The basic connection process for Plantronics headphones
Connecting Plantronics Bluetooth headphones to a phone, computer, or tablet takes about five minutes and involves putting the headphones into pairing mode, then selecting them from your device's Bluetooth settings. The exact steps depend on which Plantronics model you own — the company makes over 30 different headphone styles — but the underlying process is the same across nearly all of them.
Most Plantronics headphones enter pairing mode when you hold down the power button for 3 to 5 seconds until you see a flashing blue light (some models flash blue and red together). Once the light is flashing, your headphones are discoverable, and you can find them in your device's Bluetooth menu and tap to connect. After the first connection, your device will remember the headphones and reconnect automatically when both are turned on and in range.
Key Takeaways
- Hold the power button for 3 to 5 seconds until the light flashes blue to put most Plantronics headphones into pairing mode.
- Open your device's Bluetooth settings, look for the headphones' model name (usually something like "Plantronics BackBeat" or "Plantronics Voyager"), and tap to connect.
- The first pairing is the only time you need to do this; after that, the headphones reconnect automatically when turned on.
- If the headphones do not appear in your Bluetooth list, restart them by turning them off and on again, then repeat the pairing process.
- Check your headphones' manual or the Plantronics website if your model has a different power button location or uses a separate pairing button instead.
Finding the power button and pairing button on your model
The location of the power button varies by Plantronics model. On over-ear headphones like the BackBeat Pro, the power button is usually on the right ear cup. On smaller models like the Voyager Legend or Explorer 500, it is often a single button on the side or back of the headset. Some models have a dedicated pairing button separate from the power button — usually a small recessed button you press with a paperclip or stylus.
If you are unsure where the button is on your specific model, the quickest way to find out is to look at the manual that came in the box. Plantronics also publishes quick-start guides for each model on their support website; you can search by model number (printed on the headphones themselves or on the charging case) and read the PDF. The manual will show you exactly where to press and how long to hold.
Connecting to an iPhone or iPad
On an iPhone or iPad, open Settings, tap Bluetooth, and make sure the toggle is turned on (it should be green). Put your Plantronics headphones into pairing mode by holding the power button. Within a few seconds, the headphones' name should appear in the list under "Available Devices." Tap the name to connect.
Once connected, you will see "Connected" under the headphones' name, and the Bluetooth icon will appear in the status bar at the top of your screen. The next time you turn on the headphones, your iPhone or iPad will reconnect automatically as long as Bluetooth is on. If the headphones do not appear in the list, turn them off completely, wait 10 seconds, turn them back on, and try again.
Connecting to an Android phone or tablet
The process on Android is nearly identical to iPhone. Open Settings, go to Connected devices or Bluetooth (the exact name varies by manufacturer), and turn Bluetooth on. Put your Plantronics headphones into pairing mode. The headphones should appear in the list of available devices within 10 seconds. Tap the name to pair.
Android will show "Connected" or a checkmark next to the headphones' name once pairing is complete. Like iPhone, your Android device will remember the headphones and reconnect them automatically in the future. If you have trouble finding the Bluetooth settings on your specific phone, search your device's help documentation for "Bluetooth settings" — the path differs between Samsung, Google Pixel, OnePlus, and other manufacturers.
Connecting to a Windows or Mac computer
On Windows 10 or 11, click the Start button, type "Bluetooth settings," and open the Bluetooth & devices page. Make sure Bluetooth is turned on, then put your Plantronics headphones into pairing mode. Click Add device and select Bluetooth. The headphones should appear in the list within a few seconds; click to connect.
On a Mac, click the Apple menu, go to System Settings (or System Preferences on older versions), select Bluetooth, and turn it on. Put the headphones into pairing mode. The headphones' name will appear in the list of available devices; click Connect next to it. Both Windows and Mac will reconnect automatically when you turn the headphones on in the future.
What to do if the headphones will not pair
If the headphones do not appear in your device's Bluetooth list after 30 seconds, the most common fix is to restart both the headphones and your device. Turn off the headphones completely, wait 10 seconds, and turn them back on. Then put them into pairing mode again by holding the power button. If that does not work, restart your phone or computer and repeat the process.
If the headphones still do not appear, check whether they are already connected to a different device. Plantronics headphones can only connect to one device at a time, so if they are paired with your laptop, they will not show up as available on your phone. Disconnect them from the other device first, then try pairing with your phone. You can also try "forgetting" the headphones from your device's Bluetooth settings and pairing them fresh — look for a settings icon or information button next to the headphones' name in your Bluetooth list.
Switching the headphones between devices
Once your Plantronics headphones are paired with multiple devices, you can switch between them by disconnecting from one and connecting to another. On most phones and computers, you can do this through the Bluetooth settings menu — just tap or click the headphones' name to connect, or look for a "disconnect" option to break the current connection.
Some Plantronics models support multipoint Bluetooth, which means they can stay connected to two devices at once and automatically switch when you take a call or start playing audio on the other device. Check your headphones' manual to see if your model has this feature. If it does, the pairing process is the same, but you will pair with a second device while the headphones are already connected to the first one.
Frequently Asked Questions
Why do my Plantronics headphones keep disconnecting?
Disconnections usually happen when the headphones move out of Bluetooth range (typically 30 feet indoors) or when another device tries to connect at the same time. Move closer to your device and make sure no other devices are attempting to pair. If disconnections happen even when you are close, try forgetting the headphones from your device's Bluetooth settings and pairing them again from scratch.
Can I connect my Plantronics headphones to two devices at the same time?
Standard Plantronics models can only connect to one device at a time. However, some newer models like the BackBeat Pro 2 and Voyager 8200 support multipoint Bluetooth, which keeps them connected to two devices simultaneously. Check your model's manual or the Plantronics website to see if yours has this feature. If it does, you pair with the second device the same way you paired with the first.
The headphones are paired but I do not hear any sound. What should I do?
First, check that your device's volume is turned up and that the headphones themselves are not muted (some models have a mute button on the side). Then go to your device's audio settings and make sure the Plantronics headphones are selected as the output device — on phones this is usually automatic, but on computers you may need to manually switch from your speakers to the headphones.
Do I need to pair my Plantronics headphones every time I use them?
No. After the first pairing, your device remembers the headphones. straightforward turn them on, and they will reconnect automatically as long as Bluetooth is enabled on your device. You only need to go through the pairing process again if you reset the headphones, pair them with a new device, or if you forget them from your device's Bluetooth settings.