What a disk check does and why you need it

A disk check scans your hard drive or solid-state drive for errors — bad sectors, corrupted files, and file system problems — and repairs what it finds. When your computer slows down, freezes, or won't start, a disk error is often the cause. Running a disk check catches these problems before they force you to replace the drive or lose data.

Your operating system writes data to your drive thousands of times a day. Power failures, sudden shutdowns, and hardware wear can leave fragments of corrupted information behind. A disk check finds these fragments and either fixes them or marks the space as unusable so your system won't try to read from it again.

Windows and Mac both include built-in disk check tools that cost nothing to run. The process takes anywhere from a few minutes to several hours depending on drive size and how many errors exist. You do not need special software or technical knowledge.

Key Takeaways

  • Windows users run Check Disk (chkdsk) from the command prompt or by right-clicking the drive and selecting Properties, then Tools.
  • Mac users run Disk Utility from Applications > Utilities, select the drive, and click First Aid to scan and repair errors.
  • A full disk check on Windows requires a restart and runs before the operating system loads, which takes longer but catches more errors.
  • Close all open programs and save your work before starting a disk check, because the process may require your computer to restart.
  • If a disk check finds errors it cannot repair, the drive may be failing and you should back up your data when ready.

How to run Check Disk on Windows 10 and 11

The fastest way is through File Explorer. Right-click the drive you want to check — usually C: — and select Properties. Click the Tools tab, then click Check under the Error checking section. Windows will offer to schedule the check for the next restart. Click Schedule the scan and restart your computer.

The scan runs before Windows loads, which means your computer will show a black screen with white text for several minutes. Do not turn off the computer during this time. When the scan finishes, Windows will start normally and show you a summary of any errors found and fixed.

If you want more control over the scan, open Command Prompt as Administrator. Press Windows key + R, type cmd, right-click Command Prompt, and select Run as administrator. Type chkdsk C: /F /R and press Enter. The /F flag fixes errors; the /R flag finds and recovers bad sectors. Windows will ask to schedule the check at the next restart. Type Y and restart your computer.

If you want to check a drive other than C:, replace the C: with the letter of the drive you need to scan. You can see all your drives in File Explorer under This PC.

How to run Disk Utility on Mac

Open Finder, go to Applications, then Utilities, and double-click Disk Utility. In the left sidebar, select the drive you want to check — usually Macintosh HD or the name of your internal drive. Click the First Aid button at the top of the window.

Disk Utility will ask for permission to repair the drive. Click Run. The scan begins when ready and shows progress as it works. Most scans finish in under five minutes, though larger drives or drives with many errors may take longer.

When First Aid finishes, it displays a message saying the drive is okay or listing the errors it found and fixed. If the message says the drive needs to be repaired but Disk Utility cannot repair it, your drive may be failing. Back up your data to an external drive or cloud storage right away.

If you cannot start your Mac normally, you can run Disk Utility from Recovery Mode. Restart your Mac and hold Command + R when ready after you hear the startup sound. When the macOS Utilities window appears, select Disk Utility and follow the same steps above.

What to do before you start a disk check

Close all open programs and save any work you have not yet saved. A disk check requires exclusive access to the drive, which means no other program can read from or write to it while the scan runs. If you have files open, Windows or Mac will force you to restart anyway.

Plug in your laptop if you are using one. A disk check can take an hour or more on a large drive, and you do not want the battery to die halfway through. A power loss during a disk check can leave the drive in a worse state than before you started.

Back up important files to an external drive or cloud storage if you have not done so recently. If the disk check finds errors it cannot repair, you may need to replace the drive, and you want your data safe before that happens.

Understanding disk check results

If the scan finishes and reports no errors found, your drive is healthy. You can continue using your computer normally. Run a disk check every few months as preventive maintenance, or whenever you notice slowdowns or freezing.

If the scan finds errors and repairs them, note how many errors were fixed. One or two errors are usually not a concern — they happen occasionally on any drive. If the scan finds dozens of errors or the same errors appear after you run the check again, the drive may be failing and you should plan to replace it soon.

If the scan cannot repair errors, or if it reports bad sectors, the drive is deteriorating. Back up your data when ready and consider replacing the drive within the next few weeks. A failing drive can suddenly become unreadable without warning.

When to run a disk check

Run a disk check if your computer freezes, takes a long time to start, or crashes unexpectedly. These are often signs of drive errors. A disk check can fix the problem and restore normal speed.

Run a disk check after a power failure or forced shutdown. When your computer loses power suddenly, the drive may have incomplete write operations that create errors. A scan catches these before they cause problems.

Run a disk check every three to six months as routine maintenance, even if your computer seems to be working fine. Catching small errors early prevents them from becoming large problems that slow your system or cause data loss.

Do not run a disk check constantly. Running it once a month is reasonable; running it every day is unnecessary and wastes time. Your drive does not degrade faster because you check it, but you also do not need to check it more often than necessary.

Disk check versus defragmentation

A disk check and defragmentation are different tools that do different jobs. A disk check finds and repairs errors in the file system. Defragmentation reorganizes files on the drive so your computer can read them faster. You may need both, but they are not the same thing.

If your computer is slow, run a disk check first to rule out errors. If the disk check finds no problems and your computer is still slow, defragmentation may help — but only on traditional hard drives, not solid-state drives. SSDs do not benefit from defragmentation and do not need it.

Windows 10 and 11 defragment hard drives automatically on a schedule, so you usually do not need to do it manually. Mac does not have a defragmentation tool because modern file systems handle this automatically.

Frequently Asked Questions

How long does a disk check take?

A quick scan on a small or fast drive takes five to fifteen minutes. A full scan with bad sector recovery on a large drive can take one to three hours. The time depends on drive size, drive speed, and how many errors exist. Do not interrupt the scan — let it finish completely.

Can I use my computer while a disk check is running?

No. On Windows, a full disk check runs before the operating system loads, so you cannot use the computer. On Mac, you can use the computer while First Aid runs in the background, but performance will be slow. Close other programs to speed up the scan.

What does it mean if the disk check finds the same errors twice?

Repeated errors in the same location usually mean the drive has a physical problem — a bad sector that cannot be repaired. Back up your data and plan to replace the drive within a few weeks. The drive may fail suddenly.

Do I need to run a disk check if I use cloud backup?

Yes. Cloud backup protects your files from loss, but it does not fix drive errors that slow your computer or cause crashes. A disk check addresses the health of the drive itself, separate from whether your data is backed up.

Can a disk check recover deleted files?

No. A disk check repairs file system errors and bad sectors. It does not recover files you have deleted. If you need to recover deleted files, use recovery software designed for that purpose, and do it before running a disk check.