AirPods work with Windows, but the setup is different from pairing with an iPhone

AirPods connect to Windows PCs through Bluetooth, the same wireless standard that links them to iPhones and iPads. The pairing process is straightforward, but Windows handles Bluetooth differently than Apple's operating system does — you will not see the automatic pop-up that appears on an iPhone. Instead, you manually add the AirPods through Windows Settings, and the connection is just as stable once it is established.

The main limitation is that some AirPods features do not work on Windows. You cannot use Siri voice commands, automatic ear detection (which pauses audio when you remove them), or spatial audio. You also cannot switch between devices as seamlessly as you can within Apple's ecosystem. But for basic audio playback, video calls, and gaming, AirPods perform reliably on Windows.

Key Takeaways

  • Put your AirPods in pairing mode by holding the button on the back of the case for three seconds until the light flashes white.
  • Open Windows Settings, go to Bluetooth & devices, and select your AirPods from the list of available devices.
  • Once paired, you can switch between Windows and other devices, but you will need to manually reconnect if the connection drops.
  • Some AirPods features like Siri, automatic pause, and spatial audio do not work on Windows, but audio quality and call clarity remain good.

Put your AirPods in pairing mode

Before Windows can find your AirPods, they need to broadcast a pairing signal. Open the AirPods case and look at the small LED light on the front. Hold down the button on the back of the case (not the lid) for about three seconds. The light will flash white, which means the AirPods are now in pairing mode and searchable by any nearby device.

Pairing mode lasts about 15 minutes, so you have time to move to your Windows PC and start the connection process. If the light turns amber instead of white, the AirPods are already paired to another device — hold the button again for a few more seconds until it flashes white.

Open Bluetooth settings on your Windows PC

Click the Start button in the bottom left corner of your screen and type "Bluetooth" into the search box. Select "Bluetooth and other devices" from the results. This opens the Bluetooth settings panel where Windows displays all available wireless devices nearby.

Alternatively, you can reach the same panel by opening Settings (press Windows key + I), then clicking "Bluetooth & devices" in the left sidebar. Either route takes you to the same place.

Select your AirPods from the device list

In the Bluetooth & devices panel, look for a section labeled "Available devices" or "Other devices." Your AirPods should appear in this list within a few seconds if they are in pairing mode. The entry will show "AirPods" or "AirPods Pro" depending on your model. Click on it once to select it.

Windows will then attempt to pair with the AirPods. You may see a brief notification asking you to confirm the pairing — if so, click "Yes" or "Connect." The process usually takes five to ten seconds. Once complete, your AirPods will move from the "Available devices" section to the "Connected devices" section, and you will see a "Connected" label next to them.

Test audio and adjust volume

Open any audio source on your Windows PC — a YouTube video, a music streaming app, or a voice call — and play something. You should hear sound through your AirPods. If you do not, right-click the speaker icon in the bottom right corner of your taskbar, select "Open Volume mixer," and make sure your AirPods are set as the default playback device. Click on your AirPods in that menu and select "Set as default."

Adjust the volume using the volume buttons on your keyboard or the volume slider in Windows. You can also control volume by double-tapping the outside of either AirPod (if you have AirPods Pro or a newer model with touch controls), though the response is sometimes slower on Windows than on Apple devices.

Reconnect if the connection drops

AirPods stay paired to your Windows PC even after you disconnect them, so the next time you want to use them, you do not need to repeat the full pairing process. straightforward put the AirPods in your ears, open the Bluetooth settings, and click your AirPods in the connected devices list. They should reconnect within a few seconds.

If your AirPods do not reconnect automatically, they may have paired to another device (like your phone) instead. Put them back in pairing mode by holding the button on the case, then select them again in Windows Bluetooth settings. If reconnection still fails, forget the device entirely: right-click your AirPods in the Bluetooth settings, select "Remove device," and pair them again from the beginning.

Understand what features do and do not work on Windows

AirPods on Windows deliver audio and microphone input reliably, so calls, video meetings, and gaming work well. However, Windows does not support several AirPods-specific features. Siri voice commands do not function — you cannot set up Siri by double-tapping your AirPods. Automatic ear detection (which pauses audio when you remove them) is disabled. Spatial audio and dynamic head tracking do not work. Announce Messages and Live Listen are also unavailable.

These limitations exist because those features rely on Apple's software ecosystem. The AirPods themselves are not limited — they straightforward cannot communicate with Windows the way they do with iOS. For everyday listening, calls, and video, the experience is smooth. If you rely heavily on Siri or spatial audio, you may want to consider Windows-native headphones instead, though many users find AirPods worth the trade-off for comfort and battery life.

Frequently Asked Questions

Do I need to unpair my AirPods from my iPhone to use them on Windows?

No. AirPods can stay paired to multiple devices at once. However, they will only connect to one device at a time. If your AirPods are connected to your iPhone, you will need to disconnect them there (by going to iPhone Bluetooth settings and tapping "Disconnect") before they will connect to Windows. Once you reconnect them to your iPhone, they will disconnect from Windows.

Why do my AirPods keep disconnecting from Windows?

Windows sometimes deprioritizes Bluetooth devices if they are not actively in use. If your AirPods disconnect frequently, open Bluetooth settings, right-click your AirPods, select "Device properties," and toggle on "Connect even when locked" if that option appears. You can also try moving your PC and AirPods closer together, as Windows Bluetooth range is sometimes shorter than Apple's. If the problem persists, forget the device and pair again.

Can I use AirPods for video calls on Windows?

Yes. Once paired, your AirPods will work as both a speaker and microphone in Zoom, Teams, Discord, and other video call apps. The microphone quality is good for most purposes, though some users report that Windows picks up more background noise through AirPods than macOS does. You can test the microphone in Windows Settings under "Sound" > "Input" before joining a call.

Will my AirPods battery drain faster on Windows than on Apple devices?

Not significantly. Battery life should be similar to what you experience on an iPhone or iPad. However, Windows does not display the battery percentage of your AirPods in the system tray the way macOS does. You can check battery level by opening the AirPods case near your Windows PC and looking at the LED light, or by checking the battery in your iPhone if you have one paired to the same AirPods.

What if Windows does not detect my AirPods at all?

First, make sure Bluetooth is turned on in Windows Settings. Then, restart your AirPods by placing them in the case, closing the lid for ten seconds, and opening it again. Hold the button on the back for three seconds to enter pairing mode. If Windows still does not see them, restart your PC and try again. If the problem continues, your AirPods may have a software issue — visit Apple's support site for troubleshooting specific to your model.