The basic connection process
iHome speakers connect to your phone or device through Bluetooth, which means you turn on the speaker, put your phone in pairing mode, and select the iHome from your phone's Bluetooth list. The whole process takes about two minutes the first time. After that, your phone remembers the speaker and connects automatically when both are turned on and in range.
The exact steps depend slightly on whether you have an iPhone, Android phone, or tablet, but the principle is the same for all of them. Most iHome speakers also have a physical power button and a Bluetooth button on the top or back — you'll press the Bluetooth button to make the speaker discoverable, then complete the pairing on your phone.
Some iHome models also support connection through the iHome+ app, which gives you extra features like scheduling, alarm settings, and volume control from your phone. The app is optional — you can use the speaker without it — but it's worth downloading if you plan to use the speaker as an alarm clock or want remote control.
Key Takeaways
- Turn on the iHome speaker and press its Bluetooth button to make it discoverable, then select it from your phone's Bluetooth settings.
- After the first connection, your phone will reconnect automatically whenever both devices are powered on and within range.
- The iHome+ app is optional but adds features like alarms, scheduling, and remote volume control if your model supports it.
- If the speaker won't connect, restart both the speaker and your phone, then try pairing again from your phone's Bluetooth menu.
- iHome speakers work with any phone or tablet that has Bluetooth, including iPhones, Android devices, and tablets.
Connecting an iHome speaker for the first time
Start by plugging in the iHome speaker and turning it on. Look for the power button — it's usually on the back or bottom of the speaker. You should see a light turn on, often blue or white. Wait about 10 seconds for the speaker to fully boot up.
Next, locate the Bluetooth button on the speaker. On most iHome models, it's a small button labeled with a Bluetooth symbol (two triangles pointing at each other). Press and hold this button for about 2 to 3 seconds until you see the light flash or hear a tone. This puts the speaker into pairing mode, which means it's ready to be discovered by your phone.
On your phone, open the Bluetooth settings. On an iPhone, go to Settings > Bluetooth and turn Bluetooth on. On an Android phone, go to Settings > Connected Devices > Bluetooth (or Settings > Bluetooth, depending on your version). Your iHome speaker should appear in the list of available devices within 10 to 15 seconds. Tap or click on it to connect.
Your phone may ask you to confirm the pairing. If it does, tap "Pair" or "Connect." Once connected, you should see the iHome listed under "My Devices" or "Connected Devices" in your Bluetooth settings, and the speaker's light will usually stop flashing and stay solid.
Reconnecting after the first time
After you've paired your phone with the iHome speaker once, your phone stores that connection. The next time you turn on both devices, they'll find each other automatically — you don't need to go through the pairing process again. Just make sure Bluetooth is turned on in your phone's settings.
If your phone doesn't reconnect automatically, turn the speaker off and back on, then wait a few seconds. If that doesn't work, go to your phone's Bluetooth settings, find the iHome in the list, and tap it to connect manually. You should only need to do the full pairing process once, unless you reset the speaker or pair it with a different device.
Using the iHome+ app for extra features
If your iHome model supports it, you can read the iHome+ app from the Apple App Store or Google Play Store. The app lets you control the speaker from your phone even when you're not right next to it, set alarms, schedule when the speaker turns on and off, and adjust bass and treble settings.
To use the app, read it, create an account, and follow the setup instructions. The app will guide you through connecting to your speaker over your home Wi-Fi network (not just Bluetooth). This is different from the Bluetooth connection — it means the speaker needs to be connected to your Wi-Fi router. Once set up, you can control the speaker from anywhere in your home, or even outside if your router supports it.
The app is not required to use the speaker. You can play music through Bluetooth without ever opening the app. But if you want to use the iHome as an alarm clock or set up automatic on and off times, the app is the easiest way to do it.
Troubleshooting connection problems
If your iHome speaker won't show up in your phone's Bluetooth list, first make sure the speaker is turned on and the Bluetooth button has been pressed. The speaker should be within 30 feet of your phone. If it's too far away or there are thick walls between them, the connection may not work.
If the speaker still doesn't appear, restart both devices. Turn off the speaker completely, wait 10 seconds, and turn it back on. Then restart your phone. After both devices have restarted, try the pairing process again. This fixes most connection problems.
If you've paired the speaker with multiple phones or devices, it may be trying to connect to a different device. Check your other phones and tablets to see if Bluetooth is turned on. If it is, turn it off on those devices, then try connecting with the phone you want to use. You can pair an iHome with multiple devices, but it can only be connected to one at a time.
If the speaker connects but the sound is very quiet, check the volume on both the speaker itself (usually a dial or buttons on the back) and on your phone. Also check that your phone isn't in silent mode. If you're using the iHome+ app, the app has its own volume control that may be set low.
Connecting to different types of devices
iHome speakers work with iPhones, Android phones, iPads, Android tablets, and some computers. The pairing process is the same regardless of what device you're using — press the Bluetooth button on the speaker, then select it from your device's Bluetooth settings.
If you want to switch which device the speaker is playing from, pause or stop the music on the first device, then start playing on the second device. The speaker will switch to the new source automatically. You don't need to unpair or re-pair anything.
Some iHome models also have an auxiliary input (a 3.5mm jack) or USB input on the back. This means you can plug in a device with a cable instead of using Bluetooth. This is useful if your device's Bluetooth battery is low or if you want a more stable connection for a device that doesn't have Bluetooth.
Frequently Asked Questions
Why does my iHome speaker keep disconnecting from my phone?
This usually happens if your phone's Bluetooth is turning off automatically, if the speaker is too far from your phone, or if another device is trying to connect to the speaker at the same time. Try moving closer to the speaker, turning off Bluetooth on other devices, and checking your phone's Bluetooth settings to see if there's an auto-off timer enabled. If the problem continues, restart both devices and try pairing again.
Can I connect my iHome speaker to multiple phones at once?
You can pair an iHome with multiple phones, but only one phone can play audio through it at a time. If two phones try to play at the same time, the speaker will play whichever one connected most recently. To switch between phones, pause the music on the first phone and start playing on the second.
Do I need Wi-Fi to use my iHome speaker?
No. Bluetooth connection works without Wi-Fi. You only need Wi-Fi if you want to use the iHome+ app to control the speaker remotely or set up alarms and scheduling. For basic music playback, Bluetooth is all you need.
What if my iHome speaker is too old to support Bluetooth?
Older iHome models may only have an auxiliary input (a 3.5mm headphone jack). If yours doesn't have Bluetooth, you can connect your phone with a cable instead. Plug a 3.5mm audio cable into your phone's headphone jack (or use an adapter if your phone doesn't have one) and plug the other end into the iHome's auxiliary input.
How far away can my phone be from the iHome speaker?
Bluetooth typically works within 30 feet in open space. Walls, metal objects, and other electronics can reduce this range. If your phone is in another room with thick walls between it and the speaker, the connection may drop. If you need to control the speaker from far away, use the iHome+ app with Wi-Fi instead of Bluetooth.