Pairing Beats Solo with your phone or computer

Beats Solo headphones connect through Bluetooth, a wireless standard that lets devices find and communicate with each other. The first time you use them, you'll put the headphones into pairing mode, then select them from your device's Bluetooth menu. After that, they'll reconnect automatically whenever you turn them on near that device.

The process takes about two minutes and works the same way whether you're connecting to an iPhone, Android phone, Mac, Windows computer, or tablet. You don't need an app or a cable — just the headphones and the device you want to use them with.

Key Takeaways

  • Turn on your Beats Solo by rotating the power switch on the left ear cup, then hold the power button for five seconds until the LED light flashes white.
  • On your phone or computer, go to Bluetooth settings and look for "Beats Solo" in the list of available devices, then tap or click it to pair.
  • Once paired, your Beats Solo will reconnect automatically the next time you turn them on near that device.
  • If pairing fails, forget the headphones from your device's Bluetooth menu and start over from the beginning.
  • Beats Solo will stay connected to the last device you used them with unless you manually switch to a different one.

Turning on your Beats Solo and entering pairing mode

On the left ear cup, you'll find a power switch and a power button stacked vertically. Rotate the power switch upward to turn the headphones on — you'll hear a startup sound and see a white LED light on the right ear cup. The light will stay on steadily for a few seconds, then turn off.

Now hold down the power button (the one above the switch) for about five seconds. The LED light will flash white and red alternately. This flashing means the headphones are in pairing mode and searching for a device to connect to. If the light only flashes white, keep holding the button a bit longer until you see the red flash too.

Leave the headphones in pairing mode while you set up your device — they'll stay searchable for about five minutes before timing out.

Finding and selecting Beats Solo in your device's Bluetooth menu

On an iPhone or iPad, go to Settings, tap Bluetooth, and make sure it's turned on. Wait a few seconds for your device to scan for nearby Bluetooth devices. "Beats Solo" should appear in the list under "Other Devices." Tap it to pair.

On an Android phone, go to Settings, then Bluetooth (the exact path varies by manufacturer, but it's usually under "Connected devices" or "Connections"). Make sure Bluetooth is on, then tap "Pair new device" or look for a plus icon. Select "Beats Solo" from the list that appears.

On a Mac, click the Apple menu, go to System Settings, then Bluetooth. You'll see "Beats Solo" in the list of available devices. Click it to pair.

On a Windows computer, click the Windows icon, go to Settings, then Bluetooth & devices. Click "Add device," select Bluetooth, and choose "Beats Solo" from the list.

What happens after you pair successfully

Once you tap or click "Beats Solo," your device will connect and the LED light on the headphones will turn off. You'll hear a confirmation sound through the headphones. The pairing is now complete — your device remembers these headphones, and they'll reconnect automatically the next time you turn them on.

You can now play audio from your device and control it using the buttons on the headphones. The power button also acts as a play/pause button, and you can press it twice to skip forward or three times to skip backward.

Connecting to a different device after the first pairing

If you want to use your Beats Solo with a second device — say, switching from your phone to your laptop — turn on the headphones near the new device. Go to that device's Bluetooth menu and select "Beats Solo" again. The headphones will pair with the new device without forgetting the first one.

The headphones will stay connected to whichever device you used them with most recently. If you turn them on and they connect to the wrong device, go to your preferred device's Bluetooth menu and select "Beats Solo" to switch.

Troubleshooting when pairing doesn't work

If "Beats Solo" doesn't appear in your device's Bluetooth list, make sure the headphones are in pairing mode — the LED should be flashing white and red. If it's not, hold the power button for five seconds again. Also check that your device's Bluetooth is turned on and that you're not too far away (Bluetooth typically works within 30 feet).

If the headphones appear in the list but won't connect, or if they were previously paired and now won't reconnect, forget them from your device and start over. On iPhone, go to Settings > Bluetooth, find "Beats Solo," tap the info icon, and select "Forget This Device." On Android, long-press "Beats Solo" and tap "Unpair." On Mac or Windows, right-click or long-press "Beats Solo" and select "Remove" or "Forget." Then put the headphones back into pairing mode and pair them again from scratch.

If you still can't pair after forgetting and retrying, turn the headphones completely off by rotating the power switch downward, wait 10 seconds, then turn them back on and try again.

Checking battery and keeping headphones charged

Beats Solo are wireless, so they run on a built-in battery. You'll charge them using a USB-C cable (included in the box) connected to a power adapter. The LED light shows battery status: white means fully charged, amber means low battery, and red means critically low.

A full charge takes about two hours and gives you roughly 40 hours of listening time. If the battery dies completely, charge them for at least 15 minutes before trying to pair again — they won't enter pairing mode with a completely dead battery.

Frequently Asked Questions

Can I pair Beats Solo with multiple devices at the same time?

No, Beats Solo can only play audio from one device at a time. However, they can be paired with multiple devices and will automatically connect to whichever one you used them with most recently. To switch to a different device, go to that device's Bluetooth menu and select "Beats Solo" again.

Why do my Beats Solo keep disconnecting?

Disconnections usually happen when your device's Bluetooth is turned off, when you move too far away (beyond about 30 feet), or when the battery is very low. Check that Bluetooth is on, stay within range, and charge the headphones if the battery indicator is red or amber. If disconnections continue, forget the headphones and pair them again.

Do I need to read an app to use Beats Solo?

No app is required to pair or use Beats Solo. They work with just Bluetooth. However, Beats makes an optional app (available on iPhone and Android) that lets you adjust sound settings and check battery level, but it's not necessary for basic pairing and listening.

What if my device doesn't have Bluetooth?

Beats Solo require Bluetooth and cannot work with devices that don't have it. Most modern phones, tablets, and computers have Bluetooth built in, but older devices may not. Check your device's specifications or settings to confirm Bluetooth is available.

How do I know if my Beats Solo are in pairing mode?

The LED light on the right ear cup will flash white and red alternately when pairing mode is active. If you see only a steady white light or no light at all, hold the power button for five seconds until the flashing pattern appears.