Roku TVs can connect to Bluetooth headphones, but the process depends on your TV model and headphone type
Not all Roku TVs support Bluetooth headphones the same way. Newer Roku models (2016 and later) have built-in Bluetooth, but older models do not. Even on newer TVs, Roku limits Bluetooth to certain headphone types — some wireless headphones will not pair at all, and some will pair but lose connection unpredictably. Before you start, check your TV's model year and manual to confirm it has Bluetooth capability. You can find your model number in Settings > System > About on your Roku remote.
The pairing process itself is straightforward: put your headphones in pairing mode, then search for them in your Roku's Bluetooth menu. The real challenge comes after pairing — managing audio routing, dealing with connection drops, and understanding why some headphones work better than others on Roku's system.
Key Takeaways
- Roku TVs made in 2016 or later have Bluetooth built in, but you must enable it manually in the TV's audio settings before pairing.
- Not all Bluetooth headphones work reliably with Roku — the TV supports only certain audio codecs, so some headphones will pair but sound poor or disconnect frequently.
- Once paired, you must route audio to your headphones through the Roku remote's audio menu each time you use them, because the TV defaults to speakers.
- If your TV has no Bluetooth or your headphones will not pair, a Bluetooth adapter plugged into the TV's audio jack or HDMI port is a working alternative.
Check whether your Roku TV actually has Bluetooth
Roku did not add Bluetooth to all of its TV models at the same time. Most Roku TVs made from 2016 onward have it, but some 2015 models and all earlier models do not. The only way to know for certain is to look at your TV's model number and check Roku's support pages, or try to enable Bluetooth in your settings and see if the option appears.
To find your model number, pick up your Roku remote and press the Home button. Go to Settings > System > About. Write down the model number (it looks like 4802, 6000, 8000, or similar). Then visit support.roku.com and search for your model number. The spec sheet will list "Bluetooth" under connectivity if your TV supports it. If Bluetooth is not listed, your TV does not have it built in, and you will need a separate adapter.
Enable Bluetooth on your Roku TV before pairing headphones
Bluetooth is often turned off by default on Roku TVs, even on models that have the hardware. You must turn it on before your headphones can find the TV. On your Roku remote, press Home, then go to Settings > System > Bluetooth. If you see a Bluetooth option, select it and turn it on. The TV will then search for nearby Bluetooth devices.
Some Roku models label this setting differently — it may appear under Settings > Audio or Settings > Remotes & Devices instead of System. If you cannot find a Bluetooth menu after checking all three locations, your TV does not have Bluetooth capability. Once Bluetooth is on, leave this menu open and prepare your headphones for pairing.
Put your headphones in pairing mode and connect them
Most Bluetooth headphones enter pairing mode by holding down the power button for 5 to 10 seconds until you see a flashing light (usually blue or white). Some headphones have a separate pairing button. Check your headphone manual if you are unsure — the pairing method varies widely by brand and model. Once the headphones are in pairing mode, the Roku TV should detect them within 10 to 15 seconds.
On the Roku screen, you should see a list of available Bluetooth devices. Select your headphones from the list. The TV will attempt to pair with them. If pairing succeeds, you will see a confirmation message and the headphones will appear in your list of paired devices. If pairing fails, try again — sometimes the first attempt times out. If it fails three times, restart both the TV and the headphones, then try once more.
Route audio to your headphones through the Roku remote
Pairing is only the first step. After your headphones are paired, the Roku TV still sends audio to your speakers by default. You must manually tell the TV to play sound through the headphones each time you use them. On your Roku remote, press the Home button, then go to Settings > Audio > Audio Output. You should see an option for your headphones listed by name. Select it, and audio will switch to the headphones.
This is different from how Bluetooth works on phones or computers, where audio automatically routes to headphones once they are connected. On Roku, you have to make the choice every time. If you forget to switch the audio output and the TV plays through speakers instead, go back to the same menu and select your headphones again.
