Wired headphones plug in; wireless ones pair first

Wired headphones connect through a cable with a plug on the end. You push that plug into the headphone jack on your device — usually a small round hole on the bottom, side, or back. The connection is when ready; no setup needed. Wireless headphones use Bluetooth, a short-range radio signal. Before you can use them, you must pair them once, which means telling your device and headphones to recognize each other. After that first pairing, they reconnect automatically when you turn them on.

The method you use depends on what your device has and what your headphones are. Some devices no longer have a headphone jack, so wired headphones need an adapter. Some headphones work both ways. This guide covers the most common scenarios: wired headphones with and without an adapter, and Bluetooth wireless headphones on phones, tablets, and computers.

Key Takeaways

  • Wired headphones plug directly into a headphone jack; wireless headphones must be paired through Bluetooth before first use.
  • If your device has no headphone jack, you can use a USB-C or Lightning adapter to connect wired headphones.
  • To pair Bluetooth headphones, turn on the headphones, put them in pairing mode, then search for them in your device's Bluetooth settings.
  • After the first pairing, Bluetooth headphones reconnect automatically when you turn them on and your device is nearby.
  • If headphones do not connect, restart both the headphones and your device, then try pairing again.

Connecting wired headphones with a headphone jack

Look for a small round hole on your device. On phones and tablets, this is usually on the bottom edge. On laptops, it may be on the side. The hole is often marked with a headphone symbol — a small picture of an ear with a plug.

Take the plug end of your headphone cable — the part that is not attached to the ear cups — and push it straight into the hole until it stops. You will feel a slight resistance, then a click as it seats fully. Do not force it; if it does not slide in smoothly, you may have the wrong angle or the wrong port.

Once plugged in, sound should route to the headphones when ready. If you hear nothing, check your device's volume. On most phones and tablets, use the physical volume buttons on the side. On computers, look for a volume icon in the system tray (bottom right on Windows, top right on Mac) or in the settings menu.

Connecting wired headphones with an adapter

Many newer phones and tablets have no headphone jack. If your device has a USB-C port or a Lightning port (the small rectangular connector on iPhones and iPads), you can use an adapter to connect wired headphones.

Buy an adapter that matches your device's port. A USB-C adapter works with most Android phones and newer tablets. A Lightning adapter works with iPhones and iPads. These adapters are small, inexpensive, and widely available. Plug the adapter into your device's charging port, then plug your headphone cable into the adapter.

Some adapters also have a charging port, so you can charge your device while using headphones. Check the adapter's instructions to see if it supports this. Once connected, sound routes to the headphones the same way as with a direct jack connection.

Pairing Bluetooth headphones on a phone or tablet

Bluetooth headphones must be paired before they work. This is a one-time setup. After pairing, they connect automatically whenever you turn them on.

First, turn on your headphones. Most wireless headphones have a power button on one ear cup or on the charging case. Hold the button for a few seconds until you see a light flash or hear a sound. The light usually blinks blue or red, which means the headphones are in pairing mode — ready to be discovered by your device.

On your phone or tablet, open Settings. Look for a section called Bluetooth, Connections, or Wireless. Tap Bluetooth to turn it on if it is not already on. Your device will scan for nearby Bluetooth devices. When your headphones appear in the list, tap their name. Your device will ask you to confirm the pairing. Tap Confirm or Pair. The headphones should now show as Connected.

If the headphones do not appear in the list, make sure they are in pairing mode. Some headphones stay in pairing mode for only a few minutes, so you may need to restart the process. If you still have trouble, restart both the headphones and your phone, then try again.

Pairing Bluetooth headphones on a computer

The process is similar on Windows and Mac, but the menu locations differ slightly.

On Windows: Turn on your headphones and put them in pairing mode. Click the Start button, then go to Settings. Select Devices, then Bluetooth. Toggle Bluetooth on if it is off. Click Add Device. Your computer will scan for Bluetooth devices. When your headphones appear, click them to pair.

On Mac: Turn on your headphones and put them in pairing mode. Click the Apple menu in the top left, then System Settings. Select Bluetooth. Your Mac will scan for devices. When your headphones appear in the list, click the Connect button next to them. You may see a pairing code; if so, confirm it on both your Mac and your headphones.

After pairing, your headphones will appear in the Bluetooth menu as Connected. They will reconnect automatically the next time you turn them on, as long as Bluetooth is enabled on your computer.

Switching audio between headphones and speakers

Once headphones are connected, your device usually sends all sound to them automatically. If you want to switch back to speakers, you need to either disconnect the headphones or change the audio output in your device's settings.

For wired headphones, straightforward unplug them. Sound will return to your device's speakers. For Bluetooth headphones, you can turn them off, or go to your Bluetooth settings and tap Disconnect next to their name. Some devices also have a quick audio menu: on phones, swipe down from the top to see connected devices and tap the headphones icon to switch output.

On computers, right-click the volume icon in the system tray (Windows) or click the volume icon in the menu bar (Mac). You will see a list of audio outputs. Select Speakers to route sound back to your device, or select your headphones to switch back to them.

Troubleshooting when headphones will not connect

If your headphones do not connect or disconnect unexpectedly, try these steps in order.

For wired headphones: Unplug and plug them back in. If you are using an adapter, make sure it is fully inserted into the port. Try a different USB-C or Lightning adapter if you have one; adapters can fail. If you hear crackling or only one side works, the cable may be damaged. Test with a different pair of headphones if possible.

For Bluetooth headphones: Turn off the headphones completely, wait 10 seconds, then turn them back on. Put them in pairing mode again. On your device, go to Bluetooth settings and look for your headphones in the list. If they appear, tap Forget or Remove, then pair them again from scratch. If they still do not appear, restart your device's Bluetooth by toggling it off and on in settings. If the headphones still will not connect after a full restart of both devices, the headphones may need to be reset to factory settings; check the manufacturer's instructions for how to do this.

Frequently Asked Questions

Do I need to pair wired headphones?

No. Wired headphones work when ready when you plug them in. There is no pairing step. Pairing is only for Bluetooth wireless headphones.

Can I use Bluetooth headphones and wired headphones at the same time?

Most devices will play sound through only one at a time. If you have both connected, your device chooses one as the active output. You can switch between them in your audio settings, but you cannot split the sound between them without special software.

Why do my Bluetooth headphones keep disconnecting?

Bluetooth has a range of about 30 feet. If you move too far from your device, the connection drops. Interference from other wireless devices, like microwaves or Wi-Fi routers, can also cause disconnections. Try moving closer to your device or away from other wireless equipment. If disconnections happen even when you are close, restart both the headphones and your device.

What if my device does not have Bluetooth?

Older computers and some budget devices may not have built-in Bluetooth. You can add it with a USB Bluetooth adapter, which plugs into a USB port and lets your device discover and pair with Bluetooth headphones. These adapters are inexpensive and work on Windows and Mac.

Can I connect the same headphones to multiple devices?

Yes. Once you pair Bluetooth headphones with one device, you can pair them with another device using the same process. However, most headphones can only connect to one device at a time. To switch, disconnect from the first device and connect to the second, or put the headphones in pairing mode again.