The simplest way to connect an LG soundbar
Most LG soundbars connect to your TV using a single cable called HDMI ARC, which carries both picture and sound through one connection. This is the fastest route and requires no setup beyond plugging in the cable and switching one setting on your TV. If your TV does not have HDMI ARC, you can use an optical cable instead, which is slightly slower to set up but works just as reliably.
Before you start, locate the HDMI ports on the back of your TV and soundbar. Look for one labeled HDMI ARC or eARC — this is different from the other HDMI ports. If you cannot find it, check your TV's manual or look at the port labels printed on the back panel. Most TVs made after 2015 have at least one ARC port.
The entire connection takes about five minutes. You will plug in one cable, turn on the soundbar, and then adjust one setting on your TV so the sound goes to the soundbar instead of the TV's speakers. After that, the soundbar will turn on and off automatically with your TV.
Key Takeaways
- HDMI ARC is the easiest connection method and requires only one cable plugged into the ARC port on both your TV and soundbar.
- If your TV does not have HDMI ARC, an optical cable works as a backup and connects to the optical port instead.
- After connecting the cable, you must change your TV's audio output setting to send sound to the soundbar rather than the TV speakers.
- Bluetooth is an option for some LG soundbars but is less reliable for TV use because the connection can drop if you move the remote or change inputs.
Connecting with HDMI ARC cable
Start by powering off both your TV and soundbar. This prevents any electrical issues and makes sure the connection registers correctly when you turn them back on. Locate the HDMI ARC port on your TV — it is usually labeled on the back panel and is often HDMI port 3 or 4, though this varies by model.
Plug one end of an HDMI cable into the HDMI ARC port on your TV. Plug the other end into the HDMI ARC port on the back of your soundbar. The cable should sit flat and click into place; if it does not click, it is not fully inserted. Turn both devices back on and wait 30 seconds for them to recognize each other.
Now change your TV's audio output. On most TVs, press the menu or settings button on your remote, then look for a section called Sound, Audio, or Speaker Settings. Find the option that says Audio Output, Speaker Output, or Sound Output. Change it from Internal Speakers or TV Speaker to HDMI ARC, Soundbar, or External Speaker. The exact wording depends on your TV brand, but the concept is the same across all models.
Test the connection by turning up the volume on your TV remote. You should hear sound from the soundbar, not from the TV. If you hear nothing, go back to the audio output menu and confirm the setting was saved. If sound still comes from the TV speakers, your TV may not support HDMI ARC — move to the optical cable section below.
Connecting with an optical cable if HDMI ARC is not available
An optical cable is a thin cord with a small square connector on each end. It carries sound only, not picture, so your TV still needs to be connected to your soundbar or receiver with HDMI for video. This method works on almost all TVs, even older models that do not have HDMI ARC.
Power off both devices. Locate the optical port on your TV — it is usually on the back panel and labeled Optical, SPDIF, or Toslink. It looks like a small square hole. Plug one end of the optical cable into this port on your TV. Plug the other end into the optical port on your soundbar. Push gently until you hear a small click.
Turn both devices back on and wait 30 seconds. Go to your TV's audio settings the same way you would for HDMI ARC — press menu or settings, find Sound or Audio, then look for Audio Output. Change the setting to Optical, Digital Audio Out, or External Speaker. Save the change and test the volume with your TV remote.
If you hear nothing, check that the optical cable is fully inserted on both ends. Optical cables are more sensitive to loose connections than HDMI cables. If the cable is seated firmly and you still hear no sound, your TV may default to HDMI audio even when an optical cable is connected — in this case, check whether your TV has a setting to disable HDMI audio output.
Connecting via Bluetooth if you prefer wireless
Some LG soundbars support Bluetooth, which means you can pair them to your TV without any cable. This is convenient for a clean setup, but Bluetooth can be less stable for TV use because the connection sometimes drops if you move the remote or switch inputs. Use this method only if HDMI ARC and optical are not options for you.
Put your soundbar into pairing mode. On most LG soundbars, you hold down the Bluetooth button on the remote or the soundbar itself for three seconds until you see a light blink on the soundbar. Consult your soundbar's manual if you are unsure which button to press — the manual is usually available as a PDF on LG's website.