Understand why some headphones disconnect or sound poor
Roku's Bluetooth implementation has real limits. The TV supports only certain audio codecs — the technical formats that encode sound. Most consumer headphones use the SBC codec, which Roku supports, but some use aptX, LDAC, or other newer codecs that Roku does not. If your headphones use an unsupported codec, they may pair but sound distorted, cut out frequently, or disconnect after a few minutes.
You cannot change which codec your headphones use — that is built into the hardware. If you experience frequent disconnects or poor sound quality, the problem is likely a codec mismatch. In that case, your headphones may work better with a separate Bluetooth adapter (see below) than with the TV's built-in Bluetooth. Headphones from major brands like Sony, Bose, and Sennheiser tend to work more reliably with Roku than budget models, though this is not may provide.
Use a Bluetooth adapter if your TV has no Bluetooth or pairing fails
If your Roku TV is older and has no Bluetooth, or if your headphones will not pair reliably with the TV's built-in Bluetooth, a separate Bluetooth adapter is a practical workaround. These are small devices that plug into your TV's audio jack or HDMI port and create their own Bluetooth connection. Popular options include the TaoTronics Bluetooth 5.0 Audio Adapter and the Mpowerd Bluetooth Receiver, both available online for $15 to $30.
To use an adapter, plug it into your TV's 3.5mm audio jack (the headphone port) or into an available HDMI port, depending on the adapter type. Put the adapter in pairing mode, then pair your headphones to the adapter instead of the TV. The adapter will then send audio from the TV to your headphones. This method works on any Roku TV, regardless of age or built-in Bluetooth capability, and often produces more stable connections than the TV's native Bluetooth.
Troubleshoot connection problems
If your headphones pair but then disconnect after a few minutes, move closer to the TV. Bluetooth has a typical range of 30 feet, but walls, metal objects, and other wireless devices (like Wi-Fi routers or cordless phones) can interfere. If moving closer helps, interference is the problem — try moving the TV or router, or use the adapter method instead.
If your headphones pair but produce no sound, check that you have selected them in Settings > Audio > Audio Output. If they are selected and still silent, restart the headphones by turning them off and on again, then select them in the audio menu once more. If the headphones still produce no sound after a restart, unpair them from the TV, restart the TV itself, and try pairing again from the beginning.
Frequently Asked Questions
Can I use multiple pairs of Bluetooth headphones at the same time on my Roku TV?
No. Roku TVs can pair with multiple headphones, but only one pair can receive audio at a time. You must manually switch between them in the audio output menu. If two people want to listen simultaneously, you need two separate Bluetooth adapters plugged into the TV, or one person uses headphones while the other uses the TV speakers.
Why do my headphones keep disconnecting from my Roku TV?
Disconnects usually happen because of codec incompatibility (your headphones use a format Roku does not support), interference from other wireless devices, or distance from the TV. Try moving closer to the TV first. If that does not help, check your headphone manual to see what codec it uses. If it is not SBC, consider using a Bluetooth adapter instead, which may handle the codec better.
Do I need to pair my headphones every time I turn on the TV?
No. Once paired, your headphones stay in the TV's memory. You only need to turn on the headphones and select them in Settings > Audio > Audio Output. You do not have to pair them again unless you unpair them manually or factory reset the TV.
What if my Roku TV is too old to have Bluetooth?
Buy a Bluetooth adapter that plugs into the TV's 3.5mm audio jack or HDMI port. Pair your headphones to the adapter instead of the TV. The adapter costs $15 to $30 and works with any TV model, old or new. This is often more reliable than using the TV's built-in Bluetooth anyway.
Can I use Bluetooth headphones with Roku if I also use a soundbar?
Yes, but only one audio output can be active at a time. If you select your headphones in the audio menu, the soundbar will not play. If you want both to work, you would need two separate Bluetooth adapters, one for the headphones and one for the soundbar, which is impractical. Most people choose either headphones or soundbar depending on the situation.