Pairing your JBL Flip 4 for the first time
The JBL Flip 4 connects via Bluetooth, a wireless standard that lets it talk to your phone, tablet, or computer without cables. The first time you use it, you need to put the speaker in pairing mode so your device can find it and remember it.
Turn on the speaker by pressing the power button on the back (the circular button with the JBL logo). You'll hear a startup sound and see a blue light. The speaker automatically enters pairing mode for the first two minutes after it powers on. On your phone or tablet, go to Settings, find Bluetooth, turn it on, and look for "JBL Flip 4" in the list of available devices. Tap it. Your device will say "Connected" when it's done.
If you miss the two-minute window, press and hold the Bluetooth button (the one with the Bluetooth symbol) on the back of the speaker for about three seconds until you hear a sound and see the light flash. Then search for it again on your device.
Key Takeaways
- Turn on the speaker and it enters pairing mode automatically for two minutes — go to your device's Bluetooth settings and tap "JBL Flip 4" to connect.
- Once paired, the speaker reconnects to that device automatically when you turn it on, as long as Bluetooth is on.
- To connect to a different device, press and hold the Bluetooth button for three seconds to re-enter pairing mode.
- If your device doesn't find the speaker, restart Bluetooth on your phone or tablet and try again.
- The speaker can remember up to eight devices, but only connects to one at a time.
Connecting to a second device without forgetting the first
The JBL Flip 4 remembers up to eight devices. Once you've paired it with your phone, you can pair it with a tablet or computer without erasing the phone connection. Press and hold the Bluetooth button for three seconds. Your tablet or computer will see "JBL Flip 4" in its Bluetooth list — tap it to connect.
The speaker will now be paired with both devices. When you turn on the speaker, it tries to reconnect to whichever device it last played audio from. If you want to switch to a different device, go to that device's Bluetooth settings and tap "JBL Flip 4" again. The speaker will disconnect from the first device and connect to the second one.
Reconnecting after turning the speaker off
Once you've paired the JBL Flip 4 with a device, it remembers that pairing. The next time you turn on the speaker, it automatically searches for that device and reconnects — you don't have to do anything. Make sure Bluetooth is turned on in your phone or tablet's settings.
If the speaker doesn't reconnect after you turn it on, check that Bluetooth is on. If it still doesn't connect, go to your device's Bluetooth settings, find "JBL Flip 4" in the list of paired devices, and tap it. The connection should happen in a few seconds.
Connecting to a Windows or Mac computer
The process is the same on a computer as on a phone. Turn on the speaker and press the Bluetooth button if it doesn't enter pairing mode automatically. On Windows 10 or 11, go to Settings, then Devices, then Bluetooth and other devices. Click "Add Bluetooth or other device" and select "Bluetooth." Wait for "JBL Flip 4" to appear and click it.
On a Mac, go to System Preferences (or System Settings on newer versions), click Bluetooth, and wait for "JBL Flip 4" to appear in the list. Click "Connect" next to it. Once connected, the speaker will show up in your Mac's sound output menu — you can click the speaker icon in the menu bar and select "JBL Flip 4" to send audio to it.
On Windows, after pairing, right-click the speaker icon in the system tray (bottom right corner) and select "Open Sound settings." Under "Output," choose "JBL Flip 4" from the dropdown menu.
Fixing connection problems
If your device can't find the speaker, make sure it's turned on and the Bluetooth button has been pressed. Wait a few seconds for the speaker to appear in the list. If it doesn't show up, restart Bluetooth on your phone or computer: turn Bluetooth off, wait five seconds, and turn it back on. Then try searching again.
If the speaker was previously paired but won't reconnect, "forget" it and pair it again. On an iPhone or iPad, go to Settings, Bluetooth, find "JBL Flip 4," tap the information icon next to it, and select "Forget This Device." On Android, go to Settings, Bluetooth, long-press "JBL Flip 4," and tap "Unpair." Then press the Bluetooth button on the speaker for three seconds and pair it again.
If the speaker connects but produces no sound, check that the volume on the speaker itself is turned up (use the volume buttons on the side). Also check that the volume on your device is not muted or set to zero. If you're on a computer, make sure "JBL Flip 4" is selected as the output device in your sound settings.
Using the speaker with multiple devices at once
The JBL Flip 4 can be paired with many devices but only plays audio from one at a time. If you have your phone and tablet both paired, and both are trying to send audio to the speaker, only one will actually play. To switch which device is playing, pause audio on the first device and start playing on the second. The speaker will automatically switch to the device that's actively sending sound.
This is useful if you're listening to music on your phone and want to quickly switch to a video call on your tablet — just start the call and the speaker will switch over. When you're done with the call and want to go back to music, pause the call and press play on your phone.
Resetting the speaker if pairing stops working
If the speaker won't pair with any device no matter what you try, you can reset it to factory settings. This erases all paired devices and returns the speaker to how it was when new. Press and hold both the power button and the Bluetooth button at the same time for about ten seconds. You'll hear a sound and the light will flash. The speaker is now reset.
After a reset, turn the speaker on again and it will enter pairing mode. Go to your device's Bluetooth settings and pair it as if it were new. This usually solves connection problems that won't go away any other way.
Frequently Asked Questions
Do I need to pair the speaker every time I use it?
No. Once you've paired it with a device, that device remembers the connection. Just turn on the speaker and Bluetooth on your device, and they reconnect automatically. You only pair once per device.
Can I use the speaker with two devices at the same time?
The speaker can be paired with multiple devices, but it only plays audio from one at a time. If both devices are trying to send sound, only one will actually play. You can switch by pausing one device and playing on the other.
What if the speaker pairs but I don't hear any sound?
Check the volume buttons on the side of the speaker and make sure they're turned up. Also check that your phone or computer's volume is not muted or at zero. On a computer, confirm that "JBL Flip 4" is selected as the output device in your sound settings.
How do I connect the speaker to a different device?
Press and hold the Bluetooth button on the speaker for three seconds to re-enter pairing mode. Then go to your new device's Bluetooth settings and tap "JBL Flip 4." The speaker will disconnect from the old device and connect to the new one.
What should I do if the speaker won't pair at all?
Restart Bluetooth on your device by turning it off and back on. If that doesn't work, press and hold both the power button and Bluetooth button on the speaker for ten seconds to reset it. Then try pairing again as if it were new.