The basic connection process
AirPods Max connect to a laptop the same way they connect to an iPhone or iPad — through Bluetooth. You put the headphones into pairing mode, then tell your laptop to find and remember them. The whole process takes about two minutes and you only have to do it once; after that, your AirPods Max will reconnect automatically when you turn them on near your laptop.
The steps differ slightly depending on whether you have a Mac or a Windows laptop, because the Bluetooth settings live in different places. Both work reliably once you know where to look.
Key Takeaways
- AirPods Max pair through Bluetooth, which means your laptop needs to have Bluetooth turned on before you start.
- You set up pairing mode on the headphones by holding the button on the back of the right ear cup for about three seconds until the light flashes amber.
- On a Mac, you open System Settings, click Bluetooth, and select AirPods Max from the list that appears.
- On Windows, you go to Settings, then Devices, then Bluetooth & devices, and click "Add device" to find the headphones.
- Once paired, AirPods Max will connect automatically to your laptop whenever Bluetooth is on, without needing to repeat the pairing steps.
Pairing AirPods Max for the first time on Mac
Start by making sure Bluetooth is on. Click the Bluetooth icon in the menu bar at the top of your screen — it looks like a fan made of curved lines. If it says "Bluetooth: On", you are ready. If it is off, click it to turn it on.
Next, hold the button on the back of your right AirPods Max ear cup. This is the only physical button on the headphones. Hold it for about three seconds until you see the light on the front of the right ear cup flash amber. This means the headphones are in pairing mode and looking for a device to connect to.
Go to System Settings on your Mac. You can reach this by clicking the Apple menu in the top left corner and selecting "System Settings", or by opening System Settings from your Applications folder. Once it opens, click "Bluetooth" in the left sidebar. Your AirPods Max should appear in the list of available devices within a few seconds. Click "Connect" next to them.
Your Mac will confirm the connection with a notification. The light on your AirPods Max will turn off, which means they are now paired. You can close System Settings.
Pairing AirPods Max for the first time on Windows
First, turn on Bluetooth on your Windows laptop. Click the Windows icon in the bottom left corner of your screen, then type "Bluetooth" and select "Bluetooth and device settings" from the results. This opens the Bluetooth settings panel. Make sure the toggle at the top that says "Bluetooth" is switched on.
While that settings window is still open, hold the button on the back of your right AirPods Max ear cup for about three seconds until the light flashes amber. This puts the headphones into pairing mode.
In the Bluetooth settings window, click the button that says "Add device". Windows will start searching for nearby Bluetooth devices. Your AirPods Max should appear in the list within a few seconds. Click on them to connect.
Windows will show a confirmation message once the connection is complete. You can close the settings window. The next time you turn on your AirPods Max near this laptop, they will connect automatically without needing to repeat these steps.
What to do if your AirPods Max do not appear in the list
If you held the button for three seconds but the light did not flash amber, the headphones may not have entered pairing mode. Try again, but hold the button a bit longer — sometimes it takes four or five seconds. You should see the light change from off to amber.
If the light flashed amber but your AirPods Max still do not show up in the Bluetooth list, try moving them closer to your laptop. Bluetooth works best within about 30 feet, but pairing works more reliably when the devices are within a few feet of each other. Move the headphones closer and wait another 10 seconds for them to appear in the list.
If they still do not show up, restart the pairing process. On your AirPods Max, hold the button on the back of the right ear cup for about 15 seconds this time — longer than the three seconds for normal pairing mode. This resets the headphones and clears any previous pairing information. Then try the pairing steps again from the beginning.
Reconnecting after the first time
Once you have paired your AirPods Max to your laptop, you do not need to do anything special to reconnect them. straightforward turn on the headphones by putting them on your head or by holding the button on the back of the right ear cup. As long as Bluetooth is turned on on your laptop, the headphones will connect automatically within a few seconds.
You will hear a sound in the headphones when they connect. On a Mac, you may also see a notification in the top right corner of the screen. On Windows, you can check the Bluetooth settings to confirm they are connected — the headphones will show as "Connected" rather than "Available".
If your AirPods Max do not reconnect automatically, the most common reason is that Bluetooth is turned off on your laptop. Turn it back on using the same steps described above for your operating system. If Bluetooth is on but the headphones still will not connect, try turning the headphones off and on again by holding the button on the back of the right ear cup.
Switching AirPods Max between devices
AirPods Max can be paired to multiple devices at once, but they can only play audio from one device at a time. If you have already paired them to your iPhone or iPad, they will still remember that pairing when you pair them to your laptop.
To switch which device your AirPods Max are playing audio from, you have two options. The easiest way is to start playing audio on the device you want to use — for example, play a video on your laptop. The headphones will automatically switch to that device. Alternatively, you can manually select the headphones from the Bluetooth menu on whichever device you want to use. On a Mac, click the Bluetooth icon in the menu bar and select your AirPods Max. On Windows, open Bluetooth settings and click on the headphones.
If you want to unpair your AirPods Max from your laptop completely — for example, if you are selling the laptop or giving it to someone else — go to the Bluetooth settings on your laptop, find AirPods Max in the list, and select "Forget" or "Remove". This erases the pairing information from that laptop only. Your AirPods Max will still be paired to your other devices.
Troubleshooting audio and microphone issues
After you connect your AirPods Max to your laptop, audio should play through the headphones automatically. If it does not, check your laptop's sound settings. On a Mac, click the volume icon in the menu bar and make sure AirPods Max are selected as the output device. On Windows, right-click the volume icon in the bottom right corner, select "Open Volume mixer", and check that AirPods Max are set as the default device.
If you are using your AirPods Max for video calls or voice recording, the microphone should work automatically as well. However, some applications let you choose which microphone to use. If your laptop microphone is being used instead of the one built into the AirPods Max, open the process's settings and look for an audio or microphone option. Select "AirPods Max" or "AirPods Max Microphone" from the list.
If the microphone is not working at all, check your laptop's privacy settings. On a Mac, go to System Settings, click "Privacy & Security", then "Microphone", and make sure the process you are using has permission to access the microphone. On Windows, go to Settings, click "Privacy & security", then "Microphone", and toggle on the permission for the process.
Frequently Asked Questions
Do I need to pair AirPods Max to my laptop if I already paired them to my phone?
No, you need to pair them separately to each device. Pairing to your phone does not automatically pair them to your laptop. However, once you pair them to your laptop, they will remember that pairing and reconnect automatically the next time you use them with that laptop.
Can I use AirPods Max with both my Mac and Windows laptop?
Yes. You pair them to each laptop separately using the steps for that operating system. The headphones will remember both pairings and can switch between them, though they can only play audio from one device at a time.
Why do my AirPods Max keep disconnecting from my laptop?
The most common reason is that Bluetooth is turning off automatically, either because your laptop is going to sleep or because a power-saving setting is active. Check your laptop's power settings and make sure Bluetooth stays on during sleep. You can also try moving closer to your laptop, since weak Bluetooth signal can cause disconnections.
Will AirPods Max work with older laptops?
AirPods Max require Bluetooth 5.0 or later. Most laptops made in the last five years have this, but older models may not. Check your laptop's specifications to see which version of Bluetooth it has. If your laptop has an older version, you can use a USB Bluetooth adapter to add newer Bluetooth support.
Can I use AirPods Max with a laptop that does not have Bluetooth?
No, AirPods Max only connect via Bluetooth — there is no wired option. However, you can buy a small USB Bluetooth adapter that plugs into your laptop's USB port and adds Bluetooth support. These adapters are inexpensive and widely available online.