The basic steps work the same way on almost every device
Connecting Bluetooth headphones means putting your headphones and your device (phone, computer, or tablet) into a mode where they can find each other, then telling them to stay connected. The process takes about two minutes the first time, and after that your headphones will usually reconnect automatically when you turn them on near the device.
The core steps are: turn on your headphones, put them in pairing mode, open your device's Bluetooth settings, find the headphones in the list, and tap to connect. After that first connection, you typically just turn the headphones on and they reconnect on their own.
Key Takeaways
- Most Bluetooth headphones enter pairing mode by holding down a button for 3 to 5 seconds until a light blinks — check your headphones' manual for the exact button and timing.
- On phones and tablets, Bluetooth settings are usually in the main Settings app under "Bluetooth" or "Connected Devices"; on computers, look in System Settings or Control Panel.
- Once you pair headphones to a device for the first time, they will usually reconnect automatically the next time you turn them on nearby.
- If headphones won't connect, restart both the headphones and the device, then try pairing again from scratch.
- Most headphones can pair with multiple devices but only connect to one at a time — you may need to manually switch which device they are connected to.
How to put your Bluetooth headphones into pairing mode
Pairing mode is the state where your headphones broadcast their presence so your device can find them. Most headphones enter pairing mode by holding down a button — usually the power button or a dedicated Bluetooth button — for 3 to 5 seconds. Look for a light that blinks in a specific pattern (often blue and red alternating, or a steady blue) to confirm pairing mode is active.
The exact button and timing varies by brand and model. Check the manual that came with your headphones, or look up your specific model online if you no longer have the manual. Some headphones have a printed guide on the back or inside the battery compartment. If your headphones are brand new, they may already be in pairing mode when you first turn them on.
Leave your headphones in pairing mode while you go to your device's Bluetooth settings. Most headphones stay in pairing mode for 2 to 5 minutes, so you have time to navigate to the right menu.
Connecting on an iPhone or iPad
Open the Settings app and tap "Bluetooth". Make sure Bluetooth is turned on — you should see a toggle at the top that is blue or green. Your headphones should appear in the list under "Other Devices" or "Available Devices" within a few seconds.
Tap the name of your headphones. Your device will show "Connecting" for a moment, then the headphones name will move to a section labeled "My Devices" or "Connected" with the word "Connected" next to it. A checkmark may also appear. This means the pairing is complete.
From now on, when you turn on your headphones near your iPhone or iPad, they should reconnect automatically. You can check the connection status by opening Bluetooth settings again — your headphones should show as "Connected" within a few seconds of turning them on.
Connecting on an Android phone or tablet
Open the Settings app. Look for "Bluetooth" or "Connected Devices" — the exact name depends on your phone's manufacturer and Android version. Tap it, then make sure Bluetooth is turned on. You should see a toggle or switch at the top of the screen.
Tap "Pair New Device" or "Add Device" or "Available Devices" — again, the exact wording varies. Your headphones should appear in the list within a few seconds. Tap the name of your headphones, and your phone will show "Pairing" or "Connecting" for a moment.
Once the connection is complete, your headphones name will show as "Connected" in the Bluetooth menu. On future uses, turn on your headphones and they should reconnect automatically.
Connecting on a Windows computer
Click the Windows Start button and open Settings. Go to "Devices" or "Bluetooth & Devices" (the exact name depends on your Windows version). Make sure Bluetooth is turned on — you should see a toggle switch.
Click "Add Device" or "Pair New Device". A window will open showing available Bluetooth devices. Your headphones should appear in the list within a few seconds. Click on them, and Windows will show "Pairing" for a moment, then "Connected".
Your headphones should reconnect automatically the next time you turn them on and use your computer. If they do not reconnect, you can manually reconnect by going back to Bluetooth settings and clicking your headphones name.
Connecting on a Mac
Click the Apple menu and open System Settings (or System Preferences on older Macs). Go to "Bluetooth". Make sure Bluetooth is turned on — you should see a toggle at the top.
Your headphones should appear in the list of available devices within a few seconds of entering pairing mode. Click "Connect" next to your headphones name. The status will change to "Connected" once the pairing is complete.
On future uses, your headphones should reconnect automatically when you turn them on near your Mac. You can check the connection status by opening Bluetooth settings again.
What to do if your headphones won't connect
If your headphones do not appear in the device's Bluetooth list, or if they appear but will not connect, restart both the headphones and the device. Turn off your headphones completely, wait 10 seconds, and turn them back on. Then restart your phone, computer, or tablet by powering it off and back on.
After both devices have restarted, put your headphones back into pairing mode and try connecting again. This fixes most connection problems because it clears out temporary settings that may have gotten stuck.
If the headphones still will not connect, check whether they are already connected to a different device. Most Bluetooth headphones can pair with multiple devices but only connect to one at a time. If your headphones are currently connected to your laptop, they may not connect to your phone until you disconnect them from the laptop first. Go to the Bluetooth settings on the device your headphones are currently connected to and select "Forget" or "Unpair", then try connecting to your new device.
Managing multiple devices and switching connections
Once you have paired your headphones to a device, they remember that pairing. You can pair the same headphones to your phone, tablet, and computer all at once. However, your headphones can only play audio from one device at a time.
When you turn on your headphones, they will usually reconnect to whichever device they were last connected to. If you want to switch to a different device, go to the Bluetooth settings on that device and tap or click your headphones name to connect. The headphones will disconnect from the previous device and connect to the new one.
Some headphones have a button you can press to cycle through paired devices without opening settings. Check your headphones manual to see if yours has this feature.
Frequently Asked Questions
Why do my headphones keep disconnecting?
Disconnections usually happen when your headphones are too far from your device (more than 30 feet in most cases), when the battery is low, or when another wireless device is interfering. Move closer to your device, charge your headphones, and try turning off nearby WiFi routers or microwaves temporarily to see if interference is the cause. If disconnections continue, restart both devices and repair them from scratch.
Can I use the same headphones with multiple devices at the same time?
No. Bluetooth headphones can be paired to multiple devices, but they only play audio from one device at a time. You can switch which device they are connected to by going to that device's Bluetooth settings and tapping the headphones name, but you cannot listen to two devices simultaneously.
Do I have to pair my headphones every time I use them?
No. After the first pairing, your headphones should reconnect automatically when you turn them on near the device. Pairing only needs to happen once per device. If your headphones do not reconnect automatically, check that Bluetooth is turned on in your device's settings.
What if I lost the manual and don't know how to put my headphones in pairing mode?
Search online for your headphones brand and model name plus "pairing mode" or "how to pair". Most manufacturers have instructions on their website or YouTube. Common methods are holding the power button for 3 to 5 seconds, or holding a dedicated Bluetooth button. If your headphones are brand new, try turning them on — many enter pairing mode automatically the first time.
Why won't my headphones show up in my device's Bluetooth list?
Make sure your headphones are in pairing mode and fully charged. Check that Bluetooth is turned on in your device's settings. If the headphones still do not appear, restart both the headphones and the device, then try pairing again. If they are already paired to another device, disconnect them from that device first.