On your TV, go to Settings, then look for Bluetooth or Wireless Devices. Select your soundbar from the list of available devices. Your TV will ask you to confirm the pairing — select Yes or Pair. Once paired, your TV should automatically send audio to the soundbar when you turn it on.
Bluetooth pairing is less reliable than wired connections, so if you experience dropouts or delays, switch back to HDMI ARC or optical. Bluetooth also does not support the higher-quality audio formats that HDMI ARC does, so you may notice a slight difference in sound quality.
Adjusting volume and input settings after connection
Once your soundbar is connected and receiving sound, you may need to adjust how the volume works. Some TVs let you control the soundbar volume with your TV remote, while others require you to use the soundbar remote. This depends on your TV model and the connection type you chose.
If you connected via HDMI ARC, your TV remote should control the soundbar volume automatically. Test this by pressing the volume up and down buttons on your TV remote and listening to the soundbar. If the TV volume changes but the soundbar does not, go back to your TV's audio settings and look for an option called HDMI Control, CEC, or Anynet+. Turn this on — it allows your TV remote to control the soundbar.
If you connected via optical cable, you will usually need to use the soundbar remote to adjust volume. The TV remote will not control it because optical cables only carry sound, not control signals. Keep both remotes nearby or consider using a universal remote that can control both devices.
When you switch TV inputs — for example, from cable to a streaming device — the soundbar should stay on and continue playing sound. If the soundbar turns off or goes silent, check that your TV's audio output is still set to the soundbar. Some TV inputs default back to internal speakers, so you may need to change the audio output setting again.
Troubleshooting when the soundbar does not produce sound
If you have connected the cable but hear nothing from the soundbar, start with the simplest checks. Make sure the soundbar is powered on — look for a light on the front panel. Make sure the volume on the soundbar itself is not muted or turned all the way down. Press the mute button on the soundbar remote to unmute it if needed.
Next, confirm that your TV's audio output setting is actually pointing to the soundbar. Go back to your TV's audio settings and check the current selection. If it still says Internal Speakers or TV Speaker, the setting did not save. Change it again and look for a Save or explore button. Some TVs require you to press a confirmation button after changing audio settings.
If the cable is connected and the audio output is set correctly but you still hear nothing, try unplugging the soundbar for 30 seconds, then plugging it back in. This resets the soundbar and sometimes clears connection errors. Wait another 30 seconds after powering it back on before testing again.
For HDMI ARC connections, check whether your TV actually supports ARC on that specific port. Some TVs have ARC on only one HDMI port, and plugging into the wrong port will not work. Consult your TV's manual to confirm which port supports ARC, then move the cable if needed. For optical connections, inspect the cable for any visible damage or debris inside the ports — even a small piece of dust can block the signal.
Frequently Asked Questions
Do I need to use HDMI ARC or can I just use any HDMI port?
You must use the HDMI ARC port specifically. Regular HDMI ports only carry picture, not sound. Using a regular HDMI port will not send audio to the soundbar. Check your TV manual to find which port is labeled ARC or eARC.
Can I use both the TV speakers and the soundbar at the same time?
No. When you set your TV's audio output to the soundbar, the TV speakers turn off. If you want to use both, you would need a receiver or audio switcher, which is beyond a basic soundbar setup. For most people, using only the soundbar is the goal.
Why does the soundbar turn off when I switch to a different TV input?
Some TV inputs reset the audio output back to internal speakers. When this happens, the soundbar receives no signal and turns off. Go to your TV's audio settings and change the output back to the soundbar. If this happens repeatedly, check whether your TV has a setting to lock the audio output across all inputs.
Is it okay to leave the soundbar on all the time?
Yes. Most LG soundbars are designed to stay in standby mode when not in use, which uses very little power. They will turn on automatically when your TV sends them a signal. Leaving it on standby is normal and will not damage the device or significantly increase your electricity bill.
What if my TV does not have an ARC port at all?
Use an optical cable instead. Nearly all TVs have an optical port, even older models. Optical works just as well as HDMI ARC for basic soundbar use, though it does not support some advanced audio formats. If your TV has neither ARC nor optical, Bluetooth is your only option, though it is less reliable for TV use.