The basic steps to pair Beats with your phone
Connecting Beats to your phone takes about two minutes and works the same way whether you have AirPods Pro, Beats Studio Pro, Powerbeats, or any other Beats model. Turn on your Beats, hold them close to your phone, and your phone will detect them automatically. Tap the notification that appears, and the pairing is complete — your Beats will then connect to that phone whenever they're powered on and nearby.
The process differs slightly depending on whether you have an iPhone, Android phone, or older Beats model, but the core idea is the same: Beats use Bluetooth to communicate with your phone, and your phone's settings handle the connection. Once paired, you don't have to repeat this process unless you reset your Beats or deliberately unpair them.
Key Takeaways
- Most Beats connect through a notification that appears on your phone screen within seconds of turning them on — you tap it and you're done.
- If no notification appears, go to your phone's Bluetooth settings and select your Beats from the list of available devices.
- Beats remember your phone after the first pairing, so they reconnect automatically the next time you turn them on nearby.
- If your Beats won't connect, restart both the Beats and your phone, then try pairing again.
- Older Beats models may require you to hold a button for several seconds to enter pairing mode before your phone can find them.
Pairing Beats with an iPhone
iPhones and Beats work together most smoothly because both are made by Apple. Turn on your Beats and hold them within a few inches of your iPhone. Within a few seconds, a setup card will appear on your iPhone screen showing your Beats model and a large "Connect" button. Tap that button, and your iPhone will pair with your Beats when ready.
If you see a notification but it disappears before you tap it, open your iPhone's Settings app, tap Bluetooth, and look for your Beats in the list of available devices. Tap the name of your Beats, and they will connect. Once connected, your Beats will show a blue dot next to their name in the Bluetooth settings, and they'll reconnect automatically whenever you turn them on near that iPhone.
Pairing Beats with an Android phone
Android phones don't show the automatic setup card that iPhones do, so you'll need to use your phone's Bluetooth settings. First, turn on your Beats and make sure they're in pairing mode — for most newer Beats, this happens automatically when you turn them on for the first time or after a reset. On your Android phone, open Settings, tap Bluetooth or Connected Devices, and look for your Beats in the list of available devices. Tap the name of your Beats to connect.
Some Android phones show a pairing code on the screen and ask you to confirm it on your Beats — if that happens, just confirm it and the pairing will complete. After that, your Beats will connect automatically whenever you turn them on and your phone's Bluetooth is enabled. If your Beats don't appear in the list, restart your Beats and try again.
Putting older Beats into pairing mode
Beats models from before 2020 — including older Beats Solo, Beats Studio, and Powerbeats — don't turn on automatically or show up in your phone's Bluetooth list right away. Instead, you need to manually enter pairing mode. The method varies by model, but usually involves holding down a button on the headphones for 5 to 10 seconds until a light on the headphones blinks or changes color.
Check the manual that came with your Beats or search the model name plus "pairing mode" online to find the exact button and timing for your headphones. Once the light indicates pairing mode is active, your phone should detect your Beats within a few seconds. Then follow the same steps as you would for a newer model — tap the notification on iPhone or select your Beats from the Bluetooth list on Android.
What to do if your Beats won't connect
If your Beats don't appear in your phone's Bluetooth list or the connection keeps dropping, start by restarting both devices. Turn off your Beats completely, wait 10 seconds, and turn them back on. Then restart your phone by powering it off and back on. After both devices have restarted, try pairing again.
If that doesn't work, forget the pairing and start over. On iPhone, go to Settings > Bluetooth, find your Beats in the list, tap the information icon next to them, and select "Forget This Device." On Android, go to Settings > Bluetooth, tap the gear icon or menu next to your Beats, and select "Unpair" or "Forget." Then turn your Beats off and on again, and pair them fresh as if it were the first time.
If your Beats still won't connect after restarting and forgetting, check that Bluetooth is actually turned on in your phone's settings — it's straightforward to miss. Also make sure your Beats have enough battery; most Beats won't pair if the battery is critically low. Charge them for at least 15 minutes and try again.
Connecting the same Beats to multiple phones
Beats can be paired to multiple phones at once, but they will only actively connect to one at a time. Once you've paired your Beats to your iPhone, you can pair the same Beats to your Android phone, your tablet, or a friend's phone by following the same pairing steps on each device. Your Beats will remember all of them.
When you turn on your Beats, they will automatically connect to whichever device they were last connected to. If you want to switch to a different device, turn off Bluetooth on the current device or move far away from it, then turn on Bluetooth on the device you want to use. Your Beats should connect within a few seconds. This is useful if you use the same Beats with both a work phone and a personal phone, or if you share them with someone else.
Checking your connection and battery
Once your Beats are connected, you can see their battery level on your phone. On iPhone, open Control Center by swiping down from the top right corner, and you'll see your Beats listed with their battery percentage. On Android, the battery display depends on your phone model and manufacturer, but you can always check by going to Settings > Bluetooth and looking at your Beats in the list of connected devices.
If your Beats are connected but you're not hearing sound, check that your phone's volume is turned up and that the audio is actually being sent to your Beats. On iPhone, look at the volume slider in Control Center to confirm it's not muted. On Android, check your phone's volume buttons and make sure the sound isn't being routed to your phone's speaker instead. If you're still not hearing anything, try disconnecting and reconnecting your Beats.
Frequently Asked Questions
Why does my phone show my Beats in Bluetooth settings but won't actually connect?
This usually means your Beats are paired but not actively connecting. Try forgetting the device completely from your phone's Bluetooth settings, restart both your Beats and phone, and pair them again from scratch. If the problem persists, your Beats may need a factory reset — check your model's manual for how to do this.
Can I use my Beats with two phones at the same time?
No, Beats can only play audio from one device at a time, even if they're paired to multiple phones. They will automatically connect to whichever device they were last used with. To switch to a different phone, disconnect from the first phone's Bluetooth and then turn on Bluetooth on the second phone.
My Beats keep disconnecting from my phone. What should I do?
Disconnections usually happen because your phone and Beats are too far apart, another device is interfering, or the Beats battery is low. Keep your Beats within 30 feet of your phone, charge your Beats fully, and restart both devices. If disconnections continue, forget the pairing and pair again.
Do I need to pair my Beats every time I use them?
No. After the first pairing, your Beats will automatically connect to your phone whenever you turn them on and your phone's Bluetooth is enabled. You only need to pair manually if you reset your Beats, pair them to a different phone, or forget the pairing in your phone's settings.
What if my Beats are really old and I don't know how to put them in pairing mode?
Search online for your specific Beats model name plus "pairing mode" — you'll find the exact button to hold and how long to hold it. If you can't find instructions, try holding the power button for 10 seconds and watching for a light to blink or change color. Once you see that, your Beats are in pairing mode and your phone should detect them.