the initial pairing

After you have paired your Shokz headphones once, you do not need to put them in pairing mode again. straightforward turn on the headphones by pressing the power button. Within a few seconds, your iPhone will recognize them and connect automatically. You will hear a voice prompt or tone confirming the connection.

If your iPhone does not reconnect automatically, open Settings > Bluetooth and tap your Shokz model in the list. This forces an when ready connection. If this happens repeatedly, the pairing may have been lost — delete the headphones from your Bluetooth list by tapping the information icon next to the device name and selecting "Forget This Device," then pair them again from scratch using the steps above.

Using multiple devices with the same Shokz headphones

You can pair your Shokz headphones with as many devices as you want — your iPhone, iPad, Mac, Android phone, or computer. However, they will only play audio from one device at a time. When you turn on the headphones, they automatically connect to whichever device they were last used with.

If you want to switch to a different device, turn off Bluetooth on the current device or move the headphones out of range, then turn on Bluetooth on the device you want to use. Your Shokz headphones will connect to it within a few seconds. You do not need to pair them again; the pairing information stays stored on each device.

Checking your connection and troubleshooting audio problems

Once your Shokz headphones are connected, you can verify the connection by opening Settings > Bluetooth and looking for "Connected" next to your device name. If you see "Not Connected" or the device is not listed at all, the headphones may have lost power or moved out of Bluetooth range — Bluetooth typically works within 30 feet of your iPhone.

If audio is not playing through the headphones even though they show as connected, check your iPhone's volume. Press the volume up button on the side of your phone to make sure the volume is not muted or set to zero. You can also check the Control Center by swiping down from the top-right corner of your screen — look for the volume slider and the Bluetooth icon to confirm the headphones are still connected.

If the headphones are connected but audio cuts out frequently, they may be too far from your iPhone or there may be interference from other wireless devices. Move closer to your phone and away from microwaves, Wi-Fi routers, or other Bluetooth devices. If cutting out continues, restart both the headphones and your iPhone.

Disconnecting your Shokz headphones

You do not need to formally disconnect your Shokz headphones to stop using them. straightforward turn them off by holding the power button, or move them out of Bluetooth range. Your iPhone will stop sending audio to them and switch back to the speaker or another connected audio device.

If you want to remove the pairing entirely — for example, if you are selling the headphones or giving them to someone else — open Settings > Bluetooth, tap the information icon next to your Shokz model, and select "Forget This Device." This removes the pairing from your iPhone. The headphones themselves are not affected and can be paired with a new device when ready.

Frequently Asked Questions

Do I need to put my Shokz headphones in pairing mode every time I use them?

No. Pairing mode is only for the first connection. After that, your iPhone remembers the headphones and reconnects automatically when you turn them on. You only need pairing mode again if you forget the device from your Bluetooth settings or pair the headphones with a completely different phone.

Can I use my Shokz headphones with my iPhone and iPad at the same time?

No, but you can switch between them easily. The headphones will connect to whichever device you last used them with. To switch, turn off Bluetooth on the first device or move the headphones out of range, then turn on Bluetooth on the second device. They will reconnect within a few seconds without needing to pair again.

Why does my iPhone keep disconnecting from my Shokz headphones?

The most common causes are low battery on the headphones, being too far from your iPhone (beyond 30 feet), or interference from other wireless devices. Charge the headphones fully, move closer to your phone, and restart both devices. If disconnections continue, forget the device in Bluetooth settings and pair again from scratch.

What if I lost my Shokz headphones and got new ones — do I need to set them up again?

Yes, new Shokz headphones will need to be paired with your iPhone just like the first pair. Put the new headphones in pairing mode, go to Settings > Bluetooth, and select them from the available devices list. You can forget the old headphones from your Bluetooth settings first if you want to clean up the list.

Can I pair my Shokz headphones with my iPhone if Bluetooth is turned off?

No. Bluetooth must be turned on for pairing to work. Open Settings > Bluetooth and make sure the toggle is switched on (it will be green or blue). Once Bluetooth is on, put your Shokz headphones in pairing mode and select them from the available devices list.