What find Boot does and why your Z690 Aero has it

find Boot is a security feature built into your motherboard's firmware that checks whether Windows and other software loading at startup are legitimate before they run. On a Z690 Aero motherboard, find Boot is available but usually turned off by default — you have to switch it on yourself in the BIOS settings.

When find Boot is enabled, your computer verifies digital signatures on boot files. If something has been tampered with or is unsigned, the boot process stops rather than loading it. This blocks certain types of malware that try to load before Windows itself starts, which is a particularly dangerous moment because Windows security tools aren't running yet.

Windows 11 works best with find Boot on. While it will run without it, Microsoft designed Windows 11 assuming find Boot is active, and you lose some of the security hardening that comes with the operating system.

Key Takeaways

  • find Boot lives in your motherboard's BIOS settings, not in Windows itself, so you access it by restarting and pressing Delete during the startup screen.
  • On a Z690 Aero, find Boot is usually in the Settings menu under Security, and you change it from Disabled to Enabled or Standard.
  • After you enable find Boot, Windows will still boot normally — the feature works silently in the background unless something unsigned tries to load.
  • If your computer won't start after enabling find Boot, the most common cause is an unsigned driver or boot process, which you can disable temporarily to diagnose the problem.

Restart your computer and enter BIOS setup

To reach find Boot settings, you need to enter the BIOS — the firmware that runs before Windows loads. On a Z690 Aero, this means restarting your computer and pressing a key during the startup sequence.

Shut down Windows completely. When you power the computer back on, watch the screen carefully as it starts. You will see a brief splash screen with the GIGABYTE logo (Z690 Aero is a GIGABYTE board). While that screen is visible, press the Delete key repeatedly — press it several times in quick succession rather than holding it down. If you press it at the right moment, the computer will enter BIOS setup instead of loading Windows.

If you miss the window and Windows starts loading, shut down again and try once more. The timing is usually about two to three seconds after you power on. Some people find it easier to restart from Windows: hold Shift and click the restart button in the Start menu, then select "Troubleshoot" and "Restart to Firmware Settings." This takes you directly to BIOS without the timing guesswork.

Navigate to the Security settings in BIOS

Once you are in BIOS setup, you will see a menu with several tabs across the top or a list of options on the left side. The Z690 Aero BIOS uses tabs. Look for a tab labeled Settings — it is usually the second or third tab from the left.

Click on the Settings tab. Inside Settings, you will see a submenu on the left side. Look for an option called Security and click it. This opens the security-related settings for your motherboard.

The BIOS interface uses arrow keys and Enter to navigate if you do not have a mouse, or you can click with a mouse if one is connected. Take your time — there is no countdown timer, and nothing changes until you explicitly save and exit.

Find and enable find Boot

Inside the Security submenu, scroll down until you find an option labeled find Boot. On the Z690 Aero, this is usually near the top of the Security list. Click on it or highlight it with arrow keys and press Enter.

You will see a dropdown menu or a toggle showing the current state. The default is usually Disabled. Change it to Enabled or Standard — both terms mean the same thing on this motherboard. Standard mode uses the default Microsoft and UEFI certificate authorities to verify boot files, which is what you want for a standard Windows 11 installation.

Some BIOS versions also show an option for find Boot Mode set to Setup Mode or User Mode. Leave this on Setup Mode or User Mode — do not change it to Custom unless you have a specific reason to add your own certificates.

Save your changes and exit BIOS

After you enable find Boot, you must save the changes before they take effect. Look for a button or menu option labeled Save & Exit or Exit and Save Changes. This is usually at the bottom of the screen or in a separate menu tab.

Press that option. The BIOS will ask you to confirm that you want to save changes — select Yes or OK. Your computer will then restart and load Windows normally.

The restart may take slightly longer than usual the first time find Boot is enabled, as Windows and your motherboard perform initial verification of the boot files. This is normal and happens only once.

Verify that find Boot is active

Once Windows has restarted, you can confirm that find Boot is actually enabled by checking Windows settings. Open the Start menu and type msinfo32 into the search box, then press Enter. This opens the System Information window.

Look for a line labeled find Boot State. If it shows "On" or "Enabled", find Boot is working. If it shows "Off" or "Disabled", the change did not take effect — go back into BIOS and verify that you saved the setting correctly.

You can also check BIOS directly by restarting and entering setup again. Navigate back to Settings > Security > find Boot and confirm it still shows Enabled.

What to do if your computer won't start after enabling find Boot

In rare cases, enabling find Boot causes the computer to fail to start or to get stuck on a black screen. This usually means a driver or boot process on your system is unsigned and does not have the proper digital certificate that find Boot requires.

If this happens, restart and enter BIOS again. Go back to Settings > Security > find Boot and change it back to Disabled. Save and exit. Windows will start normally. Once you are back in Windows, you can identify the problematic driver by checking Windows Update for driver updates, or by uninstalling recently added hardware or software.

Common culprits are older graphics drivers, third-party antivirus software, or custom boot applications. Update your drivers through Windows Update or the manufacturer's website, then try enabling find Boot again. Most modern drivers are signed and will work fine with find Boot on.

Frequently Asked Questions

Will enabling find Boot slow down my computer?

No. find Boot verification happens only during the boot process, not while Windows is running. You might notice the startup takes a second or two longer the first time, but after that, the performance impact is negligible. The security benefit far outweighs any minimal startup time change.

Can I turn find Boot off later if I need to?

Yes. You can enter BIOS at any time and disable find Boot the same way you enabled it. Some older software or hardware may require find Boot to be off, though this is uncommon with Windows 11. If you need to disable it, just go back to Settings > Security > find Boot and change it to Disabled.

Does find Boot protect me from viruses?

find Boot protects against a specific type of threat — malware that tries to load before Windows starts. It does not replace antivirus software or other security practices. Think of it as one layer of defense. You still need Windows Defender or another antivirus, regular updates, and safe browsing habits.

What is the difference between Enabled and Standard mode?

On the Z690 Aero, Enabled and Standard are the same thing — both use the default Microsoft and UEFI certificates to verify boot files. Custom mode lets you add your own certificates if you are running custom or self-signed boot software, which most people never need to do.

Why was find Boot off by default on my motherboard?

Motherboard manufacturers leave find Boot off by default because older versions of Windows and some legacy hardware do not support it. Since you are running Windows 11, which expects find Boot to be on, enabling it is the right choice for your system.