Beats earbuds connect to Android through Bluetooth, just like any other wireless headphones
Open Bluetooth on your Android phone, put your Beats earbuds in pairing mode, and select them from the list of available devices. The whole process takes about two minutes. After the first connection, your phone will remember the earbuds and reconnect automatically when you turn them on.
The steps are the same whether you have Beats Studio Pro, Beats Fit Pro, Beats Solo Buds, or any other model. The only difference is how you enter pairing mode — some models use a button on the case, others use a button on the earbud itself.
Key Takeaways
- Enable Bluetooth on your Android phone, then hold the pairing button on your Beats case or earbud until the light flashes white.
- Go to Settings > Connected devices > Pair new device on most Android phones, though the exact path varies by manufacturer.
- Tap your Beats model name when it appears in the list, and your phone will connect within seconds.
- Once paired, your earbuds will reconnect automatically whenever Bluetooth is on and the earbuds are powered up.
Put your Beats into pairing mode
Before your Android phone can see your Beats, you need to put them in pairing mode. This tells the earbuds to broadcast their signal so your phone can find them. The method depends on which Beats model you own.
For Beats earbuds with a charging case (Beats Fit Pro, Beats Pro, Beats Studio Pro), open the case and press and hold the small button on the back of the case until the light inside flashes white. This usually takes about 10 to 15 seconds. For Beats Solo Buds, which have no case, press and hold the power button on the left earbud until you see a white flashing light.
Leave the earbuds in pairing mode while you move to your phone. The pairing mode stays active for about five minutes, so you have time to navigate to your Bluetooth settings.
Open Bluetooth settings on your Android phone
The exact path to Bluetooth settings varies depending on whether you have a Samsung, Google Pixel, OnePlus, or another Android manufacturer's phone. The most common route is Settings > Connected devices > Pair new device or Bluetooth.
On Samsung phones, go to Settings > Connections > Bluetooth. On Google Pixel phones, go to Settings > Connected devices > Pair new device. On OnePlus phones, go to Settings > Bluetooth. If you cannot find Bluetooth in Connected devices, look for a Bluetooth option directly in the main Settings menu.
Once you open Bluetooth settings, make sure Bluetooth is turned on. You should see a list of available devices appear within a few seconds.
Select your Beats from the device list
Your Beats earbuds will appear in the list of available devices with their model name — for example, "Beats Fit Pro" or "Beats Solo Buds". Tap the name to connect.
Your phone will show a "Connecting" message for a few seconds, then display "Connected" when the pairing is complete. Some phones also play a notification sound or show a pop-up confirming the connection. This is normal.
If your Beats do not appear in the list after 30 seconds, go back and check that the white light on the case or earbud is still flashing. If the light has stopped, put them back in pairing mode and try again.
Reconnect to your Beats after the first time
After you pair your Beats once, your Android phone remembers them. The next time you turn on your earbuds, they will connect automatically as long as Bluetooth is on. You do not need to go through pairing mode again.
If your Beats do not reconnect automatically, open Bluetooth settings and tap your Beats model name in the list of paired devices. The connection should happen when ready. If they still do not connect, turn off your earbuds, turn them back on, and wait 10 seconds for the connection to establish.
Troubleshoot if your Beats will not connect
If your Beats appear in the pairing list but fail to connect, or if they connect and then disconnect repeatedly, try these steps in order. First, forget the device from your phone: go to Bluetooth settings, find your Beats in the list of paired devices, tap the settings icon or menu next to them, and select "Forget" or "Unpair". Then put your Beats back in pairing mode and pair them again from scratch.
If that does not work, restart your Android phone completely. Power it off, wait 10 seconds, and turn it back on. Then try pairing again. Restarting clears temporary Bluetooth conflicts that sometimes prevent connection.
If your Beats still will not connect after forgetting and restarting, check that your earbuds have enough battery. A low battery can prevent pairing. Charge your Beats for at least 15 minutes, then try again. If the problem continues, your Beats may need a factory reset — check the Beats support website for your specific model's reset instructions.
Use your Beats with multiple Android devices
Your Beats can pair with multiple Android phones, but they can only connect to one phone at a time. If you want to switch from one phone to another, forget your Beats from the first phone's Bluetooth settings, then pair them with the second phone.
Some Beats models support multipoint connection, which means they can stay paired to two devices at once and switch between them automatically. Check your Beats model's specifications on the Apple website to see if this feature is available. If your model supports multipoint, you can pair it with two Android phones and it will connect to whichever one is actively using audio.
Frequently Asked Questions
Why do my Beats keep disconnecting from my Android phone?
Repeated disconnections usually mean Bluetooth interference or a weak connection. Move closer to your phone, away from other wireless devices like routers or microwaves. If the problem persists, forget your Beats from Bluetooth settings and pair them again. If disconnections continue, restart your phone and try once more.
Can I use Beats earbuds with Android if they were originally paired with an iPhone?
Yes. Beats work with any device that supports Bluetooth, regardless of what they were paired with before. straightforward forget them from the iPhone's Bluetooth settings, put them in pairing mode, and pair them with your Android phone. They will work exactly the same way.
Do I need the Beats app to use my earbuds with Android?
No. Your Beats will work with Android through Bluetooth alone. The Beats app is available on Android but is optional — it only adds features like custom sound settings and firmware updates. You can use your earbuds without installing the app.
What if my Beats model does not appear in the pairing list?
Make sure the white light on your Beats is flashing, which means they are in pairing mode. If the light is not flashing, hold the pairing button longer — some models require 15 to 20 seconds. Also check that Bluetooth is turned on in your Android settings and that you are looking at the "Available devices" list, not the "Paired devices" list.
Can I control volume and skip tracks on my Beats while using Android?
Yes. Most Beats models have touch controls or buttons that work with Android. Tap or press the earbud to play or pause, double-tap to skip forward, and triple-tap to skip back. Volume control depends on your model — some have touch gestures, others do not. Check your Beats manual for the exact controls on your model.