Turn on your Beats and put them in pairing mode
Open the Beats Solo 3 by rotating the ear cup outward. Press and hold the power button on the left ear cup for about 15 seconds until you see the LED light flash red and blue alternately. This flashing pattern means the headphones are in pairing mode and ready to connect to your iPhone.
The power button is a small circular button located on the underside of the left ear cup. If the light flashes only red, the battery is low — charge the headphones for at least 15 minutes before trying again. A solid blue light means they are already paired to another device, so the red-and-blue flash is what you are looking for.
Key Takeaways
- Put your Beats Solo 3 in pairing mode by holding the power button for 15 seconds until the light flashes red and blue.
- Open Settings on your iPhone, go to Bluetooth, and turn it on if it is not already active.
- Tap the Beats Solo 3 name when it appears in the Bluetooth list to complete the connection.
- Once paired, your Beats will reconnect automatically to your iPhone whenever both devices are turned on and near each other.
- If pairing fails, restart both the headphones and your iPhone, then try again from the beginning.
Open Bluetooth settings on your iPhone
Unlock your iPhone and open the Settings app — it is the gray icon with gears. Scroll down and tap Bluetooth. If the toggle next to Bluetooth is gray, tap it to turn Bluetooth on. The toggle will turn green when Bluetooth is active.
Your iPhone will now search for nearby devices in pairing mode. This usually takes a few seconds. Leave this screen open while your Beats are flashing red and blue.
Select the Beats Solo 3 from the list
Under the "Other Devices" section, you will see "Beats Solo3" appear once the headphones are detected. Tap this name to start the pairing process. Your iPhone will send a connection request to the headphones.
The pairing usually completes within 10 seconds. Once connected, the red-and-blue flashing light on the Beats will stop and turn solid blue. The Beats Solo3 name will move from "Other Devices" to a new section labeled "My Devices" in your Bluetooth settings.
Test the connection with sound
Open any app that plays audio — Music, Podcasts, YouTube, or a voice memo. Start playing something and you should hear sound coming from your Beats Solo 3 instead of your iPhone speaker. If you hear nothing, go back to Bluetooth settings and make sure the Beats are still listed under "My Devices" with a checkmark next to the name.
Adjust the volume using the buttons on the left ear cup of the Beats. The volume rocker is located on the back of the ear cup. Press up to increase volume and down to decrease it.
Reconnect on future uses
Once your Beats Solo 3 are paired to your iPhone, they will reconnect automatically whenever you turn them on and your iPhone is nearby with Bluetooth enabled. You do not need to repeat the pairing process. Just power on the headphones and they will connect within a few seconds.
If your Beats do not reconnect automatically, open Bluetooth settings, tap the Beats Solo3 name, and select "Connect". If they still do not connect, restart both devices — turn off the Beats, turn off Bluetooth on your iPhone, wait 10 seconds, then turn both back on.
Disconnect or forget the Beats if needed
To temporarily disconnect the Beats without erasing the pairing, turn off the headphones or turn off Bluetooth on your iPhone. The pairing information stays saved, so reconnection is when ready next time.
To completely remove the pairing — for example, if you are giving the headphones to someone else — go to Bluetooth settings, tap the information icon next to "Beats Solo3", and select "Forget This Device". This erases the pairing from your iPhone. The Beats will no longer reconnect automatically, and you will need to repeat the full pairing process if you want to use them with this iPhone again.
Troubleshooting when pairing fails
If the Beats do not appear in your Bluetooth list after 30 seconds, make sure they are actually in pairing mode — the light should be flashing red and blue, not solid blue or red. If the light is solid, hold the power button again for 15 seconds to re-enter pairing mode.
If your iPhone shows the Beats in the list but the connection fails when you tap them, restart both devices. Turn off the Beats completely, go to Settings > General > Shut Down on your iPhone, wait 10 seconds, then turn both back on and try pairing again. If this does not work, forget the device in Bluetooth settings and start the pairing process from the beginning.
Occasionally, Bluetooth interference from other devices in the area can prevent pairing. Move away from other wireless devices like routers, microwaves, or other phones and try again. If you have previously paired the Beats to a different iPhone or device, make sure that device is turned off or has Bluetooth disabled, as the Beats may try to reconnect to it instead.
Frequently Asked Questions
Why does my iPhone not see the Beats in the Bluetooth list?
The most common reason is that the Beats are not actually in pairing mode. The light needs to flash red and blue — if it is solid blue or red, hold the power button for 15 seconds again. Also check that Bluetooth is turned on in your iPhone settings, and that you are looking at the Bluetooth screen, not another settings page.
Can I pair the Beats Solo 3 to multiple iPhones?
Yes, the Beats can be paired to multiple devices. However, they can only be actively connected to one device at a time. If you want to switch from one iPhone to another, turn off Bluetooth on the first iPhone or turn off the Beats, then turn the Beats back on near the second iPhone and they will reconnect to it.
What if the Beats keep disconnecting from my iPhone?
First, check that your iPhone has Bluetooth enabled and that you are within about 30 feet of the headphones. If disconnections keep happening, forget the Beats in Bluetooth settings and pair them again from scratch. If the problem continues, restart your iPhone and the Beats, then try pairing once more.
Do I need to charge the Beats before pairing them?
The Beats do not need to be fully charged, but they do need enough battery to enter pairing mode. If the power button does not respond or the light does not flash, charge them for at least 15 minutes, then try again.
Why does the pairing work but I hear no sound?
Check that the Beats are not muted — some models have a mute switch. Also make sure the volume is turned up on both the Beats and your iPhone. If you still hear nothing, go to Bluetooth settings, disconnect the Beats, and reconnect them. If sound still does not play, restart both devices.