The Basic Connection Process
Connecting AirPods to an iPad takes about two minutes and works the same way whether you have AirPods Pro, AirPods Max, or the standard AirPods. Your iPad finds them through Bluetooth, which is a wireless connection built into both devices. The first time you connect, you'll use the Settings app. After that, your AirPods will reconnect automatically whenever they're nearby and turned on.
Start by making sure your AirPods are charged and in their case. Open the case near your iPad — within a few feet — and leave it open. Your iPad will detect them and show a setup screen. If the screen doesn't appear, you can start the connection manually through Settings instead.
Key Takeaways
- Open your AirPods case near your iPad and tap the setup prompt that appears on screen, or go to Settings > Bluetooth to find them manually.
- Your iPad will ask you to name the AirPods and confirm which services you want to use, like Siri and audio sharing.
- Once connected, your AirPods will automatically reconnect to your iPad whenever they're in range and powered on.
- If your AirPods don't appear in Bluetooth settings, reset them by holding the button on the back of the case for 15 seconds until the light flashes white.
Step-by-Step Connection Using the Setup Screen
This is the fastest way to connect if you're setting up your AirPods for the first time. Open your AirPods case and hold it within a few inches of your iPad. Within seconds, a white setup card should appear on your iPad screen showing an image of your AirPods. Tap the blue "Connect" button in the bottom right corner of that card.
Your iPad will then ask you to confirm that you want to connect these AirPods. Tap "Connect" again. Next, you'll see a screen asking which services you want to use — this includes Siri (voice commands), automatic ear detection (pausing audio when you remove them), and audio sharing (letting someone else listen through their AirPods). You can turn any of these on or off. Tap "Done" when you've made your choices, and your AirPods are now connected.
Connecting Manually Through Settings
If the automatic setup screen didn't appear, you can connect through the Settings app instead. Open Settings on your iPad and tap "Bluetooth" near the top of the menu. Make sure Bluetooth is turned on — you'll see a toggle switch at the top that should be green. Your iPad will start searching for nearby Bluetooth devices.
Open your AirPods case (or just make sure they're powered on) and look for them in the list under "Other Devices." They'll show up with the name "AirPods" followed by a number, or whatever custom name you gave them. Tap on them once. Your iPad will connect and move them to the "My Devices" section at the top of the Bluetooth screen. You're now connected and ready to use them.
What to Do If Your AirPods Don't Show Up
Sometimes your AirPods won't appear in the Bluetooth list, usually because they're in pairing mode for a different device or they've lost their connection. The fix is to reset them. Locate the small button on the back of your AirPods case — it's a circular indent. Press and hold it for about 15 seconds. You'll see the light on the front of the case flash amber, then white. When it flashes white, your AirPods are reset and ready to pair.
After resetting, open the case near your iPad again and follow the connection steps above. If they still don't appear after 30 seconds, try turning your iPad's Bluetooth off and back on. Go to Settings > Bluetooth, toggle it off, wait five seconds, then toggle it back on. This refreshes your iPad's Bluetooth connection and often brings up devices that were hidden.
Switching AirPods Between Your iPad and Other Devices
Once your AirPods are connected to your iPad, they'll automatically switch to any other Apple device you own — like an iPhone or Mac — when you start playing audio on that device. You don't have to do anything. The AirPods will disconnect from your iPad and connect to whichever device is playing sound.
If you want to manually choose which device your AirPods connect to, open Control Center on your iPad by swiping down from the top right corner. Tap and hold the audio card in the bottom right. You'll see a list of your devices under "Audio" at the bottom. Tap the device you want your AirPods to connect to. This is useful if you're using multiple devices at once and want to control which one your AirPods listen to.
Troubleshooting Connection Problems
If your AirPods connect but sound is still coming from your iPad's speaker, check that you've actually selected them as the audio output. Open Control Center, tap and hold the audio card, and make sure your AirPods are highlighted under "Audio." If they're not, tap them to switch.
If your AirPods keep disconnecting, they may be too far away — Bluetooth typically works within 30 feet, but walls and interference can reduce that range. Move closer to your iPad. You can also try "forgetting" the AirPods and reconnecting them. Go to Settings > Bluetooth, find your AirPods in the list, tap the "i" icon next to them, and tap "Forget This Device." Then follow the connection steps again from the beginning.
Using AirPods Features on Your iPad
Once connected, you can use several AirPods features on your iPad. Double-tap either earbud to play or pause audio, or to set up Siri if you have that turned on. You can also adjust volume using your iPad's volume buttons, or swipe down from the top right to open Control Center and adjust volume there.
If you have AirPods Pro or AirPods Max, you can control noise cancellation and transparency mode through Control Center as well. Swipe down from the top right, tap and hold the audio card, and look for the noise control options. Tap to cycle between noise cancellation, transparency, and off. These settings are specific to your AirPods and won't affect audio on other devices.
Frequently Asked Questions
Do I have to use the setup screen, or can I just use Settings?
Either way works. The setup screen is faster if it appears, but manually connecting through Settings > Bluetooth takes only a few extra taps and gives you the same result. Use whichever method your iPad shows you first.
Why do my AirPods keep connecting to my iPhone instead of my iPad?
Apple devices prioritize the device you use most often. If you use your iPhone more, your AirPods will connect there first when you turn them on. To force them to connect to your iPad, open Control Center on your iPad, tap and hold the audio card, and select your AirPods under "Audio." They'll stay connected to your iPad until you manually switch them again.
Can I connect AirPods to an older iPad?
AirPods work with iPad Air 2 and later, iPad Pro (all models), and iPad mini 4 and later. If your iPad is older than that, it won't have the Bluetooth capability needed. Check your iPad model in Settings > General > About to see which version you have.
What if I forgot my AirPods are connected and I'm getting audio from both my iPad and another device?
Open Control Center on whichever device you don't want to use, tap and hold the audio card, and select a different audio output — like your device's speaker. This disconnects your AirPods from that device without affecting the other one.
Do I need to do anything special to connect AirPods Max to my iPad?
No, the process is identical. Open the case, wait for the setup screen, and tap Connect. AirPods Max use the same Bluetooth pairing method as regular AirPods, so all the steps above explore to them as well.