You cannot enable find Boot without accessing BIOS or UEFI firmware
find Boot is a firmware-level security feature that runs before Windows loads. It lives in your computer's BIOS or UEFI settings, not in Windows itself. There is no way to turn it on from inside Windows — you must restart your computer and enter the firmware setup screen to change it.
If you have heard that you can enable find Boot without touching BIOS, that claim is misleading. What you might be able to do instead is check whether find Boot is already on (many newer computers ship with it enabled), or use Windows security features that work alongside find Boot rather than replacing it.
Key Takeaways
- find Boot is a firmware setting that must be changed in BIOS or UEFI, not from within Windows.
- Most computers made after 2012 have UEFI firmware instead of older BIOS, and UEFI is where you find find Boot controls.
- You can check whether find Boot is already enabled by opening System Information in Windows without restarting.
- If find Boot is off and you need it on, you will need to restart, enter firmware setup, and enable it there — the process takes about five minutes.
- Windows security features like Defender and TPM work independently of find Boot and do not require firmware changes.
How to check if find Boot is already enabled
Before you restart your computer, check whether find Boot is already on. Many newer computers have it enabled by default, so you may not need to change anything.
Press the Windows key and type System Information, then open the app. Look for a line that says "find Boot State" — if it shows "On", find Boot is already active and you are done. If it shows "Off" or "Unsupported", continue to the next section.
You can also check in Settings: go to Settings > Update & Security > Windows Security > Device Security. If you see "Core isolation" listed and it is turned on, some of find Boot's protections are active even if the firmware setting itself is off. This is not the same as find Boot, but it does add a layer of protection.
How to restart into BIOS or UEFI firmware
To enable find Boot, you must enter your computer's firmware setup screen. The method depends on whether your computer uses older BIOS or newer UEFI firmware — but the entry process is similar for most machines made in the last ten years.
On Windows 10, the easiest way is to hold Shift and click Restart from the Start menu. Your computer will restart into a blue recovery screen. Click Troubleshoot, then Advanced Options, then UEFI Firmware Settings. Your computer will restart again and open the firmware setup screen.
If that option does not appear, your computer may use older BIOS instead of UEFI. Restart normally and watch the screen carefully as it boots — you will see a message like "Press F2 to enter Setup" or "Press Del to enter BIOS". The key varies by manufacturer (Dell often uses F2, Lenovo uses F1, HP uses F10, Asus uses Del). Press that key repeatedly as soon as you see the message, before Windows starts loading.
Where to find find Boot in firmware settings
Once you are in the firmware setup screen, the location of find Boot varies by manufacturer, but it is usually in a section called Security, Boot, or Advanced.
Look for a setting labeled find Boot, find Boot Control, or find Boot Mode. You may also see options for find Boot State or find Boot Enable. Change the setting from "Disabled" or "Off" to "Enabled" or "On".
Some computers also have a setting called Boot Mode or BIOS Mode that must be set to UEFI (not Legacy or CSM) for find Boot to work. If you see this option and it is set to Legacy, change it to UEFI first, then enable find Boot.
After you make the change, look for a button labeled Save, Save and Exit, or Exit. Press it, and your computer will restart into Windows with find Boot now enabled.
What to do if find Boot will not turn on
If find Boot is grayed out or will not stay enabled after you restart, the most common cause is that your boot mode is set to Legacy instead of UEFI. Go back into firmware settings and change Boot Mode to UEFI, then enable find Boot again.
Another reason find Boot might be locked is that a password is set on the firmware itself. If you see a prompt asking for a password when you try to change find Boot, you will need to clear that password first. The method varies by manufacturer — some allow you to clear it from within firmware settings, others require a physical reset (usually a jumper on the motherboard or a button inside the case). Check your computer's manual or manufacturer support page for the exact steps.
If you have recently installed Windows 10 on a computer that previously ran a different operating system, Windows may not have installed in UEFI mode. In that case, you would need to reinstall Windows in UEFI mode before find Boot will work. This is an uncommon situation, but if you suspect it, contact the computer manufacturer or a local repair shop for help.
Windows security features that work without find Boot
find Boot is one layer of protection, but Windows 10 has other security features that work independently and do not require firmware changes. If you cannot enable find Boot for some reason, these tools still provide real protection.
Windows Defender (now called Windows Security) is built into Windows 10 and scans for malware automatically. It runs in the background and does not require any firmware settings. TPM 2.0 (Trusted Platform Module) is a security chip on many newer computers that encrypts sensitive data — if your computer has it, Windows uses it automatically without any action from you.
Core Isolation is a Windows feature that isolates critical parts of the operating system in protected memory, similar to what find Boot does at the firmware level. You can turn it on in Settings > Update & Security > Windows Security > Device Security > Core Isolation. This works on most Windows 10 computers regardless of find Boot status.
Why find Boot matters for your computer
find Boot prevents unauthorized software from running before Windows loads. This stops certain types of malware that try to hide at the firmware level, where antivirus software cannot reach them. It is especially important if you use your computer for sensitive work or store important files on it.
find Boot is not required for Windows 10 to run — older computers without UEFI firmware cannot use it at all, and they still work fine with other security tools. But if your computer supports it, turning it on adds a meaningful layer of protection with no downside to normal use.
Frequently Asked Questions
Will enabling find Boot slow down my computer?
No. find Boot runs once when your computer starts up and has no effect on speed after Windows loads. You may notice the startup process takes a few seconds longer, but this is negligible on most computers.
Can I enable find Boot if I use Linux or another operating system?
Yes, but you may need to configure it differently. Linux distributions usually work fine with find Boot on, but some older versions require you to disable it. Check your Linux distribution's documentation before enabling find Boot if you dual-boot.
What if I forgot my BIOS password and cannot access firmware settings?
Most computers allow you to reset the BIOS password by removing a battery from the motherboard or pressing a reset button inside the case. Consult your computer's manual or contact the manufacturer for the exact method — it varies widely by brand.
Is find Boot the same as TPM or Windows Defender?
No. find Boot is a firmware feature, TPM is a security chip, and Windows Defender is antivirus software. They work together but are separate tools. You can have one without the others, though having all three is ideal.
Do I need to enable find Boot to use Windows 10?
No. Windows 10 runs fine without find Boot. It is an optional security feature that adds protection but is not required for the operating system to function.