Connect Pixel Buds to a Windows or Mac laptop in three steps

Google Pixel Buds connect to a laptop the same way they connect to a phone — through Bluetooth. Take the buds out of the case, hold the button on the back of the case for three seconds until the light blinks white, then go to your laptop's Bluetooth settings and select the Pixel Buds from the list. The whole process takes about two minutes and works on Windows 10, Windows 11, and any recent Mac.

The trickiest part is usually finding where Bluetooth settings live on your specific laptop, since Windows and Mac hide them in different places. Once you know where to look, the connection itself is straightforward — your laptop will see the buds as a single device, not two separate earpieces.

Key Takeaways

  • Hold the button on the back of your Pixel Buds case for three seconds until the light blinks white to put the buds in pairing mode.
  • On Windows, open Settings, go to Devices, then Bluetooth and other devices, and select your Pixel Buds from the list.
  • On Mac, open System Preferences, click Sound, select the Input tab, and choose your Pixel Buds as the audio input device.
  • Once connected, your laptop will remember the Pixel Buds and reconnect automatically the next time you turn them on.
  • If the buds do not appear in your Bluetooth list, restart both the buds and your laptop, then try pairing again.

How to connect Pixel Buds on Windows 10 or 11

Start by putting your Pixel Buds in pairing mode. Open the case and look at the back — there is a small button there. Press and hold it for three seconds. You will see a white light blinking on the case. This means the buds are ready to pair.

Now open your Windows laptop and click the Windows button in the bottom left corner. Type "Bluetooth" into the search box and click "Bluetooth and other devices" from the results. You should see a toggle switch at the top that says "Bluetooth." Make sure it is turned on — it should be blue. Below that, click "Add device" or "Add Bluetooth or other device."

A window will pop up asking what kind of device you want to add. Click "Bluetooth." Your laptop will start searching for nearby devices. Wait about ten seconds. Your Pixel Buds should appear in the list as "Pixel Buds" or "Pixel Buds Pro" depending on which model you have. Click on them. Your laptop will say "Pairing" and then "Connected." You are done.

How to connect Pixel Buds on Mac

Put your Pixel Buds in pairing mode the same way: open the case, hold the button on the back for three seconds, and wait for the white light to blink.

On your Mac, click the Apple menu in the top left corner and select "System Preferences" or "System Settings" depending on your Mac's age. Look for "Bluetooth" or "Sound" — on newer Macs it is under Sound. Click it. You should see a list of available Bluetooth devices. Your Pixel Buds should appear within ten seconds. Click on them. Your Mac will connect automatically.

If you are using the Pixel Buds for audio output (listening to music or videos), you may also need to set them as your default audio device. In the same Sound settings, look for an "Output" tab or section. Select your Pixel Buds from the list. Now all sound from your Mac will play through the buds instead of your laptop speakers.

What to do if your Pixel Buds do not show up

If you held the button for three seconds and the light is blinking but your laptop still does not see the buds, the first thing to try is restarting both devices. Put the Pixel Buds back in the case and close it for ten seconds. Open it again and hold the button for three seconds. At the same time, restart your laptop — click the power button or use the shutdown menu.

Once both devices have restarted, try the pairing steps again. This fixes the problem about 80 percent of the time. If it still does not work, make sure Bluetooth is actually turned on in your laptop settings — it is straightforward to miss the toggle switch. Also check that no other device is currently connected to the Pixel Buds. The buds can only pair with one device at a time, so if they are connected to your phone, your laptop will not be able to pair with them until you disconnect the phone.

If you have tried all of this and the buds still will not appear, try "forgetting" the device from your laptop and starting over. On Windows, go back to Bluetooth settings, find the Pixel Buds in the list, click on them, and select "Remove device." On Mac, click the X next to the Pixel Buds in the Bluetooth menu. Then put the buds back in pairing mode and try connecting again.

How to switch Pixel Buds between your laptop and phone

Pixel Buds can only connect to one device at a time. If you want to use them with your laptop after using them with your phone, you need to disconnect them from your phone first. On your phone, go to Bluetooth settings, find the Pixel Buds in the list, and tap "Forget" or "Unpair."

Once you have done that, put the buds back in the case for a few seconds, then take them out. They will automatically try to reconnect to the last device they were paired with. If that is your laptop, they will connect right away. If you want them to connect to your phone instead, put them in pairing mode again by holding the button on the case for three seconds, then pair them with your phone through its Bluetooth settings.

Troubleshooting sound problems after connecting

Sometimes the Pixel Buds connect to your laptop but no sound comes through. This usually means your laptop is still trying to play audio through your built-in speakers instead of the buds. On Windows, right-click the volume icon in the bottom right corner of your screen and select "Open Volume mixer." Look for your Pixel Buds in the list and make sure the volume slider next to them is not all the way down. You can also click on them to set them as your default device.

On Mac, go back to System Preferences or System Settings, find the Sound section, click the "Output" tab, and make sure your Pixel Buds are selected. If they are selected but you still hear nothing, check the volume slider in that same window. Also check the volume on the Pixel Buds themselves — you can adjust it by tapping the touch area on the outside of each bud, or by using your laptop's volume keys once the buds are set as the default output.

Frequently Asked Questions

Do I have to pair my Pixel Buds every time I use them?

No. Once you pair them once, your laptop will remember them. The next time you turn on the buds, they will automatically reconnect to your laptop if it is nearby and Bluetooth is on. You only need to go through the pairing steps once.

Can I use Pixel Buds with both my laptop and phone at the same time?

No, Pixel Buds can only connect to one device at a time. If you want to switch between your laptop and phone, you need to disconnect them from one device before connecting to the other. This takes about 30 seconds.

Why does my laptop keep disconnecting from the Pixel Buds?

This usually happens if your laptop goes to sleep or if something is blocking the Bluetooth signal. Try keeping your laptop awake while using the buds, and make sure there are no large metal objects or other wireless devices between your laptop and the buds. If disconnections keep happening, restart both devices and try pairing again.

Will my Pixel Buds work with an older laptop?

Pixel Buds work with any laptop that has Bluetooth and runs Windows 10 or later, or Mac OS 10.12 or later. If your laptop is older than that, check your operating system version before trying to connect. Very old laptops without built-in Bluetooth will not work with Pixel Buds.