Beats Studio 3 connects via Bluetooth, and the first pairing takes about two minutes
The Beats Studio 3 are wireless headphones that use Bluetooth to connect to phones, tablets, computers, and other devices. The first time you pair them, you'll hold down a button until a light flashes, then select the headphones from your device's Bluetooth menu. After that, they'll reconnect automatically when you turn them on and your device is nearby. If you're switching between multiple devices — your phone and laptop, for example — you can pair the headphones to all of them, and they'll remember each one.
The headphones come with a USB-C charging cable and a 3.5mm audio cable if you want to use them wired instead. Most people use them wireless, but the wired option works if your battery dies or if you prefer a direct connection.
Key Takeaways
- Press and hold the power button for 5 seconds until the LED light flashes to enter pairing mode, then select the headphones from your device's Bluetooth settings.
- The headphones will automatically reconnect to the last device they were paired with when you turn them on, as long as Bluetooth is enabled.
- You can pair Beats Studio 3 to multiple devices at once, but they will only play audio from one device at a time.
- If pairing fails, forget the headphones from your device's Bluetooth menu and start the pairing process over from the beginning.
Pairing to an iPhone or iPad
Open the Settings app on your iPhone or iPad and tap Bluetooth. Make sure Bluetooth is turned on — the toggle should be blue. Pick up your Beats Studio 3 and press and hold the power button (on the left ear cup) for about 5 seconds. You'll see the LED light on the headphones flash red and blue, which means they're in pairing mode.
Look at your device's Bluetooth menu. The headphones should appear as "Beats Studio3" in the list of available devices. Tap that name. Your device will connect, and you'll hear a tone through the headphones. The LED light will stop flashing and turn solid, which means the pairing is complete. From now on, when you turn on the headphones and your iPhone or iPad is nearby with Bluetooth on, they'll connect automatically.
Pairing to an Android phone or tablet
The process is nearly identical to iPhone. Open Settings, find Bluetooth or Connected Devices (the exact name varies by phone), and turn Bluetooth on. Hold down the power button on the Beats Studio 3 for 5 seconds until the LED flashes red and blue. The headphones will appear in your device's list of available Bluetooth devices — tap the name to connect.
Some Android phones show a pairing code on the screen during connection. If yours does, you don't need to do anything — just wait for the connection to complete. Once paired, the headphones will reconnect automatically whenever you turn them on and Bluetooth is enabled on your phone.
Pairing to a Mac or Windows computer
On a Mac, click the Bluetooth icon in the top-right corner of the screen (or go to System Settings > Bluetooth). Make sure Bluetooth is on. Hold the power button on the Beats Studio 3 for 5 seconds until the LED flashes. The headphones will appear in the Bluetooth menu — click the name to pair.
On Windows 10 or 11, go to Settings > Bluetooth & Devices > Bluetooth. Turn Bluetooth on if it's off. Put the headphones in pairing mode by holding the power button for 5 seconds. Click "Add Device" or wait for the headphones to appear in the list, then click the name to connect. Windows will confirm when pairing is complete.
Switching between multiple paired devices
Once you've paired the Beats Studio 3 to more than one device, they'll remember all of them. When you turn on the headphones, they'll automatically connect to whichever device they were last used with. If you want to switch to a different device, turn off Bluetooth on the current device or move out of range, then turn Bluetooth on for the device you want to use. The headphones will connect to it within a few seconds.
You can also manually switch by opening the Bluetooth menu on your new device and selecting the headphones from the list. The headphones will disconnect from the old device and connect to the new one. Only one device can play audio through the headphones at a time, even if multiple devices are paired.
Reconnecting after the battery dies
If the battery in your Beats Studio 3 runs completely empty, they'll still remember all the devices you've paired them with. Charge the headphones using the USB-C cable for about 30 minutes. Once they have power, turn them on and they'll reconnect to your devices automatically, starting with the last one they were connected to.
If the headphones don't reconnect after charging, make sure Bluetooth is turned on for your device. If they still don't connect, hold the power button for 5 seconds to put them in pairing mode again, then select them from your device's Bluetooth menu.
Troubleshooting connection problems
If the headphones won't pair or keep disconnecting, the first step is to "forget" them from your device and start over. On iPhone or iPad, go to Settings > Bluetooth, find "Beats Studio3" in the list, tap the info icon next to it, and tap "Forget This Device." On Android, go to Settings > Connected Devices > Bluetooth, find the headphones, and tap "Forget" or "Unpair." On Mac, click the Bluetooth icon, find the headphones, and click the X next to the name. On Windows, go to Settings > Bluetooth & Devices, find the headphones, and click "Remove Device."
After you've forgotten the headphones, restart your device. Then put the Beats Studio 3 in pairing mode again by holding the power button for 5 seconds and pair them as if it's the first time. This clears out any corrupted connection data and usually solves the problem. If the headphones still won't connect after this, try charging them fully — a low battery can sometimes prevent pairing from working.
Using the headphones with a wired connection
The Beats Studio 3 come with a 3.5mm audio cable that lets you use them as wired headphones. Plug one end into the headphone jack on the bottom of the left ear cup and the other end into the audio jack on your device. The headphones will work when ready without any pairing or setup — the audio will play through the headphones instead of your device's speakers.
When you use the wired connection, the battery still drains slowly, so you can still use the headphones when the battery is dead by keeping them plugged in. The wired option is useful if you're in a place where Bluetooth isn't available or if you want to avoid draining the battery during a long listening session.
Frequently Asked Questions
Why won't my Beats Studio 3 show up in my Bluetooth menu?
Make sure the headphones are in pairing mode — hold the power button for 5 seconds until the LED flashes red and blue. If they still don't appear, restart your device and try again. If the LED doesn't flash at all, the battery may be too low, so charge the headphones for at least 15 minutes before trying again.
Can I use Beats Studio 3 with two devices at the same time?
No, the headphones can only play audio from one device at a time, even if they're paired to multiple devices. However, you can switch between devices by turning Bluetooth off on one and on for another, or by opening the Bluetooth menu and selecting a different device.
Do I have to pair my Beats Studio 3 every time I use them?
No. After the first pairing, the headphones will automatically reconnect to your device whenever you turn them on and Bluetooth is enabled. You only need to pair them once per device, and they'll remember the connection from then on.
What should I do if my headphones keep disconnecting?
First, make sure Bluetooth is turned on for your device and that you're within about 30 feet of it. If the problem continues, forget the headphones from your device's Bluetooth menu, restart your device, and pair them again. A full charge on the headphones can also help — low battery sometimes causes connection drops.
Can I use Beats Studio 3 if the battery is dead?
Yes, if you use the included 3.5mm audio cable. Plug the cable into the headphone jack on the bottom of the left ear cup and into your device's audio jack. The headphones will work wired even with no battery, though the battery will still drain slowly in the background.