What a disk check does and why you need it
A disk check is a tool that scans your hard drive or solid-state drive for errors — bad sectors, corrupted files, and problems with how Windows or macOS organizes data. When your computer slows down, freezes, or won't start, a disk error is often the cause. Running a disk check finds these problems before they force you to replace the drive or lose files.
Think of it like a health scan for your storage. The tool reads every part of the drive, tests whether data is stored correctly, and reports what it finds. On Windows, the tool is called Check Disk. On Mac, it's called Disk Utility. Both are built into your operating system and cost nothing to run.
You do not need to run a disk check every week. Run it when your computer starts acting wrong — when it takes forever to open files, crashes without warning, or shows a message about a disk error. You should also run one after a power failure or if your computer shut down unexpectedly.
Key Takeaways
- Windows Check Disk and Mac Disk Utility are built-in tools that scan your drive for errors at no cost.
- On Windows, you can run a quick scan from Settings without restarting, or schedule a full scan that runs at startup.
- On Mac, Disk Utility checks your drive from Recovery Mode, which you reach by restarting and holding Command-R.
- A full disk check takes 10 minutes to several hours depending on drive size and how many errors exist.
- If the scan finds errors it cannot fix, back up your files and contact a technician or consider replacing the drive.
Running Check Disk on Windows 10 and 11
The fastest way to start a disk check on Windows is through Settings. Open Settings, go to System, then select Storage. Scroll down and click "Disk and volume management," then find your main drive (usually labeled C:) and click it. At the top, you will see an option that says "Scan." Click it. Windows will run a quick scan that takes a few minutes and does not require a restart.
A quick scan checks only the parts of the drive that Windows uses most often. If the quick scan finds nothing wrong, you are done. If it finds errors or if your computer is still having problems, you need a full scan. To run a full scan, right-click on the drive in File Explorer, select Properties, go to the Tools tab, and click "Check." Windows will ask whether you want to scan and fix errors. Click "Scan drive." This scan requires a restart and runs the next time you start your computer. It will take 10 minutes to an hour depending on your drive size.
While the full scan runs at startup, you will see a progress bar on a black screen. Do not turn off your computer or unplug it. Let the scan finish completely. When it is done, Windows will show you a report of what it found and fixed, then boot normally.
Running Disk Utility on Mac
On a Mac, you reach Disk Utility through Recovery Mode. Restart your Mac and hold down Command-R as soon as you hear the startup sound or see the Apple logo. Keep holding until you see the macOS Utilities window. Click Disk Utility, then click Continue.
In Disk Utility, you will see a list of drives on the left side. Click your main drive (usually named "Macintosh HD" or similar), then click the First Aid button at the top. Disk Utility will scan your drive and fix errors automatically. The scan takes 5 to 30 minutes depending on drive size. You will see a progress bar and a log of what the tool is checking.
When First Aid finishes, it will show you a summary. If it says "The volume appears to be OK," your drive is healthy. If it found and fixed errors, the summary will list them. If it found errors it could not fix, you will see a message saying the drive needs service. In that case, back up your files to an external drive or cloud storage, then contact Apple or a Mac technician.
What to do if errors are found
If Check Disk on Windows or First Aid on Mac finds errors and fixes them, your computer should run better. Errors usually come from sudden power loss, a crash, or a drive that is starting to fail. One round of repairs often solves the problem.
If the scan finds errors it cannot fix, or if you run the scan again a week later and it finds new errors, your drive is likely failing. Drives fail gradually — they do not usually stop working all at once. If the tool says the drive needs service, back up everything important to an external hard drive or cloud storage (Google Drive, OneDrive, iCloud) before the drive fails completely. Then contact a technician or consider replacing the drive. A new drive costs $50 to $200 depending on size and speed, and a technician can transfer your files to it.
Scheduling regular scans without waiting for problems
You can set Windows to run a disk check on a schedule so you catch problems early. Open Task Scheduler by typing "Task Scheduler" into the Windows search box. In the left panel, navigate to Microsoft > Windows > Chkdsk. Right-click the task and select Properties. You can set it to run weekly or monthly. Most people choose monthly, which is often enough to catch problems without slowing down your computer.
On Mac, there is no built-in scheduler for Disk Utility, but you can run First Aid manually every month or two. Many people do this when they restart their Mac for updates anyway — just hold Command-R during startup and run the scan while you wait for the update to finish installing.
How long a disk check takes and what to expect
A quick scan on Windows takes 2 to 5 minutes. A full scan takes 10 minutes on a small or fast drive, and up to an hour or more on a large or slow drive. Older drives and drives with many errors take longer because the tool has to read and test every sector.
On Mac, First Aid usually takes 5 to 30 minutes. If your drive is very large (over 1 TB) or very full, it may take longer. During the scan, you will see a progress bar and a log showing what the tool is checking. Do not interrupt the scan — let it finish completely even if it seems to be taking a long time.
If you are running a full scan on Windows at startup, your computer will be unavailable until the scan finishes. Plan to run it when you do not need your computer for a while — overnight or before you leave for work is a good time.
Frequently Asked Questions
Can I use my computer while a disk check is running?
No. A quick scan on Windows runs in the background and you can use your computer, but a full scan requires a restart and locks your computer until it finishes. On Mac, First Aid runs in Recovery Mode, so your computer is not available. Plan to run a full scan when you do not need your computer.
What does it mean if the scan says "The volume appears to be OK"?
It means no errors were found. Your drive is healthy and working normally. You do not need to do anything else. If your computer is still slow or freezing, the problem is something other than disk errors — possibly too many programs running at startup, not enough free space, or malware.
Do I need to back up my files before running a disk check?
No. A disk check only reads and tests your drive; it does not delete files. However, if the scan finds errors it cannot fix, you should back up your files afterward because the drive may be failing. If you have not backed up in a while, it is a good idea to do so before running a full scan, just in case.
What if the disk check keeps finding the same errors?
Repeated errors mean your drive is failing. Back up your important files to an external drive or cloud storage right away. Then contact a technician or plan to replace the drive soon. Do not wait — a failing drive can stop working suddenly and you could lose everything.
Is there a difference between Check Disk and Defrag?
Yes. Check Disk finds and fixes errors on the drive itself. Defrag reorganizes files so your computer can read them faster. On modern solid-state drives (SSDs), defrag is not needed and can actually shorten the drive's life. Check Disk is useful on both SSDs and older hard drives.