The basic connection process
Beats Flex connect to your iPhone through Bluetooth, which means they pair once and then reconnect automatically whenever they're near your phone. The first pairing takes about two minutes and requires only that you turn on the headphones and follow prompts on your screen — you don't need to open any app or visit settings manually.
Before you start, make sure your iPhone's Bluetooth is on. Swipe down from the top-right corner of your screen (or up from the bottom on older iPhones) to open Control Center, and tap the Bluetooth icon so it turns blue. Then turn on your Beats Flex by pressing and holding the power button on the left earbud for about three seconds until you see a light flash.
Your iPhone will detect the headphones within a few seconds and show a pairing screen. Tap Connect, and you're done — the headphones are now paired to that iPhone and will connect automatically whenever Bluetooth is on.
Key Takeaways
- Turn on Bluetooth in Control Center, then hold the power button on the left earbud for three seconds until the light flashes.
- Your iPhone will show a pairing screen within seconds; tap Connect to complete the pairing.
- After the first pairing, Beats Flex will reconnect automatically whenever Bluetooth is on and the headphones are powered up.
- If pairing fails, forget the headphones in Bluetooth settings and try again from the beginning.
- Beats Flex work with any iPhone running iOS 13.2 or later, but pairing is fastest on the same Apple ID as your iPhone.
What to do if pairing doesn't work
If the pairing screen doesn't appear after you turn on the headphones, the most common fix is to forget the headphones and start over. Go to Settings > Bluetooth, find "Beats Flex" in the list, tap the i icon next to it, and tap Forget This Device. Then turn off the headphones, turn them back on, and try pairing again.
If the headphones still don't appear, restart your iPhone. Hold down the power button and either volume button until the power-off slider appears, drag it to turn off the phone, wait ten seconds, then press the power button again to turn it back on. Once your iPhone restarts, turn on the Beats Flex and try pairing again.
Make sure the headphones have battery. Beats Flex show a red light when the battery is very low. Plug them into a USB-C charger for at least 15 minutes before trying again. If the light doesn't turn on when you plug them in, they may need to charge for an hour before they respond.
Reconnecting after the first pairing
Once you've paired Beats Flex to your iPhone, they reconnect on their own whenever both devices are turned on and Bluetooth is enabled. You don't need to do anything — just turn on the headphones and they'll connect within a few seconds. Your iPhone will show a small notification at the top of the screen when the connection is complete.
If the headphones don't reconnect automatically, check that Bluetooth is still on in Control Center. If it is, turn the headphones off and back on. If they still don't connect, go to Settings > Bluetooth and look for "Beats Flex" in the list. If it's there but shows "Not Connected," tap the name to reconnect manually.
Connecting to a second iPhone or other device
Beats Flex can pair with multiple devices, but they only connect to one at a time. To pair them with a second iPhone or iPad, go to Settings > Bluetooth on the new device, turn on the headphones, and tap "Beats Flex" when it appears. The headphones will now pair with both devices.
When you want to switch which device the headphones are connected to, go to Bluetooth settings on the device you want to use and tap "Beats Flex" to reconnect. The headphones will disconnect from the previous device and connect to the new one. This usually takes a few seconds.
If you want to remove the headphones from a device entirely, go to Settings > Bluetooth, tap the i icon next to "Beats Flex," and tap Forget This Device. They'll no longer appear in that device's Bluetooth list.
Checking battery and controlling playback
Once your Beats Flex are connected, you can see the battery level on your iPhone's lock screen or in Control Center — it appears as a small battery icon next to the Bluetooth symbol. The headphones themselves show battery status with a light on the left earbud: green means good battery, amber means low battery, and red means critically low.
You can control music playback using the button on the left earbud. Press once to play or pause, press twice to skip to the next track, and press three times to go back to the previous track. You can also use Siri by holding down the button for about two seconds, then speaking a command like "play music" or "call Mom."
Troubleshooting sound issues after connecting
If your Beats Flex are connected but you hear no sound, first check that the volume isn't muted. On your iPhone, press the volume-up button on the side of the phone to make sure the volume is turned up. You should see a volume slider on your screen.
Next, make sure the audio is actually playing through the headphones and not through your iPhone's speaker. Open any app that plays sound — music, a video, or a podcast — and look at the audio output icon (usually a speaker symbol). If it shows your iPhone speaker instead of "Beats Flex," tap it and select the headphones from the list.
If one earbud has no sound, try turning the headphones off and back on. If that doesn't work, forget the headphones in Bluetooth settings and pair them again. Occasionally, one earbud can lose sync with the other, and repairing fixes it.
Frequently Asked Questions
Do I need to pair Beats Flex every time I use them?
No. After the first pairing, they reconnect automatically whenever both the headphones and your iPhone are turned on and Bluetooth is enabled. You only pair once, unless you forget the device or pair them with a different phone.
Can I use Beats Flex with an older iPhone?
Beats Flex work with iPhone 6s and later running iOS 13.2 or newer. Check your iPhone's iOS version in Settings > General > About. If your version is older, you can update it in Settings > General > Software Update.
What if my Beats Flex keep disconnecting?
Disconnect them in Bluetooth settings, restart your iPhone, and pair them again. If disconnections continue, the headphones may have a low battery — charge them fully. If the problem persists after a full charge, try resetting the headphones by holding the power button for ten seconds until the light flashes red and white.
Can I use Beats Flex with multiple iPhones at the same time?
No, they connect to only one device at a time. To switch between iPhones, go to Bluetooth settings on the iPhone you want to use and tap "Beats Flex" to reconnect. The headphones will disconnect from the previous phone automatically.
Why does my iPhone keep asking me to pair Beats Flex?
This usually means the pairing didn't save properly. Forget the headphones in Bluetooth settings, restart your iPhone, and pair them again from the beginning. Make sure you tap Connect on the pairing screen and wait for the confirmation before closing the screen.