Pairing Beats Solo 4 to your phone or computer

Beats Solo 4 connect through Bluetooth, which means you turn them on, put your device in pairing mode, and select them from the list. The first time you connect them, the headphones enter pairing mode automatically when you power them on. After that, they reconnect to the last device you used them with whenever you turn them back on.

To pair for the first time: turn on the headphones by rotating the power button on the left ear cup. You'll see a light flash red and blue. On your phone or computer, go to Bluetooth settings and look for "Beats Solo 4" in the available devices list. Tap or click it, and the connection completes in a few seconds. The light will turn solid blue when pairing is done.

If the headphones don't appear in your Bluetooth list, make sure they're in pairing mode. Hold down the power button for about 10 seconds until the light flashes red and blue again. If you're still not seeing them, restart your device's Bluetooth and try again.

Key Takeaways

  • Beats Solo 4 pair through Bluetooth and enter pairing mode automatically the first time you turn them on.
  • Go to your device's Bluetooth settings, find "Beats Solo 4" in the available devices list, and tap or click to connect.
  • After the first pairing, the headphones reconnect automatically to the last device you used them with.
  • If pairing fails, hold the power button for 10 seconds to re-enter pairing mode and restart your device's Bluetooth.
  • You can pair the same headphones to multiple devices, but they only connect to one at a time.

Connecting to an iPhone or iPad

On iPhone and iPad, open Settings, tap Bluetooth, and make sure it's turned on. The headphones should appear under "Other Devices" within a few seconds of turning them on. Tap "Beats Solo 4" to connect. Once paired, they'll show under "My Devices" with a blue checkmark.

If you have an Apple ID and are signed into iCloud on your iPhone, iPad, and Mac, the headphones will automatically appear as an option on your other Apple devices without needing to pair them again. You can switch between devices by opening Control Center (swipe down from the top right on iPhone 12 and later, or up from the bottom on older models) and tapping the audio icon to select Beats Solo 4.

Connecting to an Android phone

On Android, open Settings, go to Connected Devices or Bluetooth (the exact name varies by phone maker), and turn Bluetooth on. The headphones will appear in the list of available devices. Tap "Beats Solo 4" to pair. Once connected, they'll show as "Connected" or with a checkmark.

Android doesn't automatically sync Bluetooth devices across phones the way Apple does, so you'll need to pair the headphones separately on each Android device you want to use them with. To switch between Android phones, turn off Bluetooth on the phone you're leaving and turn it on on the phone you're moving to. The headphones will reconnect to the last device they were paired with.

Connecting to a Mac or Windows computer

On Mac, click the Apple menu, go to System Settings, click Bluetooth, and make sure it's on. The headphones will appear in the list. Click "Beats Solo 4" to connect. On Windows, go to Settings, click Bluetooth & Devices, turn Bluetooth on, and click "Add Device." Select "Bluetooth" and then tap "Beats Solo 4" from the list.

Once paired to a Mac, the headphones will appear as an audio output option in the menu bar. Click the volume icon and select Beats Solo 4 to switch to them. On Windows, right-click the volume icon in the taskbar, go to Open Volume Mixer, and select Beats Solo 4 as the output device.

Switching between devices you've already paired

Once you've paired Beats Solo 4 to multiple devices, you can switch between them without re-pairing. Turn off Bluetooth on the device you're leaving, then turn on Bluetooth on the device you want to use. The headphones will reconnect to that device within a few seconds.

On iPhones and iPads with the same Apple ID, you can also switch by opening Control Center and tapping the audio icon. A list of available audio devices appears, including Beats Solo 4. Tap it to switch when ready. This works across iPhone, iPad, Mac, and Apple Watch if they're all signed into the same account.

Troubleshooting connection problems

If the headphones won't pair, the most common fix is to restart both devices. Turn off the headphones completely, wait 10 seconds, and turn them back on. Then restart your phone or computer's Bluetooth by turning it off and back on in settings. Try pairing again.

If the headphones were previously paired to another device, they may try to reconnect to that device instead of pairing with a new one. Hold the power button for 10 seconds until the light flashes red and blue to force pairing mode. If you want to completely unpair them from an old device, go to that device's Bluetooth settings, find Beats Solo 4, and select "Forget" or "Remove."

If you're having trouble with audio quality or the connection keeps dropping, make sure the headphones are fully charged. Low battery can cause connection problems. Also check that your device's Bluetooth is up to date — on phones, this usually means updating to the latest iOS or Android version.

Checking battery and updating firmware

You can see the Beats Solo 4 battery level on your phone or computer once they're paired. On iPhone and iPad, swipe to the battery widget page or open Control Center to see the headphones' battery percentage. On Android, the battery usually shows in the Bluetooth settings next to the device name. On Mac and Windows, the battery appears in the Bluetooth menu.

Beats occasionally releases firmware updates that improve connection stability and sound. To update, read the Beats app on your phone (available on both iPhone and Android). Open the app, select your headphones, and follow any prompts to update. You'll need to keep the headphones charged and within Bluetooth range of your phone during the update.

Frequently Asked Questions

Can I pair Beats Solo 4 to multiple devices at the same time?

No, the headphones only connect to one device at a time. However, you can pair them to as many devices as you want and switch between them by turning Bluetooth off on one device and on on another. The headphones will reconnect to the device you're switching to within a few seconds.

Why do my Beats Solo 4 keep disconnecting?

Disconnections usually happen because the battery is low, the headphones are out of Bluetooth range (typically 30 feet), or there's interference from other wireless devices. Charge the headphones fully, move closer to your device, and try moving away from Wi-Fi routers or microwaves. If the problem continues, restart both the headphones and your device.

How do I reset Beats Solo 4 if they won't pair?

Hold down the power button for 15 seconds until the light flashes red. Release the button and wait a few seconds. The headphones will restart and return to pairing mode. Try pairing again with your device. This erases all previous pairings, so you'll need to pair them to your devices again.

Do I need the Beats app to use the headphones?

No, the headphones work without the app. The Beats app is optional and lets you adjust sound settings, check battery, and update firmware. If you don't read the app, the headphones will still pair and play audio normally through your device's standard Bluetooth connection.

Can I use Beats Solo 4 with both a phone and computer at the same time?

No, they only connect to one device at a time. To switch from your phone to your computer, turn off Bluetooth on your phone and turn it on on your computer. The headphones will reconnect to the computer within a few seconds. You'll need to manually switch each time you want to change devices.