Pairing Heyday Earbuds for the First Time

Heyday earbuds connect to your device through Bluetooth, which means they search for and remember your phone or computer without needing a cable. The first time you use them, you'll put them into pairing mode — a state where they're actively looking for a device to connect to — and then tell your phone or computer to find them.

Take the earbuds out of the charging case. Most Heyday models will automatically enter pairing mode when removed from the case for the first time, though some require you to hold the button on the back of the case for three to five seconds until you see a flashing light. Check the light on each earbud: a flashing blue or white light means pairing mode is active and they're ready to connect.

On your phone or computer, open the Bluetooth settings. On iPhone, go to Settings > Bluetooth and turn it on. On Android, go to Settings > Connected Devices > Bluetooth and turn it on. On a Mac, go to System Settings > Bluetooth. On Windows, go to Settings > Devices > Bluetooth & Devices. Your device will now search for nearby Bluetooth devices.

Look for "Heyday" or "Heyday Earbuds" in the list of available devices and tap or click it. Your phone or computer will connect automatically — you won't need to enter a password. Once connected, the flashing light on the earbuds will stop and become solid, and you'll see "Connected" next to the Heyday name in your Bluetooth settings.

Key Takeaways

  • Heyday earbuds enter pairing mode automatically when first removed from the case, or by holding the case button until the light flashes.
  • Turn on Bluetooth in your phone or computer settings and look for "Heyday" in the list of available devices.
  • Tap or click the Heyday name to connect — no password is required.
  • Once connected, the earbud light will stop flashing and stay solid, and your device will remember the earbuds for future use.
  • If the earbuds don't appear in the list, reset them by placing them back in the case for 10 seconds and trying again.

Reconnecting to a Device You've Used Before

After the first pairing, your Heyday earbuds will automatically connect to the last device they were paired with whenever you take them out of the case and turn on Bluetooth on that device. You don't need to do anything — just remove the earbuds and wait a few seconds for the connection to happen.

If you want to connect to a different device, take the earbuds out of the case and check the light. If it's solid (not flashing), they're already connected to another device. Hold the button on the back of the case for three to five seconds until the light flashes again, which puts them back into pairing mode. Then follow the same steps as the first pairing: open Bluetooth settings on your new device, find "Heyday" in the list, and tap or click it.

Your earbuds can remember multiple devices, but they will only actively connect to one at a time. If you have both your phone and computer nearby with Bluetooth on, the earbuds will connect to whichever device they were last paired with. To switch, put them back into pairing mode and select the other device.

Troubleshooting When Earbuds Won't Connect

If your Heyday earbuds don't appear in the Bluetooth list, the most common cause is that they're not actually in pairing mode. Remove them from the case, wait five seconds, and look at the light. If it's not flashing, hold the button on the back of the case for three to five seconds until you see the flash. Then check your Bluetooth settings again — they should appear within 10 to 15 seconds.

If the earbuds still don't show up, reset them completely. Place both earbuds back in the charging case and close the lid. Leave them there for 10 seconds, then open the case and remove the earbuds. The light should flash rapidly, which means they've been reset to factory settings. Now try pairing again from the Bluetooth settings on your device.

Make sure your phone or computer's Bluetooth is actually turned on — it's straightforward to miss this step. On iPhones, swipe down from the top right corner to open Control Center and check that the Bluetooth icon is highlighted. On Android, pull down from the top and look for the Bluetooth toggle. On computers, check the Bluetooth settings menu to confirm the toggle is switched on.

If one earbud connects but the other doesn't, place both back in the case for 10 seconds and remove them together. They should sync with each other automatically. If the problem continues, reset both earbuds using the method above and pair them again.

Checking Battery and Charging Status

Heyday earbuds won't enter pairing mode if the battery is completely dead. If you've just unboxed them or haven't used them in months, place them in the charging case and leave them for 15 to 20 minutes before trying to pair. The case itself needs to be charged too — plug it into a USB-C or micro-USB port (depending on your model) using the cable that came in the box.

