What Check Disc does and when to run it
Check Disc (also called chkdsk) is a Windows tool that scans your hard drive for errors and can fix some of them automatically. It looks for bad sectors — small areas of the drive that have stopped working properly — and for file system problems where Windows has lost track of where files are stored. Running it regularly can prevent data loss and keep your computer from slowing down as it struggles to read damaged sections.
You should run Check Disc if your computer is freezing, if files are disappearing or becoming unreadable, if you see error messages about corrupted files, or if your drive is making clicking or grinding sounds. You can also run it once or twice a year as preventive maintenance, especially if your computer is older or gets heavy use.
Key Takeaways
- Check Disc scans your hard drive for errors and can repair file system problems, but it requires a restart and takes 15 minutes to several hours depending on drive size.
- You can schedule a scan to run at the next startup through Settings, or run it when ready from Command Prompt if you have administrator access.
- The /F flag fixes errors it finds, and the /R flag locates bad sectors and recovers readable data, but /R takes much longer and should only be used if /F did not solve the problem.
- If Check Disc finds errors but cannot fix them, or if your drive is making physical sounds, the drive may be failing and you should back up your files when ready.
How to schedule Check Disc from Settings
The easiest way to run Check Disc is to schedule it for the next time your computer starts up. Open Settings (press Windows key + I), then go to System > Storage > Disk management options (or search for "Disk management" in Settings). Look for the section labeled Scan and fix or Error checking.
Click the drive you want to check — usually C: — then click Scan. Windows will tell you it needs to restart to run the full scan. Click Schedule the scan or Scan and repair drive. Your computer will restart on its own, run the scan before Windows loads (this can take 15 minutes to several hours depending on drive size), and then boot normally. You will see a report when you log back in, though it may be brief.
This method is safest because Windows is not running while the scan happens, so Check Disc can access every part of the drive. It also means you do not need to type commands or use administrator mode.
How to run Check Disc from Command Prompt
If you need to run Check Disc when ready without restarting, you can use Command Prompt, but it will only scan — not repair — while Windows is running. Press Windows key + X and select Terminal (Admin) or Command Prompt (Admin). If you see a prompt asking for permission, click Yes.
Type this command and press Enter:
chkdsk C: /F
Replace C: with the drive letter you want to check if it is different. The /F flag tells Check Disc to fix errors. Windows will tell you it cannot fix the drive while it is in use and ask if you want to schedule the scan for the next restart. Type Y and press Enter. Your computer will restart the next time you shut it down or restart.
If you want to check for bad sectors as well as file system errors — a slower but more thorough scan — use /R instead of /F:
chkdsk C: /R
The /R flag finds bad sectors and recovers data from them. It takes much longer (often several hours for a large drive) and should only be used if the /F scan did not solve your problem.
What the scan results mean
When Check Disc finishes, it will show you a report. Look for lines that say bad sectors found and repaired or errors found and fixed. If you see these, the scan worked and your drive should run better. If the report says no errors found, your drive is healthy.
If the report says bad sectors found but not repaired or errors found but not fixed, it means Check Disc found problems but could not repair them. This usually means the drive itself is failing. You should back up your important files to an external drive or cloud storage when ready, because the drive may stop working without warning.
If Check Disc keeps finding the same errors after multiple scans, or if your computer is still freezing or losing files after a successful scan, the problem may not be the hard drive — it could be a failing solid-state drive (SSD), a memory problem, or corrupted Windows files. In that case, consider having a technician look at the computer.
The difference between /F and /R
/F (fix) checks the file system — the part of your drive that keeps track of where files are stored. It is fast, usually taking 15 to 45 minutes, and fixes most common problems. Use this first.
/R (repair) locates bad sectors and tries to recover data from them. It is much slower, often taking 2 to 8 hours depending on drive size, and should only be used if /F did not solve the problem or if you are getting errors about unreadable files. Do not use /R unless you have time to let your computer run uninterrupted.
You can also use both flags together — chkdsk C: /F /R — but this will take the full time of the /R scan. There is no reason to do both unless you are specifically told to by a technician.
When Check Disc is not the right tool
Check Disc only works on traditional hard drives (HDD). If your computer has a solid-state drive (SSD), Check Disc will run but may not be helpful, because SSDs fail differently and do not have bad sectors in the same way. If you have an SSD and it is running slowly or showing errors, the problem is usually that the drive is wearing out and needs to be replaced.
Check Disc also cannot fix problems caused by viruses, malware, or corrupted Windows system files. If your computer is infected or Windows itself is damaged, running Check Disc will not help. In those cases, you may need to run a malware scan or repair Windows using the built-in recovery tools.
If your drive is making clicking, grinding, or beeping sounds, do not run Check Disc — the drive is likely failing physically and running the scan may make it worse. Turn off the computer when ready and back up your files using an external drive connected to another computer.
Frequently Asked Questions
How long does Check Disc take?
The /F scan usually takes 15 to 45 minutes. The /R scan takes 2 to 8 hours depending on drive size and how many bad sectors it finds. Larger drives and older drives take longer. You can use your computer while the scan is scheduled but not yet running — it will only run at the next startup.
Can I stop Check Disc once it has started?
You can press Escape or Ctrl+C to stop it, but this is not recommended because it may leave the scan incomplete. If you must stop it, let it finish the current phase first. If Check Disc is running at startup and you restart your computer during the scan, it will resume from where it left off the next time you start up.
Do I need to run Check Disc if I have an SSD?
Check Disc will run on an SSD but is not very useful, because SSDs do not develop bad sectors like traditional hard drives do. If your SSD is running slowly or showing errors, the drive is likely wearing out and needs replacement. Check your SSD manufacturer's website for their own diagnostic tool instead.
What if Check Disc says it found errors but my computer seems fine?
Small file system errors can exist without causing noticeable problems yet. Running Check Disc and letting it fix them prevents those errors from getting worse and causing slowdowns or data loss later. It is worth doing even if you have not noticed problems.
Can Check Disc recover deleted files?
No. Check Disc repairs the file system and recovers data from bad sectors, but it cannot recover files you have deleted. If you need to recover deleted files, you need a different tool like Recuva or EaseUS Data Recovery. The sooner you use it after deletion, the better your chances of recovery.