Connecting Beats to your phone, computer, or tablet

Beats headphones connect through Bluetooth, a wireless standard that lets devices talk to each other over short distances. The process is the same whether you own AirPods Pro, Beats Studio Pro, Beats Solo 4, or any other Beats model: turn on Bluetooth on your device, put your Beats into pairing mode, and select them from the list that appears. Most Beats will pair with your device in under a minute and remember it afterward, so you only do this once per device.

The exact steps depend on whether you are using an iPhone, Android phone, Mac, Windows computer, or tablet. Each operating system shows Bluetooth settings in a different place, but the principle is identical. Your Beats will appear in a list of available devices, and tapping or clicking the name completes the connection.

Key Takeaways

  • Beats connect via Bluetooth and must be in pairing mode the first time you connect them to a new device.
  • On iPhones and iPads, go to Settings > Bluetooth, turn Bluetooth on, and tap your Beats model when it appears in the list.
  • On Android phones, open Settings > Connected Devices > Bluetooth, turn Bluetooth on, and tap your Beats from the available devices list.
  • On Mac computers, go to System Settings > Bluetooth, turn Bluetooth on, and select your Beats when they appear.
  • On Windows computers, go to Settings > Bluetooth & Devices, turn Bluetooth on, and click your Beats model from the list.

How to put your Beats into pairing mode

Before your Beats will show up on your device's Bluetooth list, they need to be in pairing mode. This tells the headphones to broadcast their presence so nearby devices can find them. The method varies slightly by model, but most Beats use the same approach: hold down the power button or a dedicated pairing button for several seconds until you see a light flash or hear a tone.

For most current Beats models like the Solo 4 and Studio Pro, hold the power button on the side of the headphones for about 5 to 10 seconds. You will see the LED light flash white and red, or hear a voice prompt saying "pairing mode". Once you see or hear this signal, your Beats are ready to be found. If you are connecting to a second device, you may need to hold the button again to re-enter pairing mode, depending on the model.

Check the manual or the Beats website for your specific model if the button hold does not work. Some older Beats models use a different button combination, and the documentation will show you exactly which button and how long to hold it.

Connecting Beats to an iPhone or iPad

On any iPhone or iPad, open the Settings app and tap Bluetooth. Toggle Bluetooth on if it is not already on. Your device will begin scanning for nearby Bluetooth devices. Within a few seconds, your Beats should appear in the list under "Other Devices" or "Available Devices". Tap the name of your Beats model, and the connection will complete automatically.

Once connected, your Beats will show a checkmark next to their name and will appear under "My Devices" at the top of the Bluetooth menu. From that point on, whenever you turn on your Beats near your iPhone or iPad, they will reconnect automatically without any further steps. If you want to disconnect them, you can tap the information icon next to the Beats name and select "Forget This Device", but this is rarely necessary.

Connecting Beats to an Android phone

On Android, the path to Bluetooth settings varies slightly depending on your phone's manufacturer, but the process is similar. Open Settings, then look for Connected Devices, Bluetooth, or Connections (the exact name depends on your phone). Tap the option to turn Bluetooth on. Your phone will scan for nearby devices, and your Beats should appear in the list within a few seconds.

Tap your Beats model name to connect. You may see a pairing request pop up on your phone asking you to confirm the connection — if so, tap "Pair" or "Connect". Once the connection is complete, your Beats will show as "Connected" in the Bluetooth menu. Like with iPhones, your Android phone will remember your Beats and reconnect automatically the next time they are nearby and turned on.

Connecting Beats to a Mac computer

On a Mac, click the Apple menu in the top-left corner and select System Settings (or System Preferences on older macOS versions). Click Bluetooth in the sidebar. Make sure Bluetooth is turned on. Your Beats should appear in the list of available devices within a few seconds of entering pairing mode. Click your Beats model name to connect.

