When and why to reset your BIOS to defaults

Resetting your BIOS (the firmware that runs before your operating system loads) to factory defaults solves problems caused by incorrect settings you or someone else changed. Common reasons include a computer that won't start, random crashes, or settings that are preventing hardware from working. If you recently changed BIOS settings and your machine became unstable, a reset often fixes it faster than troubleshooting each setting individually.

A BIOS reset does not erase your files, programs, or Windows installation. It only returns the firmware settings to what the manufacturer set them to. This is different from a factory reset of Windows, which removes everything. Your data stays intact.

You should reset BIOS only if you know something in there was changed, or if you are following specific troubleshooting steps from a technician or manufacturer. If your computer is working fine, there is no reason to touch BIOS at all.

Key Takeaways

  • A BIOS reset returns only the firmware settings to factory defaults and does not affect your files, programs, or Windows installation.
  • The three main methods are using a BIOS menu option (safest), removing the CMOS battery (most reliable if the menu is locked), or using a jumper on the motherboard (requires opening the case).
  • You must restart your computer and enter BIOS setup during startup, usually by pressing Delete, F2, F10, or F12 depending on your manufacturer.
  • After a reset, you may need to re-enter the date and time, and check that hardware like drives and RAM are still recognized.

How to enter BIOS setup on your computer

Before you can reset BIOS, you need to get into the BIOS setup menu. Shut down your computer completely, then turn it back on. As soon as it starts (before Windows loads), watch the screen for a message telling you which key to press. The key varies by manufacturer: Dell and Lenovo often use F2, HP and Compaq use F10, ASUS uses Delete, and some older systems use F12 or F1. You have only a few seconds, so you may need to restart and try again if you miss it.

If you do not see a message, try pressing the most common key for your brand. If that does not work, search online for "[your computer model] enter BIOS" to find the exact key. Once you press the right key, the BIOS setup screen will appear. It looks different depending on your manufacturer, but it will show options like System Information, Boot, Security, and Advanced Settings.

Resetting BIOS from the setup menu (easiest method)

Once you are in the BIOS setup menu, look for an option called "Reset to Default," "Load Setup Defaults," "Restore Defaults," or "Load Optimal Defaults." The exact name and location depend on your manufacturer. In most BIOS menus, this option is in the main menu or under an "Exit" tab at the top or bottom of the screen.

Select the reset option and confirm when the menu asks if you are sure. The BIOS will return all settings to factory defaults. Then look for an option to "Save and Exit" or "Exit and Save Changes." Your computer will restart automatically. This method is safest because you are using the manufacturer's built-in reset function and you do not have to open your computer.

Removing the CMOS battery (most reliable method)

If you cannot find a reset option in the BIOS menu, or if the BIOS is password-protected and you cannot access it, you can reset BIOS by removing the small coin-shaped battery on the motherboard. This battery powers the CMOS chip, which stores BIOS settings. When you remove it, the settings are lost and revert to defaults when you put the battery back.

To do this, shut down your computer and unplug the power cable. Open the case (usually by removing the side panel held by two screws or latches). Locate the CMOS battery on the motherboard—it is a round, flat, silver battery about the size of a dime, often labeled "CR2032" or similar. Gently pry it out with a plastic tool or your fingernail. Wait 10 to 30 seconds, then press it back in firmly until it clicks. Close the case, plug in the power cable, and restart your computer.

After restart, you may see a message saying "CMOS checksum error" or "CMOS battery low." This is normal and expected. The computer is telling you that the BIOS settings have been reset. Press a key to continue, and the system will boot normally. You may need to re-enter the date and time in BIOS.

Using the motherboard jumper (for advanced users)

Some motherboards have a jumper—a small plastic connector on three metal pins—that can reset BIOS when moved to a different position. This method requires opening the case and locating the jumper, which is usually labeled "CLR_CMOS," "CLEAR CMOS," or "PSWD" on the motherboard. Consult your motherboard manual to find its exact location, as it varies widely.

Shut down and unplug your computer, then open the case. Locate the jumper and note which two of the three pins it is currently connected to. Move the jumper to the other two pins for 10 to 15 seconds, then move it back to its original position. Close the case, plug in the power, and restart. The BIOS will be reset to defaults.

This method is less common on newer computers and is usually only needed if the CMOS battery method does not work or if the battery is soldered to the motherboard and cannot be removed. If you are not comfortable opening your computer or locating the jumper, the battery method or a professional technician is a safer choice.

What to check after a BIOS reset

After your computer restarts following a BIOS reset, it should work normally. However, a few things may need attention. The date and time will likely be wrong—set them in BIOS or in Windows Settings. Check that your hard drive, SSD, and RAM are still recognized in BIOS (look for a System Information or Main menu option that lists hardware). If any hardware is missing, restart and enter BIOS again; sometimes it takes a second boot for the system to fully recognize everything.

If you had disabled certain hardware features in BIOS before the reset (such as USB ports or onboard audio), they will now be enabled again. If you need them disabled, you will have to turn them off again. Boot into Windows and verify that all your programs and files are still there—they should be, since a BIOS reset does not touch your storage.

When a BIOS reset does not solve the problem

If your computer still will not start or crashes after a BIOS reset, the problem is likely not in BIOS settings. Hardware failure, a corrupted Windows installation, or a virus could be the cause. Try booting from a Windows installation USB to see if Windows loads (which would suggest a hard drive problem). If the computer does not respond at all, the issue may be a failed power supply, motherboard, or CPU—situations where you need professional repair.

If you reset BIOS because of crashes or instability and the problem continues, document what happens (error messages, when it crashes, what you were doing) and contact the computer manufacturer's support or a local technician with that information. They can help narrow down whether the issue is hardware or software.

Frequently Asked Questions

Will resetting BIOS delete my files or programs?

No. A BIOS reset only changes firmware settings and does not touch your hard drive, SSD, or anything stored on them. Your files, programs, and Windows installation remain exactly as they were. Only the date, time, and any custom BIOS settings you or someone else made will change.

What if I do not remember what BIOS settings I changed?

If you do not know what was changed, a full reset to defaults is the safest approach. Write down or take a photo of the current BIOS settings before you reset, in case you need to restore a specific setting later. Most of the time, the default settings work fine for normal computer use.

Can I reset BIOS if my computer will not turn on at all?

If the computer will not power on, a BIOS reset will not help because the problem is likely hardware-related (power supply, motherboard, or CPU). However, if it powers on but will not boot into Windows, you can still enter BIOS and reset it using the methods described above.

Do I need to reset BIOS if I just want to speed up my computer?

No. A BIOS reset returns settings to defaults, which are usually already optimized for normal use. If your computer is slow, the problem is more likely Windows settings, too many startup programs, a full hard drive, or malware. Focus on those areas first before touching BIOS.

What if the CMOS battery is soldered to the motherboard?

On some newer laptops and compact computers, the CMOS battery is soldered permanently to the motherboard and cannot be removed. In that case, use the BIOS menu reset option if available, or contact the manufacturer for a professional reset. Some manufacturers offer a jumper or a specific key combination to reset BIOS in this situation.