Turn on Bluetooth and put your Beats in pairing mode
Open the Settings app on your iPhone and tap Bluetooth. Toggle Bluetooth on — the switch will turn green. Then pick up your Beats Solo 4 and press and hold the power button on the left ear cup for about 15 seconds until you see the LED light flash red and white. This flashing means the headphones are in pairing mode and searching for a device to connect to.
You will see "Beats Solo 4" appear in the list of available devices under "Other Devices" in your Bluetooth settings. Tap it once. Your iPhone will connect automatically — you should see a checkmark next to the name, and the LED on the headphones will turn solid blue.
Key Takeaways
- Turn on Bluetooth in Settings, then hold the power button on your Beats for 15 seconds until the light flashes red and white.
- Tap "Beats Solo 4" in your iPhone's Bluetooth list — the connection happens automatically once you select it.
- The headphones will remember your iPhone after the first connection, so you only need to turn them on and they will reconnect on their own.
- If the headphones do not appear in the Bluetooth list, restart them by holding the power button for 10 seconds, then try pairing again.
- You can connect the same Beats to multiple devices, but they will only play audio from one at a time.
What to do if the headphones do not show up
If you do not see "Beats Solo 4" in your Bluetooth list after 15 seconds, the headphones may not have entered pairing mode. Hold the power button again for a full 10 seconds — count slowly — and watch for the red and white flashing. Some people release too early and the headphones just turn on instead of entering pairing mode.
If the light is flashing but the headphones still do not appear, restart your iPhone's Bluetooth. Go back to Settings, toggle Bluetooth off, wait five seconds, then toggle it back on. This clears out any stuck connections. Then try the pairing process again from the beginning.
Reconnecting after the first time
After your first connection, your Beats Solo 4 will remember your iPhone. The next time you turn on the headphones, they will search for your iPhone automatically and reconnect within a few seconds. You do not need to go back into Bluetooth settings or hold any buttons.
If your Beats connect to a different device instead — like a laptop or tablet — you can force them back to your iPhone by opening Bluetooth settings and tapping "Beats Solo 4" again. The headphones will switch to your iPhone when ready.
Connecting to a second device
Your Beats Solo 4 can be paired to multiple devices at once, but they will only play audio from one at a time. To add a second device like an iPad or Mac, put the headphones back into pairing mode by holding the power button for 15 seconds on the flashing red and white light. Then go to Bluetooth settings on the second device and tap "Beats Solo 4" just like you did with your iPhone.
Once both devices are paired, whichever one you play audio from first will take control of the headphones. To switch, pause audio on the first device and start playing on the second. The headphones will switch over automatically.
Checking the battery and volume
Your iPhone will show the battery level of your Beats in the Bluetooth settings. Open Settings, tap Bluetooth, and look next to "Beats Solo 4" — you will see a percentage. If the battery is below 20 percent, charge the headphones using the USB-C cable that came in the box. Plug it into the port on the bottom of the left ear cup.
Control the volume using the buttons on your Beats, not just your iPhone volume. The volume rocker is on the right ear cup. You can also adjust volume in Control Center on your iPhone — swipe down from the top right corner and use the volume slider.
Disconnecting or forgetting the headphones
If you want to disconnect your Beats without forgetting them, just turn off the headphones. They will stay paired to your iPhone and reconnect the next time you turn them on. To completely forget the headphones — for example, if you are selling them or pairing them to a different iPhone — go to Settings, tap Bluetooth, find "Beats Solo 4" in the list, and tap the "i" icon next to it. Then tap "Forget This Device."
After you forget the headphones, they will no longer reconnect automatically. You will need to put them back into pairing mode and select them in Bluetooth settings again if you want to use them with that iPhone in the future.
Frequently Asked Questions
Why do my Beats keep disconnecting from my iPhone?
Disconnections usually happen when the headphones are too far from your iPhone — Bluetooth has a range of about 30 feet with a clear line of sight. Move closer to your phone. If that does not help, forget the headphones in Bluetooth settings and pair them again from scratch. Sometimes a fresh connection fixes random drops.
Can I use my Beats Solo 4 with multiple iPhones at the same time?
No. The headphones can be paired to multiple iPhones, but they will only play audio from one at a time. If two iPhones try to play audio simultaneously, the headphones will play from whichever one started first. You can switch by pausing one and playing on the other.
What if I forgot my Beats are connected and started playing audio on my iPhone speaker?
Your iPhone will play through the speaker by default if the Bluetooth headphones are not connected. Once you turn on your Beats and they reconnect, open Control Center and tap the audio output button — it looks like a speaker with sound waves. Select "Beats Solo 4" from the list to send audio to the headphones instead.
Do I need to unpair my Beats before connecting them to a different iPhone?
No. Your Beats can stay paired to your old iPhone while you pair them to a new one. Just put them into pairing mode on the new iPhone and select them in Bluetooth settings. The headphones will remember both devices and reconnect to whichever one you use them with next.