AirPods Max connect to a PC the same way they connect to an iPhone — through Bluetooth — but Windows and Mac handle the pairing process slightly differently
Your AirPods Max will work with any Windows PC or Mac that has Bluetooth built in (most do). The headphones don't need special software or drivers. Once you pair them once, they'll reconnect automatically when you turn them on near your computer. The pairing process takes about two minutes and you only do it once.
The main difference between connecting to a phone and connecting to a computer is that your computer won't automatically switch to AirPods Max the way your iPhone does. You'll need to manually select them as your audio output in your system settings each time you use them. This is normal for all Bluetooth headphones on computers.
Key Takeaways
- AirPods Max pair through Bluetooth and work with any Windows PC or Mac with Bluetooth capability — no special software required.
- On Mac, you open System Settings, go to Bluetooth, and select AirPods Max from the list when they're in pairing mode.
- On Windows, you go to Settings, then Devices, then Bluetooth, and add a new device while AirPods Max are in pairing mode.
- After pairing once, you must manually select AirPods Max as your audio output each time you use them on a computer.
- If pairing fails, reset the AirPods Max by holding the noise control button for 15 seconds until the light flashes amber, then try again.
How to put AirPods Max into pairing mode
Before your computer can find your AirPods Max, the headphones need to be in pairing mode. This is the state where they broadcast their presence to nearby devices. On AirPods Max, pairing mode activates automatically the first time you power them on. If you've already paired them to another device (like your iPhone), you'll need to manually enter pairing mode again.
To enter pairing mode on AirPods Max, hold down the noise control button (the button on the right ear cup) for about 15 seconds. You'll see the LED light on the headphones flash amber, then white. When it flashes white, the headphones are in pairing mode and ready to be discovered. This mode lasts for about 15 minutes, so you have time to get to your computer's Bluetooth settings.
Pairing AirPods Max with a Mac
On a Mac, open System Settings by clicking the Apple menu in the top left corner and selecting System Settings. Then click Bluetooth in the left sidebar. Your Mac will begin scanning for nearby Bluetooth devices.
Look for AirPods Max in the list of available devices. When you see it, click the Connect button next to it. Your Mac will confirm the connection and the AirPods Max will show as "Connected" in the Bluetooth menu. You're done — the pairing is complete and will persist the next time you turn on the headphones near your Mac.
If AirPods Max doesn't appear in the list, make sure the headphones are in pairing mode (the LED should be flashing white). If they still don't show up after 30 seconds, try holding the noise control button for another 15 seconds to re-enter pairing mode, then check the Bluetooth menu again.
Pairing AirPods Max with a Windows PC
On Windows, open Settings by pressing the Windows key and typing "Settings," then pressing Enter. Click Devices in the left sidebar, then click Bluetooth and other devices. At the top of the page, you'll see a button labeled Add device or Add Bluetooth device — click it.
A window will open asking what type of device you want to add. Select Bluetooth. Windows will begin scanning for nearby Bluetooth devices. When AirPods Max appears in the list, click it to pair. Windows will show a confirmation message when the connection is successful.
If AirPods Max doesn't appear, verify that the headphones are in pairing mode by checking the LED light — it should be flashing white. If the list is empty after 30 seconds, close this window, make sure AirPods Max are in pairing mode again, and try clicking Add device once more.
Setting AirPods Max as your default audio output
After pairing, your computer knows about the AirPods Max, but it won't automatically send audio to them. You need to manually select them as your audio output device each time you use them. This is different from how iPhones work, and it's the same for all Bluetooth headphones on computers.
On Mac: Click the volume icon in the top right corner of your menu bar. A dropdown menu will appear. At the bottom, you'll see a section labeled "Output device." Click AirPods Max to route audio to the headphones. Any sound your Mac produces will now play through the headphones instead of your speakers.
On Windows: Open Settings, go to System, then click Sound. Scroll down to the "Output" section. You'll see a dropdown menu labeled "Choose your output device." Click it and select AirPods Max. Windows will when ready start sending audio to the headphones.
Troubleshooting connection problems
If your AirPods Max won't pair or keep disconnecting, the first step is to reset them. Hold the noise control button for 15 seconds until the LED flashes amber, then white. This clears any pairing issues without erasing your existing connections to other devices. Wait 10 seconds, then try pairing with your computer again.
If pairing still fails, check that Bluetooth is actually enabled on your computer. On Mac, open System Settings and click Bluetooth — you should see "Bluetooth: On" at the top. On Windows, open Settings, go to Bluetooth and other devices, and make sure the Bluetooth toggle is switched on. If Bluetooth is off, turn it on and try pairing again.
If your AirPods Max were previously paired to another device (like your iPhone), they may try to reconnect to that device instead of your computer. To prevent this, either turn off Bluetooth on the other device or forget the AirPods Max from that device's Bluetooth settings, then pair them fresh with your computer.
Why AirPods Max disconnect and how to prevent it
AirPods Max will disconnect from your computer if they move out of Bluetooth range (typically 30 feet) or if you turn them off. They'll also disconnect if you turn on Bluetooth on another device that they've been paired with — the headphones will switch to whichever device they were most recently connected to. This is by design and happens with all Bluetooth headphones.
To keep AirPods Max connected to your computer while using other devices, turn off Bluetooth on those other devices, or forget the AirPods Max from their Bluetooth settings. If you regularly switch between your computer and phone, you'll need to manually select AirPods Max in your computer's audio settings each time you want to use them there.
Frequently Asked Questions
Do I need to install any software or drivers for AirPods Max on my computer?
No. AirPods Max use standard Bluetooth, which is built into modern computers. Your Mac or Windows PC will recognize them automatically once they're paired. No drivers, apps, or software installation is required.
Why does my computer show AirPods Max as connected but I hear no sound?
The headphones are paired but not set as your audio output device. On Mac, click the volume icon in the menu bar and select AirPods Max under "Output device." On Windows, open Settings, go to Sound, and select AirPods Max from the "Choose your output device" dropdown. Once you do this, sound will play through the headphones.
Can I use AirPods Max with both my Mac and Windows PC at the same time?
You can pair AirPods Max to both devices, but they can only connect to one at a time. When you turn on the headphones near your Mac, they'll connect to the Mac. To switch to your Windows PC, you'll need to disconnect from the Mac (by turning off Bluetooth on the Mac or forgetting the AirPods Max) and then reconnect them to Windows.
What should I do if AirPods Max won't show up in my Bluetooth list?
First, make sure the headphones are in pairing mode — hold the noise control button for 15 seconds until the LED flashes white. Then check that Bluetooth is enabled on your computer. If they still don't appear after 30 seconds, reset the AirPods Max by holding the noise control button for 15 seconds until the LED flashes amber, wait 10 seconds, and try pairing again.
Will AirPods Max automatically reconnect to my computer when I turn them on?
Yes, once paired, AirPods Max will automatically reconnect to your computer via Bluetooth when you turn them on and they're in range. However, you'll still need to manually select them as your audio output device in your computer's sound settings each time you use them.