The basic connection process

A DJI Mic connects to your MacBook through a USB-C receiver dongle that comes in the box. Plug the receiver into any USB-C port on your Mac, wait for it to appear in System Settings, and the mic is ready to use. The whole process takes about two minutes and requires no pairing codes or apps — your Mac recognizes it as a standard audio input device.

The DJI Mic system includes a transmitter (the handheld mic), a receiver (the small dongle), and a charging case. Only the receiver connects to your Mac. The transmitter pairs to the receiver wirelessly during setup, and that pairing stays locked even if you unplug and replug the receiver later.

Key Takeaways

  • Insert the USB-C receiver into any USB-C port on your MacBook and your Mac will recognize it as an audio input device without installing software.
  • The DJI Mic transmitter pairs to the receiver during first use, and you do not need to pair it again each time you connect to your Mac.
  • You must manually select the DJI Mic as your input device in System Settings or in individual apps before recording or streaming.
  • The receiver draws power from your Mac's USB port, so the mic will stop working if you unplug it or if your Mac goes to sleep.

What you need before you start

You need the DJI Mic receiver dongle, which is the small rectangular device that came in your box. You also need a USB-C port on your MacBook — all current MacBooks have at least two. If your Mac is older and has only USB-A ports, you will need a USB-C to USB-A adapter, though this is not ideal because it may reduce power delivery to the receiver.

Make sure your DJI Mic transmitter has a charge. The transmitter does not need to be plugged in to pair with the receiver, but it must be powered on. Check the LED light on the transmitter — a solid light means it is ready, and a blinking light means the battery is low.

Step-by-step connection

Step 1: Plug in the receiver. Take the USB-C receiver and insert it into any available USB-C port on your MacBook. You will see a small LED light on the receiver turn on. Your Mac may show a notification that a new device has been detected, but you do not need to do anything with that notification.

Step 2: Turn on the transmitter. Press and hold the power button on the DJI Mic transmitter for two seconds until the LED light turns solid. The transmitter will automatically search for the receiver. This usually takes five to ten seconds. When the pairing is complete, both the transmitter and receiver LEDs will stop blinking and stay solid.

Step 3: Set the DJI Mic as your input device. Open System Settings on your Mac. Click Sound in the left sidebar, then click Input. You should see "DJI Mic Receiver" in the list of input devices. Click it to select it. Your Mac will remember this choice the next time you plug in the receiver.

Step 4: Test the audio. Speak into the transmitter microphone and watch the input level meter in System Settings. You should see the bars move as you speak. If the bars do not move, unplug the receiver, wait five seconds, and plug it back in.

Troubleshooting when the mic does not appear

If the DJI Mic Receiver does not show up in your Sound input list, first check that the receiver LED is on. If it is off, try a different USB-C port — some ports on your Mac may be reserved for other functions. If you are using an adapter, try connecting directly to a USB-C port instead.

If the receiver LED is on but still does not appear in System Settings, restart your Mac. Shut down completely, wait ten seconds, and turn it back on. Plug the receiver in after your Mac has fully booted. If it still does not appear after restart, the receiver may need a firmware update, which you can do through the DJI Mimo app on your Mac (available free from the App Store).

If the transmitter and receiver are not pairing (the LEDs keep blinking instead of staying solid), make sure both devices have charge. Hold the power button on the transmitter for five seconds to force a restart, then try pairing again.

Using the mic with specific apps

Once you have set the DJI Mic as your default input in System Settings, most apps will use it automatically — including Zoom, Google Meet, Skype, and QuickTime. However, some apps let you choose your input device separately. If you are recording a video in Final Cut Pro or Adobe Premiere, open the app's audio settings and select DJI Mic Receiver from the input dropdown.

If you switch between the DJI Mic and your Mac's built-in microphone often, you can change your default input device quickly by holding Option and clicking the volume icon in the menu bar, then selecting Sound. This is faster than opening System Settings each time.

Power and sleep mode behavior

The DJI Mic receiver draws power from your Mac's USB port, so it will stop working if you unplug it or if your Mac enters sleep mode. If your Mac goes to sleep during a recording or call, the receiver will disconnect and you will need to plug it back in and select it as your input device again.

To prevent this during long recordings or calls, go to System Settings, click General, then Energy Saver. Set "Turn display off after" to a longer time, or disable sleep entirely while you are using the mic. Remember to turn sleep back on when you are done, as leaving it disabled will drain your battery faster.

Frequently Asked Questions

Do I need to read software to use the DJI Mic with my MacBook?

No. Your Mac recognizes the receiver as a standard USB audio device and works when ready. The DJI Mimo app is optional and only needed if you want to update the receiver's firmware or adjust advanced settings like wireless range or audio levels.

Can I use the DJI Mic on multiple Macs?

Yes. The receiver will work on any Mac with a USB-C port. The transmitter stays paired to the receiver, so you can unplug the receiver from one Mac and plug it into another without re-pairing. Just select the DJI Mic as your input device on the new Mac.

What if my MacBook only has USB-A ports?

You will need a USB-C to USB-A adapter. However, older adapters may not provide enough power to the receiver, which can cause the LED to flicker or the connection to drop. Use an adapter rated for at least 5V/2A power delivery if possible.

Why does the audio cut out when my Mac goes to sleep?

The receiver loses power when your Mac sleeps because it draws power from the USB port. Adjust your Mac's sleep settings to keep the display on longer, or manually prevent sleep by going to System Settings > General > Energy Saver and extending the timeout.

Can I use the DJI Mic wirelessly without the receiver plugged into my Mac?

No. The receiver must be physically connected to your Mac via USB-C for the audio to reach your computer. The wireless connection is only between the transmitter and receiver, not between the receiver and your Mac.