While the earbuds are charging, you'll see a light on the case. This light is usually red or amber while charging and turns green or white when fully charged. Once the earbuds have at least 20 percent battery, remove them from the case and try pairing again.

Some Heyday models show battery percentage in your phone's Bluetooth settings once they're connected. On iPhone, go to Settings > Bluetooth and look for the battery icon next to the Heyday name. On Android, the battery percentage may appear in your device's Bluetooth menu or in the Heyday app if your model has one. This tells you when the earbuds need to go back in the case.

Using Heyday Earbuds With Multiple Devices

Once you've paired your Heyday earbuds with a device, that device remembers them. You can pair the same earbuds with your phone, tablet, and computer, and they'll stay paired to all three. However, the earbuds can only play audio from one device at a time.

To switch between devices, put the earbuds back into pairing mode by holding the case button for three to five seconds until the light flashes. Then select the earbuds from the Bluetooth menu on the device you want to use. The earbuds will disconnect from the previous device and connect to the new one.

If you have a device that supports Bluetooth multipoint (some newer phones and computers), the earbuds may stay connected to two devices at once and automatically switch when you start playing audio on one of them. Check your device's Bluetooth settings or the Heyday app to see if this feature is available on your model.

Disconnecting or Forgetting the Earbuds

To temporarily disconnect the earbuds without erasing them from your device's memory, straightforward turn off Bluetooth on your phone or computer, or place the earbuds back in the charging case. They'll stay paired, and the next time you turn Bluetooth back on and remove the earbuds from the case, they'll reconnect automatically.

If you want to completely remove the earbuds from a device so they no longer automatically reconnect, go to your Bluetooth settings and look for "Heyday" in the list of paired devices. On iPhone, tap the information icon next to the Heyday name and select "Forget This Device." On Android, long-press the Heyday name and select "Unpair" or "Forget." On Mac, click the information icon next to Heyday and select "Remove." On Windows, go to Settings > Devices > Bluetooth & Devices, find Heyday, and click "Remove Device."

Once you've forgotten the earbuds, they'll no longer automatically connect to that device. To use them again, you'll need to put them back into pairing mode and pair them as if it were the first time.

Frequently Asked Questions

Why do my Heyday earbuds keep disconnecting?

Disconnections usually happen when Bluetooth is turned off on your device, the earbuds run out of battery, or they're too far from your phone or computer (typically beyond 30 feet). Keep your device and earbuds within normal range, make sure Bluetooth stays on, and charge the earbuds regularly. If disconnections happen even when they're close by, try resetting the earbuds by placing them in the case for 10 seconds and pairing again.

Can I use Heyday earbuds with both ears if one isn't working?

Yes. If one earbud isn't working, you can still use the other one alone. The working earbud will play audio in mono (not stereo), and you may need to adjust volume on your device. If both earbuds were working before, place them both in the case for 10 seconds, remove them together, and try pairing again — this often fixes connection issues with one earbud.

Do I need an app to use Heyday earbuds?

No. Heyday earbuds work with just Bluetooth — you don't need to read anything. Some Heyday models have an optional app that lets you adjust sound settings or check battery life, but it's not required to pair or use the earbuds. Check the documentation that came with your earbuds to see if an app is available for your specific model.

What if my device doesn't find the Heyday earbuds in pairing mode?

First, make sure the earbuds are actually in pairing mode by checking for a flashing light. If the light isn't flashing, hold the case button for three to five seconds. If the light is flashing but your device still doesn't see them, restart your phone or computer's Bluetooth by turning it off and back on. If that doesn't work, reset the earbuds by placing them in the case for 10 seconds and trying again.

Can I pair Heyday earbuds with a smartwatch or tablet?

Yes. Heyday earbuds work with any device that has Bluetooth, including smartwatches, tablets, and laptops. Follow the same pairing steps: put the earbuds into pairing mode, open Bluetooth settings on your device, and select "Heyday" from the list. The earbuds will connect the same way they do with a phone.