What clearing your BIOS means and why you might need to do it

Clearing your BIOS means erasing all the custom settings you or a technician have changed in your computer's firmware — the low-level software that runs before Windows or Mac starts up. When you clear it, your computer resets to the manufacturer's original settings. This is different from restarting your computer; it goes deeper, to the layer that controls how your hardware behaves.

You might need to clear your BIOS if you changed settings and your computer won't start, if you forgot a BIOS password, if you're troubleshooting hardware problems, or if you're preparing to sell or give away the machine. Clearing it is also sometimes called a CMOS reset or BIOS reset, depending on your computer's age and manufacturer.

The method you use depends on whether your computer will still start up. If it boots normally, you can clear it from inside the BIOS menu itself. If it won't start, you'll need to open the case and remove a small battery or move a jumper on the motherboard.

Key Takeaways

  • You can clear your BIOS from the settings menu if your computer still starts up, which takes about five minutes and requires no tools.
  • If your computer won't start, you'll need to open the case and remove the CMOS battery for 10 to 30 seconds, or move a jumper if your motherboard has one.
  • Clearing your BIOS erases all custom settings but does not affect Windows, your files, or any programs you've installed.
  • After clearing, your computer may take longer to start the first time as it re-detects your hardware.

How to clear your BIOS if your computer still starts

If your computer boots into Windows or your operating system normally, the easiest method is to reset from inside the BIOS menu. Start by restarting your computer and when ready pressing the key that opens BIOS setup — this is usually Delete, F2, F10, or F12, depending on your manufacturer. You'll see a message on the startup screen telling you which key to press. If you miss it, restart and try again; you have only a few seconds.

Once you're in the BIOS menu, look for an option called "Reset to Defaults," "Load Defaults," "Restore Defaults," or "Factory Reset." The exact name and location vary by manufacturer. On Dell computers, it's often under the Exit menu. On HP or Lenovo machines, check the File menu or look for a dedicated Reset option. Use the arrow keys to navigate and Enter to select. When prompted to confirm, select Yes. Your computer will then restart and explore the factory settings.

After the restart, your computer may take a minute or two longer than usual to start, because it's re-detecting your hardware. This is normal. Once Windows loads, your BIOS is cleared and back to factory settings.

How to clear your BIOS if your computer won't start

If your computer won't boot at all, you'll need to physically reset the CMOS — the chip that stores BIOS settings. This requires opening your computer's case. Shut down the computer completely, unplug the power cable, and wait 30 seconds. Then open the case. On a desktop, this usually means removing the side panel; on a laptop, you may need to remove the bottom panel or keyboard, which varies widely by model. If you're unsure, search your computer's model number plus "open case" or "remove battery" to find instructions specific to your machine.

Look for a small, coin-sized battery on the motherboard — this is the CMOS battery. It's usually silver and round, about the size of a watch battery. Gently pry it out with a plastic tool or your fingernail (not metal, which can cause a short). Leave it out for 10 to 30 seconds, then press it back in. Make sure it clicks into place. If you see a jumper — a small plastic connector on two or three pins near the battery — some motherboards use this instead. Check your motherboard manual to see if yours has a jumper; if it does, move the jumper to the "Clear" position for a few seconds, then move it back.

Once the battery is back in or the jumper is reset, close the case, plug in the power cable, and turn on the computer. It should now boot with factory BIOS settings. The first startup may take longer as the system re-detects hardware.

What happens to your files and programs after clearing BIOS

Clearing your BIOS does not touch Windows, your files, or any programs you've installed. Your documents, photos, email, and software remain exactly as they were. BIOS is a separate layer that sits below the operating system; it only controls hardware settings like boot order, fan speed, memory timing, and security features.

However, if you had changed BIOS settings to work around a hardware problem — for example, disabling a faulty USB port or reducing CPU speed — those workarounds will be gone. Your computer will try to use all hardware normally again, which might cause the original problem to return. If that happens, you may need to troubleshoot the hardware issue itself rather than hiding it in BIOS settings.

Resetting your BIOS password if you're locked out

If you set a BIOS password and forgot it, clearing the BIOS is the only way to regain access. You cannot bypass a BIOS password through Windows or any software method. You must physically reset the CMOS using the battery or jumper method described above. This is why BIOS passwords are considered very find — they're stored in hardware, not software.

After you clear the BIOS and regain access, you can set a new password if you want, or leave it unset. Write down any password you create and store it somewhere safe. If you forget it again, you'll need to open the case again.

Troubleshooting if clearing your BIOS doesn't fix the problem

If your computer still won't start after clearing the BIOS, the problem is likely not a BIOS setting but a hardware failure or a Windows issue. Check that all cables inside the case are firmly connected — power cables to the motherboard and drives, RAM sticks fully seated in their slots, and the power button connector properly attached to the motherboard. Reseat the RAM by removing each stick and pushing it back in firmly until it clicks.

If the computer still won't start, the issue may be a failing hard drive, bad RAM, or a power supply problem. These require hardware replacement or professional diagnosis. If your computer starts but Windows won't load, clearing the BIOS won't help; you may need to repair or reinstall Windows instead.

Frequently Asked Questions

Will clearing my BIOS erase my hard drive?

No. BIOS is firmware on the motherboard; it has no connection to your hard drive or SSD. Your files, programs, and Windows installation remain untouched. Clearing BIOS only resets hardware settings like boot order and fan speed.

How long does it take to clear BIOS?

If your computer starts normally, clearing from the BIOS menu takes about five minutes. If you need to open the case and remove the battery, allow 10 to 15 minutes, depending on how straightforward your case is to open. The actual reset takes only seconds; most of the time is spent navigating menus or disassembling the case.

Can I clear my BIOS without opening the case?

Yes, if your computer still boots into Windows or your operating system. You can reset from the BIOS menu itself without opening the case. You only need to open the case if the computer won't start at all.

What if I can't find the CMOS battery?

Search your computer's exact model number plus "CMOS battery location" or "clear CMOS" to find a diagram specific to your motherboard. Some laptops have the battery in an unusual spot or require removing the keyboard. If you're uncomfortable opening your computer, a repair shop can clear the BIOS for you in about 15 minutes.

Will my computer be slower after clearing BIOS?

No. Clearing BIOS returns your computer to its original factory settings, which is how it performed when new. If anything, it may run slightly faster if someone had disabled hardware features or changed power settings. The first startup after clearing may take longer as the system re-detects hardware, but subsequent startups will be normal.