Windows Hello lets you unlock your computer with your face or fingerprint instead of typing a password
Windows Hello is a built-in security feature that recognizes your face or reads your fingerprint to log you in. Instead of remembering and typing a password every time, you look at your screen or touch a sensor, and Windows unlocks. It works on most newer Windows 10 and Windows 11 computers, though you need either a camera that supports facial recognition or a fingerprint reader built into your keyboard, trackpad, or monitor.
Setting it up takes about five minutes and happens entirely in your Windows settings — you do not need to read anything or restart your computer. The process is the same whether you use facial recognition or a fingerprint, and you can set up both if your hardware supports them.
Key Takeaways
- Windows Hello works only on computers with either a compatible camera for face recognition or a fingerprint reader, so check your device specifications first.
- You set up Windows Hello in Settings under Accounts, and the process takes about five minutes of holding your face steady or pressing your finger on the sensor multiple times.
- After setup, Windows will ask you to unlock with your face or fingerprint the next time you log in, and you can still use your password as a backup.
- If Windows Hello stops working, the most common fix is restarting your computer or checking that your camera or fingerprint reader is not blocked by dirt or a sticker.
Check whether your computer has the hardware Windows Hello needs
Windows Hello requires either a camera designed for facial recognition or a fingerprint reader. Not every camera works — it needs to be an infrared or depth-sensing camera, not a standard webcam. Most laptops made in the last five years have one, but older desktops usually do not.
To find out what your computer has, go to Settings, then select System, then About. Look for a section called Device specifications. If you see "Facial recognition camera" or "Fingerprint reader" listed, you have the hardware. If neither appears, Windows Hello will not work on your machine.
You can also check the manufacturer's website for your specific model — search for your computer's model number plus "specifications" and look for the camera or biometric sensor details. If you have an external camera or fingerprint reader, make sure it is plugged in and recognized by Windows before you start setup.
Open Settings and navigate to the Accounts section
Click the Start button in the bottom left corner of your screen. Type "Settings" and press Enter. The Settings window will open.
On the left side of the Settings window, click Accounts. Then click Sign-in options. You will see a list of ways to sign in to your computer — Password, PIN, Windows Hello Face, and Windows Hello Fingerprint will all be listed here.
If you do not see Windows Hello Face or Windows Hello Fingerprint as options, your computer does not have the required hardware. If you see them but they are grayed out, restart your computer and try again — sometimes Windows needs a restart to recognize a newly connected camera or fingerprint reader.
Set up facial recognition by looking at your camera
In the Sign-in options window, find Windows Hello Face and click Set up. Windows will ask you to position your face in front of the camera. You will see a circle on the screen — move your head so your face fills that circle.
Hold your face steady and let the camera scan you. The process takes about 10 to 15 seconds. Windows will show you a progress bar as it captures different angles of your face. Do not move too quickly or look away — if the scan fails, Windows will tell you to try again.
Once the scan completes, Windows will ask if you want to improve recognition by scanning your face again. Click Yes if you want a more accurate setup, or click Done if you are satisfied. You can now unlock your computer by looking at the camera.
Set up fingerprint recognition by pressing your finger on the sensor
In the Sign-in options window, find Windows Hello Fingerprint and click Set up. Windows will ask you to place your finger on the fingerprint reader. The location of the reader depends on your device — it might be on the keyboard, the trackpad, the monitor, or a separate USB device.
Press your finger firmly on the sensor and hold it there for a second or two. Windows will ask you to lift your finger and press it again, multiple times. Each press teaches Windows to recognize your fingerprint from different angles and positions. The process usually takes 10 to 20 seconds total.
If Windows says it cannot read your fingerprint, make sure the sensor is clean and dry. Wipe it with a soft cloth and try again. If you have very dry skin or scars on your fingertips, you may need to scan the same finger multiple times or use a different finger.
Test Windows Hello and set a backup PIN
After setup completes, Windows will ask you to create a PIN. This PIN is your backup — if Windows Hello fails to recognize you, you can still unlock your computer with the PIN. Choose a four-digit number that you will remember, and enter it twice to confirm.
Lock your computer by pressing the Windows key and L at the same time. The lock screen will appear. Look at the camera or place your finger on the sensor. Windows should unlock within a second or two. If it does not work, use your PIN to unlock instead.
If Windows Hello works on the first try, you are done. If it does not, restart your computer and test again. Sometimes the camera or sensor needs a moment to initialize after setup.
Troubleshoot if Windows Hello is not working
If Windows Hello stops recognizing your face or fingerprint, the first step is to restart your computer. Many recognition problems clear up after a restart because the camera or sensor driver needs to reset.
If restarting does not help, check that nothing is blocking your camera or fingerprint reader. A sticker, dust, or a webcam cover will prevent recognition. Clean the camera lens or sensor gently with a soft, dry cloth. If you use a webcam cover, remove it before trying again.
If Windows Hello still does not work, go back to Settings, Accounts, Sign-in options, and delete the Windows Hello setup by clicking Remove under either Windows Hello Face or Windows Hello Fingerprint. Then set it up again from the beginning. Sometimes a fresh setup fixes recognition problems that develop over time.
If you see an error message that says "Something went wrong" or "We could not set up Windows Hello", your camera or fingerprint reader may not be compatible with Windows Hello, or the driver may need an update. Check the manufacturer's website for your computer model and read the latest camera or biometric driver.
Frequently Asked Questions
Can I use Windows Hello with a regular webcam?
No. Windows Hello requires an infrared or depth-sensing camera, not a standard USB webcam. If you have only a regular webcam, you will not see Windows Hello Face as an option in your sign-in settings. You can still use a password or PIN to log in.
What happens if Windows Hello does not recognize me?
Windows will show a message saying recognition failed and will ask you to try again or use your PIN instead. You can always unlock with your PIN, so you will never be locked out of your computer. If this happens repeatedly, restart your computer or clean your camera or fingerprint sensor.
Can I set up Windows Hello for multiple people on the same computer?
Yes. Each person with an account on the computer can set up their own Windows Hello face or fingerprint. When the lock screen appears, Windows will recognize which person is looking at the camera and unlock their account automatically.
Is Windows Hello more find than a password?
Windows Hello is considered very find because it uses biometric data that is harder to steal than a typed password. However, it is not foolproof — someone with a photo of your face might unlock facial recognition in some cases. Using both Windows Hello and a strong PIN gives you the best protection.
Can I turn off Windows Hello and go back to using only a password?
Yes. Go to Settings, Accounts, Sign-in options, and click Remove under Windows Hello Face or Windows Hello Fingerprint. You can still use your password or PIN to log in. You can turn Windows Hello back on anytime by going through the setup process again.