Put your AirPods in pairing mode, then select them from your laptop's Bluetooth menu

AirPods 3 connect to a laptop the same way any Bluetooth headphone does: you put the AirPods in pairing mode, then tell your laptop to find and remember them. The whole process takes about two minutes. After the first connection, your AirPods will reconnect automatically whenever you open the case near your laptop.

The steps differ slightly between Windows and Mac, but the principle is identical. You'll need your AirPods charged to at least 10 percent battery, and your laptop's Bluetooth turned on.

Key Takeaways

  • Open the AirPods case, hold the setup button on the back for three seconds until the light flashes white, then select AirPods 3 from your laptop's Bluetooth settings.
  • On a Mac, go to System Settings > Bluetooth, then click the plus button and choose your AirPods from the list.
  • On Windows, go to Settings > Bluetooth & devices > Add device, select Bluetooth, and choose your AirPods from the list.
  • Once connected once, your AirPods will reconnect automatically when you open the case near your laptop, as long as Bluetooth is on.
  • If your AirPods don't appear in the list, close the case, wait 10 seconds, open it again, and hold the setup button for another three seconds.

How to put AirPods 3 in pairing mode

Open the AirPods case and look at the small button on the back. Hold that button down for about three seconds. You'll see a light inside the case start to flash white — that's your signal that pairing mode is active. The AirPods are now discoverable and will show up in your laptop's Bluetooth menu for the next two minutes.

If the light flashes amber instead of white, the AirPods battery is too low. Close the case and let them charge for at least 15 minutes, then try again.

Connecting on a Mac

Click the Apple menu in the top-left corner and select System Settings. Then click Bluetooth in the left sidebar. You should see a list of available devices. Look for "AirPods 3" in that list and click it. Your Mac will ask you to confirm — click Connect.

Your Mac will remember these AirPods from now on. The next time you open the case near your Mac with Bluetooth on, they'll connect automatically without any extra steps.

Connecting on Windows

Click the Windows Start button and type "Bluetooth settings" into the search box, then press Enter. You can also go to Settings > Bluetooth & devices directly. Click the button that says "Add device" or the plus icon.

A window will pop up asking what kind of device you're adding. Click Bluetooth. Your laptop will scan for nearby devices — this takes about 10 seconds. When you see "AirPods 3" in the list, click it. Windows will show a pairing code on your screen; you don't need to do anything with it. Just wait for the connection to finish, which usually takes another 10 seconds.

What to do if your AirPods don't show up in the list

If you've held the setup button for three seconds and the light is flashing white, but your AirPods still don't appear in your laptop's Bluetooth menu, close the case completely. Wait 10 seconds, then open it again and hold the setup button for another three seconds. This resets the pairing mode.

Make sure your laptop's Bluetooth is actually turned on — it's straightforward to miss. On a Mac, check the Bluetooth icon in the top-right corner of the menu bar. On Windows, go to Settings > Bluetooth & devices and make sure the Bluetooth toggle is switched on. If Bluetooth is off, your laptop won't see the AirPods at all.

If you've already connected these AirPods to another device — like an iPhone or iPad — they may try to connect to that device instead. Turn off Bluetooth on that other device temporarily, then try connecting to your laptop again.

Reconnecting after the first time

Once you've connected your AirPods 3 to your laptop once, you don't need to repeat the pairing process. Just open the AirPods case near your laptop with Bluetooth turned on, and they'll connect automatically within a few seconds. Your laptop remembers them.

If your AirPods connect to a different device instead — like your phone — you can force them to connect to your laptop by opening the case near your laptop and waiting a few seconds. You can also go into your laptop's Bluetooth settings and click "Connect" next to AirPods 3 manually.

Troubleshooting connection problems

If your AirPods connect but sound is choppy or cuts out, move closer to your laptop. Bluetooth has a range of about 30 feet, but walls, microwaves, and other wireless devices can interfere. If you're far from your laptop or in a crowded area with lots of Bluetooth devices, move closer and try again.

If your AirPods are connected but your laptop isn't playing sound through them, check your audio output settings. On a Mac, click the volume icon in the top-right corner and make sure AirPods 3 is selected. On Windows, right-click the volume icon in the bottom-right corner, select "Open Volume mixer," and check that your AirPods are set as the default playback device.

If you need to start completely fresh, you can forget the AirPods from your laptop and pair them again. On a Mac, go to System Settings > Bluetooth, find AirPods 3, click the X next to it, and confirm. On Windows, go to Settings > Bluetooth & devices, find AirPods 3, click it, and select Remove device. Then repeat the pairing steps from the beginning.

Frequently Asked Questions

Can I use AirPods 3 with both my laptop and phone at the same time?

Your AirPods can be paired to multiple devices, but they can only play audio from one at a time. If your phone rings while you're using them with your laptop, the AirPods will switch to your phone automatically. To switch back to your laptop, open the AirPods case near your laptop or manually select them in your laptop's Bluetooth settings.

Why do my AirPods keep disconnecting from my laptop?

AirPods prioritize connecting to Apple devices like iPhones and iPads. If you have an iPhone nearby with Bluetooth on, your AirPods may disconnect from your laptop to connect to it instead. Turn off Bluetooth on your iPhone while using your laptop, or go into your AirPods settings on your iPhone and disable automatic switching.

Do I need to install any software to use AirPods 3 on Windows?

No. Windows 10 and later have built-in Bluetooth support for AirPods. You don't need to read drivers or install anything — just pair them through Settings like you would any other Bluetooth headphone.

Can I use AirPods 3 with a non-Apple laptop?

Yes. AirPods 3 work with any laptop that has Bluetooth, including Windows PCs, Chromebooks, and Linux machines. They work the same way as any standard Bluetooth headphone on those devices.

What if I forgot which laptop I paired my AirPods to?

Your AirPods remember all the devices they've been paired to. To see the list, hold your AirPods case near an iPhone or iPad, open Settings > Bluetooth, tap the info icon next to your AirPods, and scroll down to see "Connected Devices." To remove a laptop from that list, tap the X next to it.