Your Mac will pair with the Beats and remember them for future use. Once paired, you can control audio playback from your Mac using the Beats' buttons, and you can switch between your Mac and other devices (like your iPhone) by straightforward selecting the Beats from that device's Bluetooth menu. Your Beats will disconnect from the Mac and connect to the new device automatically.

Connecting Beats to a Windows computer

On Windows 10 or 11, click the Start menu and open Settings. Go to Bluetooth & Devices (or Devices on older Windows versions). Toggle Bluetooth on. Click Add Device or Pair New Device, then select Bluetooth from the options that appear. Your computer will scan for nearby devices, and your Beats should show up in the list.

Click your Beats model to pair them. Windows may ask you to confirm the pairing — if so, click "Yes" or "Connect". Once the pairing is complete, your Beats will appear in the list of paired devices. You can now use them with your Windows computer. They will reconnect automatically whenever you turn them on near your computer, just as they do with phones and tablets.

Troubleshooting when your Beats won't connect

If your Beats do not appear in the Bluetooth list, the most common fix is to restart both devices. Turn off your Beats completely, wait 10 seconds, and turn them back on. At the same time, toggle Bluetooth off on your phone or computer, wait a few seconds, and toggle it back on. Then put your Beats into pairing mode again and try to connect.

If they still do not appear, make sure your Beats are fully charged — a low battery can prevent pairing. Also check that your Beats are not already connected to another device in the same room. Beats can only connect to one device at a time, so if they are paired with your phone, they will not show up as available on your computer until you disconnect them from the phone first.

If you have tried these steps and your Beats still will not pair, try "forgetting" them from your device's Bluetooth menu and starting the pairing process over from the beginning. On iPhones and Macs, tap or click the information icon next to your Beats and select "Forget This Device". On Android and Windows, look for a "Forget" or "Remove" option in the Bluetooth settings. Then put your Beats back into pairing mode and connect them as if for the first time.

Switching your Beats between multiple devices

Once your Beats are paired with multiple devices, you can switch between them without re-pairing. straightforward disconnect your Beats from the current device by turning off Bluetooth on that device or turning off the Beats themselves. Then turn on Bluetooth on the device you want to use, put your Beats back on, and they will reconnect to that device automatically.

Some Beats models, like the Studio Pro, support multipoint connection, which means they can stay connected to two devices at once and automatically switch between them when you start playing audio on a different device. Check your Beats model's specifications to see if this feature is available. If your model supports it, you may need to enable multipoint in the Beats app on your phone.

Frequently Asked Questions

Why do my Beats keep disconnecting?

Disconnections usually happen when your Beats move out of Bluetooth range (typically 30 feet or less) or when another device in the area is trying to connect to them. Make sure your Beats are not already paired with another device nearby. If disconnections happen frequently even when your device is close, try forgetting the Beats and re-pairing them from scratch.

Can I connect my Beats to multiple devices at the same time?

Most Beats can only play audio from one device at a time, but they can be paired with many devices. You can switch between them by disconnecting from one and connecting to another. Some newer models like the Beats Studio Pro support multipoint connection, which lets them stay connected to two devices simultaneously and switch automatically when you start playing audio.

What if I forgot which device my Beats are currently paired with?

Put your Beats into pairing mode and check which device's Bluetooth menu shows them as available. That device is not currently paired with them. The device where your Beats appear as "Connected" is the one they are currently paired with. You can then disconnect from that device and pair with a different one if needed.

Do I need the Beats app to connect my headphones?

No. Beats connect through standard Bluetooth and work without any app. However, the Beats app (available on iPhone, iPad, and Android) lets you adjust sound settings, check battery level, and enable features like multipoint connection on supported models. It is optional but useful if you want more control over your headphones.

Why does my device show my Beats as "paired" but not "connected"?

Paired means your device remembers your Beats from a previous connection. Connected means they are actively linked right now. To connect paired Beats, make sure they are turned on and in range, then toggle Bluetooth off and back on on your device, or restart your Beats. They should reconnect automatically within a few seconds.